Description: The E+H/Endershaus ultrasonic flow meter Proline Prosonic Flow W 400, the Prosonic Flow W 400 is ideal for the measurement of conductive and non-conductive liquids and is ideal for safety, economy and low maintenance.
Features:
Based on the FlowDC optimization algorithm, the length requirement of the straight pipe section before the flowmeter is shortened
Cost-effective: the larger the pipe diameter, the lower the cost of use (up to DN 4000/160")
High signal stability over the long term: Installed outside the pipeline, maintenance-free
Reliable measurement, independent of the material of the installed pipes: GRP pipes and plastic pipes
Safe operation: Equipped with a backlit display with touch key operation, there is no need to open the meter during operation
Trouble-free remote access: Web server support
Heartbeat Technology: comprehensive self-diagnosis, self-monitoring, self-verification
Product parameters
Measuring principle
Ultrasonic flow measurement
Product Title
Clamp-on meters with heartbeat technology and web servers for the water and wastewater industry.
Due to the short inlet run time of the FlowDC.
Bi-directional measurement of water and wastewater as well as process water and hydroelectric power plants.
Sensor features:
Low capital investment – cost-effectiveness increases with increasing pipe diameter (up to DN 4000/156"). Long-term stable signal – maintenance-free, permanent installation from the outside by means of coupling pads. Reliable measurement of a wide range of pipe materials – sensors for GRP and plastic pipes are available.
There is no interruption to the process when installing. Wide nominal diameter range: DN 15 to 4000 (160/130 to 266"). Medium temperatures up to +<> °C (+<> °F).
Transmitter features:
Safe operation – no need to turn on the device thanks to the touch-controlled, backlit display. Full remote access – web server. Integrated diagnostics, validation and monitoring – heartbeat technology.
The transmitter housing is made of durable polycarbonate or aluminum. Remote version for wall mounting. Integrated data logger: Measured value monitoring.
Nominal caliber range
DN15 to 4000 (1/2 to 160")
Sensor material
Clamping system:
Sensor Holder 1.4301 (304), 1.4404 (316L)Sensor Housing 1.4301 (304), 1.4404 (316L)Strapping 1.4301 (304), 1.4404 (316L)
Measure variables
Volume flow, flow rate, sound velocity
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus Ultrasonic Flow W 400 product, if you are interested in E+H/Endershaus Ultrasonic Flow Meter, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Thermal mass flow meter Proline t-mass 65F
Description: The E+H/Endershaus thermal mass flow meter Proline t-mass 65F has a built-in device specifically designed for direct mass flow measurement of industrial gases and compressed air. By lowering the typical turndown ratio of 100:1, operating flow rates and offline leakage can be accurately measured. Built-in gas ...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11371
Introduction: E+H/Endershaus Conductive Limit Detection Single-rod Probe 11371, 11371 probe is used for limit detection of food liquids, such as milk, beer, juice, etc. The probe is made of corrosion-resistant insulating material with CIP/SIP function, making it ideal for use in the food industry.
Give birth...
|
|
E+H digital dissolved oxygen sensor Memosens COL37E is IP68 rated
Description: E+H/Endershaus digital dissolved oxygen sensor Memosens COL37E, fluorescence dissolved oxygen sensor Memosens COL37E is easy to operate and easy to maintain. Oxygen concentration measurements can be performed quickly with simple adjustments.
Features:
Zero Flow Type C Fluorescent Cap ...
|
|
E+H/Endershaus Gauge Pressure Sensor Cerabar PMC51 Range: 100mbar – 40bar
Description: The E+H/Endershaus gauge pressure sensor Cerabar PMC51 digital pressure transmitter with oil-free capacitive ceramic measuring cell, mainly used in the process and hygiene industries, measures the pressure, level, volume and mass of liquids and gases. The PMC51 uses a vacuum-resistant ceramic diaphragm ...
|
|
E+H/Endershaus Radar Level Gauge Micropilot FMR62B
Introduction: E+H/Endershaus Radar Level Sensor Micropilot FMR62B, Micropilot FMR62B is a member of the new generation of 80 GHz radar level sensors. Continuous non-contact level measurement in demanding liquids, high temperatures, high pressures, and difficult media.
|
|
E+H/Endershaus Flow switch Flowphant® T DTT31 Maximum process pressure 120 bar
Introduction: E+H/Endershaus Flow Switch Flowphant® T DTT31 This flow switch is designed for the safe measurement, display and monitoring of the mass flow of liquid media with negligible pressure loss. Selectable 1-2 switching outputs, or 1 switching output and 1 standard analog output ...
|
|
E+H/Endershaus digital ORP electrode Memosens CPS92E with IP68 degree of protection
Description: E+H/Endershaus Digital ORP sensor Memosens CPS92E, Memosens CPS92E with integrated platinum electrode is particularly suitable for the measurement of media with high suspended solids concentrations, such as dispersions, precipitates or emulsions.
