Introduction: Weidmuller SAKPE clamping frame grounding terminal block SAKPE 4
Product parameters
Order number | 1124450000 | type | SAKPE 4 | GTIN (EAN) | 4032248985869 | quantity | 100 pc(s). | Local products | Only available in select countries |
deep | 40.5 mm | Depth (inches) | 1.594 inch | Depth (with DIN rail) | 41 mm | height | 51 mm | Height (inches) | 2.008 inch | width | 6.1 mm | Width (inches) | 0.24 inch | net weight | 10.58 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Installation: | Snap directly onto the rail | Stops | Can be screwed |
Strip length | 10 mm | Crimp range, maximum | 4 mm² | Crimp range, minimum | 0.5 mm² | Crimp the screws | M 3 | Maximum crimping area of conductor AWG | AWG 10 | Minimum crimping area of the conductor AWG | AWG 22 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 4 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 4 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 0.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 4 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 0.5 mm² | Wiring cross-sectional area, stranded wire, maximum | 4 mm² | Wiring cross-sectional area, stranded wires, minimum | 0.5 mm² | Maximum crimping area for flexible wires | 4 mm² | Maximum tightening torque | 0.8 Nm | Minimum cross-sectional area of stranded conductors | 0.5 mm² | Minimum tightening torque | 0.5 Nm | Measuring gauge according to 60 947-1 | A3 | Number of junctions | 2 | The type of join | Screw connection | Connection direction | Horizontal line entry |
Maximum crimping area of conductor AWG | AWG 10 | Minimum crimping area of the conductor AWG | AWG 22 | guide rail | TS 35 | standard | IEC 60947-7-2 |
Rated cross-section | 4 mm² | Voltage rating of adjacent terminals | 800 V | standard | IEC 60947-7-2 | Volume resistivity according to IEC 60947-7-x | 1 mΩ | Rated surge voltage of adjacent terminals | 8 kV | Power losses are in accordance with IEC 60947-7-x | 1.02 W | Pollution level | 3 | Overvoltage rating | III |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller SAKPE clamping frame grounding terminal block SAKPE 4 products, if you are interested in Weidmuller terminal blocks, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience
|
More on that
|
Weidmuller ZVLD 2.5 has a nominal cross-section of 2.5 mm²
Introduction: The Weidmuller ZVLD 2.5 is a universal wiring system for all common conductor connection types. The flexibility of shrapnel wiring makes it a beneficial wiring option.
|
|
Weidmuller APGTB 2.5 PE 4C/2 pluggable
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller W clamping frame feed-through terminal block WDU 4 has a rated current of 32A
Introduction: Weidmuller W clamping frame feed-through terminal block WDU 4
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Benefit...
|
|
Weidmuller APGTB 2.5 2T 4C/2 BL 24A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Germany Weidmuller/Weidmüller terminal block ZPE 16 net weight 48.672g
Introduction: The Weidmuller ZPE 16 is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
Weidmuller Z Tension Clamp Feed-Through Terminal Block ZDU 16 BL has a rated current of 76A
Description: Weidmuller Z push-through terminal block ZDU 16 BL
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller A2T 1.5 FT-PE DL rated voltage 500V
Description: Weidmuller terminal block A2T 1.5 FT-PE DL, Feed-through terminal, Double-level terminal, PUSH IN, 1.5 mm², 500 V, dark beige
Features:
Feed-through terminal blocks with protection function are a kind of electrical ...
|
|
Weidmuller Z Tension-Clamp Feed-Through Terminal Block ZEI 16 BL Rail TS35
Description: Weidmuller Z Tension Clamp Feed-Through Terminal Block ZEI 16 BL
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller A Push-in alternating terminal block AAP22 10 LO-LO
Description: Weidmuller A Push-in Alternate Terminal Block AAP22 10 LO-LO
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standard of service, and seek to do a good job in every service process.
|
|
Weidmuller terminal block A3C 6 PE surge voltage 8 kV
Introduction: The Weidmuller A3C 6 PE is an in-line tension clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller modular terminal block A2C 35 PE 35mm²
Product Introduction: Power Feed35 mm²Our wide range of W-series terminal blocks as well as our main harness breakout terminals are optimally designed to ensure convenience and space savings at the same time, ensuring safe and convenient wiring at the power feed.
Dimensions and weight
...
|
|
The Weidmuller APGTB 1.5 FT 3C/1 net weight 4.7 g
Introduction: The Weidmuller A2T terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Germany Weidmuller/Weidmüller terminal block ZDK 1.5 shrapnel connection 17.5A
Introduction: The Weidmuller ZDK 1.5 uses a push-in tension-clamp connection with tension-clamp technology, which is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
Weidmuller W clamping frame feed-through terminal block WDU 2.5N OR
Introduction: Weidmuller W Clamping Wire Frame Feed-Through Terminal Block WDU 2.5N O
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller ZDU 1.5 has a nominal cross-section of 1.5 mm²
Introduction: The Weidmuller ZDU 1.5 is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
Weidmuller A3C 1.5 rated current 17.5 A
Introduction: The Weidmuller A3C 1.5 is a push-in tension-clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high pull-out force of the conductor ...
|
|
Weidmuller ADT 4 2C BL 500V/24A
Introduction: The Weidmuller ADT uses the PUSH IN technology to connect the dome with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ZTTR 2.5 cross-section 2.5 mm²
Introduction: The Weidmuller ZTTR 2.5 is a universal wiring system for all common conductor connection types. The flexibility of shrapnel wiring makes it a beneficial wiring option.
|
|
Weidmuller SAKPE clamping frame grounding terminal block SAKPE 6
Introduction: Weidmuller SAKPE clamping frame grounding terminal block SAKPE 6
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
The Weidmuller W clamping wire frame switch-type terminal block WTR 2.5/ZZ has a rated current of 16A
Introduction: Weidmuller W clamping wire frame switch-type terminal block WTR 2.5/ZZ
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Contact
working hours
