Fujifilm inverter FRN90F1S-4C 90KW 380V
In the past, the energy-saving function of the inverter was to minimize the loss of the motor unit according to the load state.
The newly developed °FE Jiang C-P series has updated its focus and considered the inverter itself as one of the electrical products. Not only does it minimize the loss of the motor, but it also minimizes the power consumption of the inverter (the most suitable is the minimum power consumption control).
External signals are used to operate, stop, and set the frequency
[Wiring Sequence]
(1) Wiring the main circuit.
[How to Operate]
(1) Running and stopping: Operate or stop through the key operation (key) of the operation panel.
(2) Frequency setting: Use the key to set the frequency.
Note 1) When connecting a DC reactor (DCR) (option), remove the short circuit between terminals P1-P(+) and connect them. For inverters over 75kW, the DCR is a standard accessory, so be sure to connect it.
Note 2) To protect wiring, install a recommended circuit breaker (MCCB) or residual current circuit breaker (ELCB) (with overcurrent protection function) on the input side (primary) of each inverter. Do not use circuit breakers above the recommended capacity.
Note 3) If you want to use the inverter to switch off the power supply, install the recommended electromagnetic contactor (MC) in addition to the MCCB or ELCB if necessary. When the coils of the MC and solenoid are installed near the inverter, be sure to use the surge absorber and take care to connect them in parallel.
Note 4) If you want the main circuit power supply of the inverter to be turned on, only the control circuit is running, and the inverter is in standby mode, please connect it here. It is only necessary to complete the wiring of the main circuit part, and the inverter can be operated without connecting the main terminals.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow!
In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
FujiElectric is a small-capacity IPM for air conditioners
Introduction: FujiElectric small-capacity IPM for air conditioners
Features of the product:
(1) Energy conservation by reducing power loss
Equipped with the 6th generation V-series IGBT chips, it is energy-saving by reducing power loss at low loads (APF: Annual Energy Consumption ...
|
|
FujiElectric Inverter FRN280G1S-4C
Introduction: FujiElectric Dynamic Torque Vectoring is a drive control technology. The control system calculates the power required for the motor load at high speed, controls the voltage and current vectors, and maximizes the output torque of the motor. Using Fujifilm's original control method, it can ...
|
|
FujiElectric Inverter FRN3.7E1S-4C 2.2kw
Introduction: FujiElectric Inverter FRN3.7E1S-4C is suitable for a variety of mechanical devices such as lateral conveyance machinery, fans, water pumps, centrifuges, and food machinery to meet various needs such as high performance, system support, energy saving, labor saving, and overall cost reduction. A wide variety of ...
|
|
FujiElectric Elevator Inverter FRN18.5LM1S-4C
Fuji Inverter FRN18.5LM1S-4C Elevator Inverter 18.5KW AC380V Three-Phase
The FRENIC-LFT series, which is a special inverter for elevator traction machines, has a variety of features such as greatly reducing torque ripple compared to our company's conventional products, and is sure to be compatible with customers' systems.
|
|
FujiElectric Inverter FRN7.5LM1S-4C
Fuji Inverter FRN7.5LM1S-4C Elevator Inverter 7.5KW AC380V
Specially designed for passenger elevator use
●Full series of brake units are built-in
●PG feedback circuit is incorporated as standard
●Compatible with the optional operation panel
High performance
●Overload capacity: 200%-10s
...
|
|
FujiElectric FJ series economical electromagnetic contactors
Introduction: FJ series is a mini type AC contactor · thermal overload relay that pursues miniaturization, safety, environmental protection, and practicality. (Applicable motor capacity: AC440V 2.2~45kW)
Product Picture Show:
Specifications:
In order to...
|
|
FujiElectric C2S Inverter FRN0004C2S-4C
It is suitable for a variety of mechanical devices such as transverse handling machinery, fans, water pumps, centrifuges, food machinery, etc
It meets various needs such as high performance, system compatibility, energy saving, labor saving, and overall cost reduction.
