Introduction: KL100 Industrial Robot Linear Slide can run up to four robots on one linear axis. At the same time, depending on the existing requirements and the working space, several robot positions can be optimally positioned in the linear axes. ROBOTS FOR THE KR AGILUS SERIES.
Features:
flexible
The travel distance of up to 30 meters expands the working space to several times the working range of the robot. Linear slides are the best choice for connecting equipment. For application-related additional equipment, a non-powered slide can be included if required.
highly efficient
By reducing the mass of the bearings and power slides, the performance and energy efficiency are significantly improved.
modularization
The linear slides have a modular construction, which allows them to be arbitrarily lengthened with the help of standard elements.
Precise location
Up to four robots can be operated on a single linear axis. At the same time, depending on the existing requirements and the working space, several robot positions can be optimally positioned in the linear axes.
Job Description:
Load: 100kg; Large range: 1611mm; Number of axes: 1; Repeatability: <±0.02 mm; Installation location: Travel dependent; Speed: 2.5m/s; Degree of protection: IP 65.
Key Features
ROBOTS FOR THE KR AGILUS SERIES
SUITABLE FOR ALL ROBOTS OF THE KR AGILUS SERIES
Up to 4 robots can be configured on a linear axis, mounted on different robot base positions The robot can be equipped with 8 different base positions and can be supplied with an additional unpowered slide table for additional equipment relevant to the application.
Mirrored structure
Execute the mirror motion program.
FEM optimization
The anti-twisting properties are configured according to the FEM study, so they can also be used for precise trajectory applications.
Integrated control system
The control system of the linear unit is integrated in the robot control system in the form of a mathematically coupled axis, so that no additional control system is required.
Built-in e-chain® for floor-mounted models
The e-chain® can be installed very compactly and has a nominal stroke of up to 5500 mm.
Mirrored structure
Execute the mirror motion program.
FEM optimization
The anti-twisting properties are configured according to the FEM study, so they can also be used for precise trajectory applications.
Integrated control system
The control system of the linear unit is integrated in the robot control system in the form of a mathematically coupled axis, so that no additional control system is required.
Built-in e-chain® for floor-mounted models
The e-chain® can be installed very compactly and has a nominal stroke of up to 5500 mm.
Suitable for this field of application:
Handling and handling, other operations, plastic processing equipment, insertion, clamping, other applications, forming machines, metal cutting machines, operation of other machine tools, measuring, testing or inspection.
The company adheres to the concept of quality, customer first, integrity-based, and advocates the concept of harmonious cooperation and development with our customers in good faith.
Your choice is our driving force.
76 Technology gives you the best quality service and looks forward to your call.
|
More on that
|
KUKA KUKA Robot KR 30 Diverse Automation Specialist 16kg 30kg
Description: KUKA KR 30 industrial robots can handle, weld, paste, cast and even sew automatically. With a load capacity of 30 kg and a range of up to 3102 mm as well as flexible installation positions (ground, ...)
|
|
KUKA KUKA industrial robot KR150 R3700 ultra K with a payload of 150 kg
Description: The KUKA industrial robot KR QUANTEC ultra is the most powerful and robust robot in the KR QUANTEC series. Ability to excel in any position – and be just as motivated as the rest of the family ...
|
|
KUKA KUKA KR16 R2010-2 payload 16KG REACH 2010
Description: In the low load class, KUKA robots of the KUKA KR16 R2010-2 series of industrial robots offer a complete range of products with high power density worldwide. The series is streamlined with space-saving units ...
|
|
The KUKA KUKA KR 120 R2900 extra body weighs 1084 kg
Introduction: KUKA KUKA high-payload robot KR120 R2900extra maximizes versatility and flexibility with minimal investment costs. More refined, more compact, more stable. By reducing the weight of moving parts, "KR ...
|
|
KUKA KR510 R3080 has a payload of 510 kg and weighs 2,680 kg
Introduction: The diversity of KUKA robots KR510R3080 heavy-duty robots makes them easy to use in many applications in the heavy-duty sector. Even foundry robots still achieve low cost and high efficiency. KR510R3080 Heavy Machines ...
|
|
KUKA KR6 R700 Load 6KG Robotic Arm Arm Reach 7.067M
KUKA Industrial Robot KR6 R700 Introduction:
Number of axes : 6 Load : 6kg Working area : 706mm Accuracy : 0.03mm Protection level : IP54 Installation : floor-mounted, wall-mounted, upside-down Body weight : 50kg Main application : loading and unloading, material handling, assembly, coating ...