Features:
Memosens 2.0 supports the number of extensions ...
|
|
E+H/Endershaus Float switch Liquifloat FTS20
Introduction: E+H/Endershaus float switch Liquifloat FTS20, FST20 float switch for liquid limit detection, simple operation, economical and practical. It can be used as a pump protector in tank and vessel measurement, or as an open pool level alarm, e.g. in sewage treatment plants. Should...
|
|
E+H/Endershaus Bar Protector TA566 Insertion depth 900 mm
Introduction: E+H/Endershaus Bar Protective Sleeve TA566 Because of the harsh process conditions, the strength of the protective sleeve must be precisely calculated. Dyeing penetration test, ultrasonic test, helium leak test, pressure durability test, and various non-destructive material tests to prove the material and workmanship.
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass I 500
Description: The E+H/Endershaus thermal mass flow meter Proline t-mass I 500, t-mass I uses a patented sensor design and is inserted into the pipe for mass flow measurement based on the thermal principle with ultra-high measurement stability. It is able to effectively compensate for changes in process conditions in real time ...
|
|
E+H/Endershaus digital pH sensor Memosens CPS31D with IP68 degree of protection
Description: E+H/Endershaus digital pH sensor Memosens CPS31D, Memosens CPS31D digital pH sensor for use as a pH compensation electrode in the disinfection process.
Features:
Three-ceramic diaphragm structure, which can be used for the measurement of low conductivity media, and the measurement results are reliable ...
|
|
E+H/Endershaus differential pressure transmitter Deltabar PMD78B has a turndown ratio of 100:1
Introduction: E+H/Endershaus differential pressure transmitter Deltabar PMD78B, PMD78B is one of the members of the new generation of Deltabar transmitters. The transmitter is rugged and features a secure Bluetooth connection, allowing you to remotely control the instrument using a mobile device and installing an app. Support on-demand ...
|
|
E+H/Endershaus Modular RTD Thermometer TR24
Introduction: The E+H/Endershaus modular RTD thermometer TR24 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, with enhanced ...
|
|
E+H/Endershaus hydrostatic level gauge Deltapilot FMB51 has a turndown ratio of 100:1
Description: E+H/Endershaus Hydrostatic Level Gauge Deltapilot FMB51, Deltapilot FMB51 rod sensor with CONTITE measuring cell with fixed process connection, mainly used in the environmental protection industry, for measuring the level of liquids or slurry media in open or closed containers ...
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11961Z
Introduction: E+H/Endershaus Conductive Limit Detection Single Rod Probe 11961Z, 11961Z High Corrosion Resistance Probe Body and Insulation Layer are made of anti-corrosion materials and can be used for corrosive media measurement. The insulation is made of ceramic and can be used in steam boilers.
Features:
Pole...
|
|
E+H/Endershaus Protective Sleeve for Temperature Sensor TW12 Insertion depth 4 mm
Introduction: E+H/Endershaus Thermowell TW12, the metal booting is an essential component for temperature measuring points in almost all industrial processes, especially in the fine chemical industry. It protects the measuring cell or sensor element from corrosion by the process medium and prevents the temperature sensor from being ...
|
|
E+H/Endershaus vibrating point level measurement FTL325N
Introduction: The E+H/Endershaus Vibrating Limit Measurement FTL325N, the Nivotester FTL325N switch unit is used for point level detection in liquid storage tanks, for use in explosion hazard areas, and also for overfill protection of toxic flammable or non-flammable liquid tanks.
Features:
Ni ...
|
|
E+H/Endershaus analogue conductivity sensor Condumax CLS19 with IP65 degree of protection
Introduction: E+H/Endershaus Analog conductivity sensor Condumax CLS19, the Condumax CLS19 is an all-in-one structural conductivity measurement sensor with a low measuring range.
Features:
Reliable and precise measurement of low conductivity media
Best price/performance ratio
...
|
|
E+H/Endershaus Flow switch Flowphant® T DTT35 Maximum process pressure 120 bar
Introduction: The E+H/Endershaus flow switch Flowphant® T DTT35 is designed for the safe monitoring and display of liquid mass flow in hygienic processes in the beverage industry, e.g. for monitoring cooling water circulation systems and filtration. Selectable 1-2 switching outputs, or 1 switching output ...
|
|
E+H/Endershaus mass flow meter Proline Promass A 300 with a pressure of 430.9 bar
Description: The E+H/Endershaus mass flow meter Proline Promass A 300 is ideal for continuous process control under harsh conditions. The single-tube flowmeter with its unique self-emptying function enables high-precision measurement of liquids and gases in very small flows, and can also be used at high pressures.
|
|
Contact
working hours