In addition to the 200V series (single-phase), the 400V series has also been ...
|
|
FujiElectric FRENIC5000G11S series inverters
Introduction: FujiElectric adopts Fuji Electric's original dynamic torque vectoring control method, which can achieve a starting torque of 200% at 0.5Hz. It has many convenient features including the self-tuning function. Small, fully enclosed protective structure (22KW), capacity range 0. ...
|
|
FujiElectric Inverter FVR3.7S1S-4C
Product parameters
Brand: FUJI/Fujitsu
Model: FVR3.7S1S-4C
Product family: S1S
Scope of application: general
Number of phases of power supply: three phases
Rated voltage: three-phase AC380V
Applicable motor power: 3.7kW
Power supply ...
|
|
FujiElectric 90KW Inverter FRN0168F2S-4C
Fujifilm 90KW inverter FRN0168F2S-4C pump fan is suitable for upgrading and replacing F1S series
The FRENIC-VP series is a frequency converter for fans and pumps designed for the Chinese market.
This time, in order to enhance our competitiveness against local Chinese manufacturers and European manufacturers, we have carried out a redesign ...
|
|
FujiElectric FRENIC-Multi inverter
Introduction: FujiElectric FRENIC-Multi environmental protection inverter, green inverter, simple operation, simple wiring, longevity is optimized, shortening the equipment maintenance cycle
Product Picture Show:
Features:
Easy to operate, wiring ...
|
|
FujiElectric FRENIC5000VG7S Inverter-Frequency +5%~-5%
Introduction: FujiElectric FRENIC5000VG7S inverter - frequency +5%~-5%, the pursuit of the world's best control performance and functions, rich networking functions, equipped with inverter support input program
Product Picture Show:
Product Features ...
|
|
FujiElectric's FVR-Micro series is a small-capacity, general-purpose compact inverter
Introduction: FujiElectric FVR-Micro series small-capacity general-purpose compact inverter, economical inverter with low initial cost and good effect. The small size is easy to operate and easy to wiring. Ideal for the performance of the transverse moving machine
Product Picture Show:
...
|
|
Fuji Electric FRENIC-Lift inverter for elevators
Introduction: Fuji Electric FRENIC-Lift elevator inverter, with a large reduction of torque ripple and other characteristics, play a more excellent function and characteristics, three-phase 400V, input AC voltage, 380V~480V 50/60Hz, capacity, 5.5kW-30kW
Product Pictures ...
|
|
FujiElectric F2S Fan Water Pump Inverter FRN0025F2S-4C
FujiElectric F2S Fan Water Pump Inverter FRN0025F2S-4C
Voltage level: three-phase 380-415VAC
Rated power: 11kW
Rated current: 25A
Degree of protection: IP20
Application Type: Fan Water Pump
The company has always been customer-centric, for customers ...
|
|
FujiElectric FRN0240F2S-4C Inverter for Water Pump Fans
132KW new Fuji Electric FRN0240F2S-4C water pump fan suitable inverter
The FRENIC-VP series is a frequency converter for fans and pumps designed for the Chinese market.
This time, in order to enhance the competitiveness of local Chinese manufacturers and European manufacturers, we have carried out a redesign design, ...
|
|
FujiElectric E2S Inverter FRN0085E2S-4C
FujiElectric E2S Inverter FRN0085E2S-4C
Voltage level: three-phase 380-415VAC
Rated power: 45kW
Rated current: 85A
Degree of protection: IP20
The company has always been customer-centric, creating value for customers, quality and service.
|
|
FujiElectric SJ series high-sensitivity contactors
Introduction: FujiElectric's SJ series of high-sensitivity contactors with low power consumption and high sensitivity (1.4W for 0G type, 2.4W for 1SG type) can directly drive a coil through the output from a PC transistor, with an operation indicator (06G type), and a built-in surge absorption function
Product Picture Show:
...
|
|
FujiElectric Inverter FRN0072E2S-4C
FRN0072E2S-4C Fuji inverter three-phase 380V inverter
Fujifilm FRNENIC-Ace is a new generation of standard inverters for fans, pumps, and special purpose machines.
Multi-function operator panel (optional)
There are two types of multi-function operation panels.
Multi-function with LCD screen ...
|
|
FujiElectric High-Performance Inverter FRN0105E2S-4C
Fuji Electric high-performance inverter FRN0105E2S-4C
Voltage level: three-phase 380-415VAC
Rated power: 55kW
Rated current: 105A
Degree of protection: IP20
The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.
|
|
Contact
working hours
