Nidec/Nidec Inverter LED & LCD Keyboard Mounts TDF-KB02

Mounting base TDF-KB02 for Nidec inverter LED and LCD keyboards

Nidec/Nidec Inverter LED & LCD Keyboard Mounts TDF-KB02

Rated voltage; Frequency EV1000-4Txxxxx: 380V440V; 50Hz/60Hz EV1000-2Sxxxxx：200V240V； 50Hz/60Hz EV2000-4Txxxxx: 3-phase, 380V440V; 50Hz/60Hz

Allowable voltage operating range EV1000: continuous voltage fluctuation does not exceed ±10%, and temporary fluctuation does not exceed -15%+10%; EV2000: Voltage: 320V460V; Voltage imbalance rate: <3%; Frequency: ±5% Output Voltage Range EV1000-4Txxxxx: 0380V/440V EV1000-2Sxxxxx: 0200V/240V EV2000-4Txxxxx: 0380V/440V Frequency Range 0Hz550Hz Overload Capacity

EV1000: Type G: 150% rated current for 1 min, 180% rated current for 3 sec/1 sec (380V/220V series); P type: 120% rated current for 1 minute EV2000: G type: 150% rated current for 1 minute, 200% rated current for 0.5 seconds, P type: 5.5kW 132kW: 120% rated current for 1 minute, 160kW and above: 110% rated current for 1 minute; 150% rated current for 1 second Main control performance Modulation Magnetic flux vector PWM modulation Speed range 1:100 (EV2000) 1:50 (EV1000) Starting torque EV1000: 150% rated torque at 1Hz

EV2000: 180% of rated torque at 0.50Hz Steady-state accuracy of operating speed ≤±0.5% of rated synchronous speed (EV2000) ≤±1% of rated synchronous speed (EV1000) Frequency accuracy Digital setting: 0.01% ×*** high frequency; Analog setting: ±0.2%×*** high frequency Frequency resolution Digital setting: 0.01Hz; Analog setting: *** high frequency × 0.1% Torque increase Automatic torque increase, manual torque increase 0.1%30.0% V/F curve Four modes: 1 user-set V/F curve mode and 3 torque reduction characteristic curve modes (2.0 power, 1.7 power, 1.2 power) Acceleration and deceleration curve Three modes: linear acceleration and deceleration, S-curve acceleration and deceleration and automatic acceleration and deceleration mode;

Four acceleration and deceleration times, time unit (minutes/second) optional, *** long 60 hours DC braking EV1000: DC braking start frequency: 0.0060.00Hz, braking time: 0.160.0 seconds, braking action current value: G type: 0.0 150.0%, P type: 0.0130.0% EV2000: DC braking start frequency: 060.00Hz, braking time: 45kW and below: 0.060.0 seconds, rest: 0.030.0 seconds, braking current: G type: 0.0100.0%, P type: 55kW and below: 0.0100.0%, 75kW and above: 0.080.0% Jog

Jog frequency range: 0.10Hz50.00Hz, jog acceleration and deceleration time can be set 0.160.0 seconds, jog interval time can be set Multi-stage speed operation Multi-stage speed operation through built-in PLC or control terminal, seven-stage frequency can be set Built-in PI can easily form a closed-loop control system Automatic energy-saving operation Automatic optimization of V/F curve according to load conditions to achieve energy-saving operation Automatic Voltage Adjustment (AVR) When the grid voltage changes, it can automatically keep the output voltage constant Automatic current limiting Automatic current limit during operation to prevent frequent overcurrent fault tripping Automatic Carrier Adjustment Automatically adjust the carrier frequency according to the load characteristics;

Optional Customer-specific Functions Textile Swing Frequency Textile Swing Frequency Control, which can realize the center frequency adjustable swing frequency function Fixed-length control The inverter stops after reaching the set length Sag control It is suitable for multiple inverters to drive the same load Tone Adjustment Adjust the tone of the motor when it is running Instantaneous stop and non-stop control In the event of instantaneous power failure, uninterrupted operation is achieved through bus voltage control Bundling function The running command channel and the given frequency channel can be arbitrarily bundled and switched synchronously. Operation Functions Running Command Channel Given operation panel, given control terminal, Given serial port, it can be switched in a variety of ways Frequency given channel Digital given, analog voltage given, analog current given, pulse given, serial port given, can be switched at any time in a variety of ways Auxiliary frequency given Realize flexible auxiliary frequency fine-tuning and frequency synthesis Pulse output terminal 050kHz pulse square wave signal output, which can realize the output of physical quantities such as set frequency and output frequency Analog output terminal 2 analog signal outputs, 0/420mA or 0/210V can be selected respectively, and the set frequency can be realized, output frequency and other physical quantities of the output Operation Panel LED display 20 parameters such as set frequency, output frequency, output voltage, output current can be displayed. LCD Display Optional, Chinese/English prompt operation content (EV1000 does not have this option) Parameter Copy Parameters can be quickly copied using the LCD operation panel (this function is not available on the EV1000) Key Locking and Function Selection Partial or full locking of keys, defining the range of action of some keys,

to prevent misoperation Protection Functions Phase loss protection (optional), over-current protection, over-voltage protection, under-voltage protection, over-temperature protection, overload protection, etc. Optional Accessories LCD operation panel, brake assembly, remote control box, remote cable, communication bus adapter, etc. Environment Places of use Indoors, not exposed to direct sunlight, no dust, corrosive gases, flammable gases, oil mist, water vapor, dripping water or salt, etc. Altitude Below 1000 meters Ambient temperature -10°C+40°C (ambient temperature is 40°C50°C, please derate it) Humidity Less than 95%RH, no condensation of water beads Vibration Less than 5.9 m/s2 (0.6G) Storage temperature -40°C+70°C Structure Protection Rating IP20 Cooling EV1000: Fan cooled, free cooling EV2000: Forced air cooled with fan control

Installation method: wall-mounted, mounted cabinet-mounted

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

Nidec/Nidec Inverter LED & LCD Keyboard Mounts TDF-KB02

Sections viewed

Contact

working hours