Casper/casappa synchronous motor PLD20/4/CS-GE/11,2-GD/*4/VPEF120

CASAPPA Cast Iron Hydraulic Shunt Motor HDD30.51-MC+51-MC-C3030-MD+51-MC+51-MC-E Technical Parameters: Displacement: 51cc/rev Rated pressure: 310 bar Relief valve pressure: The relief valve can be customized according to the needs of the fast Installed port size: inlet MD, degreaser M...

The gear pump and motor are made of cast iron and are divided into three parts. Extremely versatile and reliable design, also suitable for the most extreme operating conditions. Displacements from 1.05 in³/rev (17,28 cm³/rev) to 7.66 in³/rev (125,63 cm³/rev) are available for 30 and 35 ...

Introduction: The swash plate design of Casper/casappa TVP series variable axial piston pumps is ideally adapted to the application of open hydraulic systems in trucks. This compact design allows it to be mounted directly on the PTO. Features: ...

Casper/casappa Gear Pump PLP30.25D0-83E3 Geometric displacement: 25cc/rev Rated pressure: 230 bar Pump body material: aluminum alloy body Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of ...

Introduction: Casper/Casappa Formula [FP] Gear Pump A gear pump is a rotary pump that relies on the change and movement of the working volume formed between the pump cylinder and the meshing gear to convey or pressurize the liquid. It consists of two gears, the pump body and the front and rear covers to form two enclosed spaces, when the gears rotate, the gears ...

CASAPPA synchronous motor PLD20/2/CS-GE/16-GD/16-GD/VPEF206 The two motors work synchronously, and the hydraulic oil with the same flow rate and the same pressure can make the two actuators in the hydraulic system work synchronously. Displacement: 25ml/rev, Pressure: 230bar Relief valve setting ...

CASAPPA Gear Pump PLP20.25S0-31S1-LGE/GD-N-EL Displacement: 14,4cc/rev PRESSURE: 250BAR Rotation : Left rotation Installation: Rectangular flange at the motor connection end It can completely replace Italy brands such as Mazucchi, Gotek, Grande Kinsa, Odendevers, Wivor, Roots, etc.

Product introduction: Aluminum alloy gear pump and gear motor, the pump body is composed of three parts, which is high-strength aluminum alloy. A variety of international standard shafts, flanges and ports are available (including SAE, DIN, EUROPEAN and other standards), which can be used in a wide range of applications. Displacements range from 0.07 in³/rev (1, ...

CASAPPA synchronous motor PLD20/4/CS-GE/14-GD/14-GD/14-GD//14-GD/VPEF190, abbreviated model PLD20/4/CS-GE/14-GD/*4-VPEF190 The 2 motors work synchronously, and the hydraulic oil with the same flow rate and the same pressure can synchronize the 2 actuators in the hydraulic system.

CASAPPA High Pressure Gear Pump PLP20.16D0-82E2-/EA-N-EL Displacement: 16,3cc/rev PRESSURE: 250BAR Installation: Rectangular flange at the motor connection end It can completely replace the gear pumps of Italy brands such as Matsucchi, Gotek, Dakinsa Odendos, Vivor, Roots, etc CA ...

Casappa gear pump PLP10.3, 15 D0-86E7-LBB/BA-N-EL Gear pump displacement: 3,15 cc/rev Rated pressure: 250 bar Peak pressure: 270 bar Pump type: Gear pump, designed for lubrication systems or small power packs Mounting shaft: taper shaft Port form: German standard ...

Italy CASAPPA gear pump PLP10.2,5-D0-81E1-LBB/BA-N-EL belongs to small hydraulic gear pump, Suitable for all kinds of small power packs and lubrication systems. Hydraulic pump displacement of 2,5cc/rev, *high pressure of 28MPA, The mounting shaft belongs to the taper shaft, the taper is 1:8, and the oil port is flanged ...

Introduction: Casper/Casappa Variable Swash Plate Axial Piston Pumps MVP-MVPD Series This compact design allows for direct mounting on the engine. The new "MVPD" series has a higher flow rate than conventional pumps of the same size, allowing for higher rotational rates without compromising the hydraulic system design.

Introduction: Casper/Casappa Polaris Hydraulic Gear Pumps use 3D computer-aided design, which allows us to insert components into hydraulic circuits using 3D modeling and virtual simulation. This means that this approach can invest less time in manufacturing a better quality product. Polaris Pump ...

Drive mode: magnetic Number of impellers: Multi-stage Pump shaft position: side vertical Flow: 35 Weight: 35kg Specifications: General Main downstream platforms: wish Usage: Chemical pump Our customer-centric service concept: a full range of services are pursued as a high...

Introduction:Casappa [K] Gear Pump A gear pump is a rotary pump that relies on the change and movement of the working volume formed between the pump cylinder and the meshing gear to convey or pressurize the liquid. It consists of two gears, the pump body and the front and rear covers to form two enclosed spaces, when the gears rotate, the gears ...

Introduction: Casper/Casappa Variable Swash Plate Axial Piston Pump Boda [LVP] series is suitable for medium and high pressure open circuits. Features: energy conservation Low noise Short response time It can be equipped with bearings, and can bear ...

casappa gear pump PLP10.2-D0-81E1-LBB/BA-N-EL FS Displacement: 2cc/rev PRESSURE: 280BAR Installation: Rectangular flange at the motor connection end It can completely replace the gear pumps of Italy brands such as Matsucchi, Gotek, Dakinsa Odendos, Vivor, Roots, etc CASAPPA ...

Cast Iron Gear Pump & Gear Motor KAPPA Compact Series KP30.41-05S6-LMF/OD-BSL/30.24-BSH/OB/OC/X-N-LN-80E-D Twin pump combination: front pump displacement 41cc; The tail pump has a displacement of 24cc Two-stage cast iron gear pump and gear motor. Casappa Gear Pump Compact ...

The synchronous motor displacement is; 31.5cc/rev Working pressure: 200 bar Motor structure: 2 gear type aluminum alloy synchronous motor, oil port is two inlets, two outlets, two relief valves The port sizes are: G3/4 inch thread for the inlet port G1/2 inch thread for the working port, ...