|
|
KUKA KR300-2 PA has a payload of 300 kg and an arm span of 3150 mm
Description: KUKA KR300-2 PA is a depalletizing robot that can be flexibly adapted to a wide range of applications. It also enables fast and accurate loading and packing of high loads. This depalletizing robot can be used in the most ...
|
|
KUKA KUKA KR1000 1300 with a payload of 1300 kg and an arm span of 3202
Description: KUKA KR1000 1300 is a six-axis, heavy-duty robot with an open motion system and a unique load capacity. It can quickly move heavy loads from a distance of up to 6.5 meters. Engine block ...
|
|
KUKA KUKA robot KR 210 R3300 ultra K-F has an arm span of 3301 mm
Description: The KUKA industrial robot KR 210 R3300 ultra K-F is the most powerful, robust and precise robot in the KR QUANTEC series.
The KR QUANTEC ultra has a maximum ...
|
|
KUKA KUKA KR 6 R900 sixx C Crane with a payload of 6 kg
Description: The KUKA KR 6 R900 sixx C has a maximum load capacity of 6 kg and a radius of approx. 901 mm. KR AGILUS IS DESIGNED FOR EXTREMELY HIGH WORKING SPEEDS.
load
Load 6 ...
|
|
KUKA KR 6 R900-2 has a payload of 6 kg and a body weight of 54 kg
Introduction: The KUKA robot KR6R900-2 is suitable for a wide range of new applications thanks to its wide range of applications. Whether on floors, ceilings or walls, it achieves the highest precision thanks to the use of built-in energy chains ...
|
|
KUKA six-axis industrial robot KR 5 arc tandem 5kg
Description: The KUKA KR 5 arc is the smallest robot in the KUKA robot series. Its load capacity of 5 kg is particularly suitable for standard arc welding work. Due to its favorable price, compact size, etc., it is also well suited to your desired application. Whether it's ...
|
|
KUKA KR DELTA hygienic robot with an arm span of 1200 mm
Introduction: The KUKA DELTA robot is designed for sensitive conditions of use. Thanks to its stainless steel body, the KR DELTA is fully equipped for hygiene-sensitive areas, such as direct contact with food, pharmaceuticals or electronic components. The corrosion-resistant stainless steel housing of this robot is in accordance with the German ...
|
|
KUKA Spot Welding Robot KR210 has an arm span of 2696mm
Introduction: Germany KUKA spot welding industrial robot KR210 R2700 EXTRA load 210kg working radius 2696mm KUKA handling industrial robot KUKA palletizing industrial robot
Features:
Industrial Robot Model: ...
|
|
KUKA KR 30-3 has a payload of 30 kg and an accuracy of 0.06 mm
Description: The KUKA KR 30-3 industrial robot is like a performance artist, and its fist-like workspace offers space- and cost-saving equipment solutions for the field of application.
Product parameters
Root...
|
|
KUKA 6-axis industrial robot KR360 R2830 2830mm
Introduction: KUKA KR360 6-axis articulated robot, with a grasping weight of 360KG and an arm span of 2830mm, can be used for factory automation integration and other aspects. The product can be widely used in handling, arc welding, gluing, cutting, painting, scientific research and teaching, machine tool processing and other fields.
|
|
KUKA KRC ROBOTstar 10.4 inches
Introduction: KRC ROBOTstar is based on the KRC4 hardware platform. You will benefit from a wide range of process-oriented application packages on the reisPAD operator interface. The open system communication standard creates ideal conditions for Industry 4.0-compliant production. FOR KRC ROBOT ...
|
|
KUKA KR60 HA Robot with a payload of 60 kg and an arm span of 2033 mm
Introduction: KUKA Robots KR60HA high-precision robots are specially designed for high-precision operation, especially in laser applications or component measurement.
Product parameters.
LOAD 60KG. ...
|
|
KUKA KR 560 R3100-2 HI heavy-duty robot
KUKA KR 560 R3100-2 HI KR FORTEC-2 ultra heavy-duty robot with a rated load of 480-800 kg
KR 560 R3100-2 HI
Rated load 560 kg
Reach 3100 mm
Repeatability ± 0.08 mm
Application Scenarios Universal
Adaptation to the control cabinet type KR ...
|
|
KUKA KUKA industrial robot KR180 R3200 PA with a payload of 180 kg
Introduction: The KUKA KR180 R3200 PA pallet stacking robot meets all the requirements of today's automation systems: smaller footprint, shorter cycle times, availability and lower operating costs. The slender design makes this five-axis machine ...
|
|
Contact
working hours
