Rexroth/Rexroth Oil Pump Hydraulic Pump A10VSO28 Discharge Caliber: 30

Product Introduction Product characteristics: cast iron Principle: Piston pump Drive mode: hydraulic Number of impellers: single stage Pump shaft position: side vertical type Flow rate: 28 Weight: 25 Specifications: Variable displacement open pump Usage: Pipeline pump ...

Introduction: The single-axis converter XCS in the ctrlX DRIVE portfolio generates a DC bus voltage from the supply voltage and converts it into an AC output voltage with variable frequency amplitude for the operation of servo motors. The DC bus voltage generated in the device can be used to supply other XMS uniaxial ...

Product Introduction It is used to measure and display the pressure in the hydraulic system Pressure display bar / MPa A manometer is a pressure measuring instrument that is used to measure and display pressure in a hydraulic system Performed according to standard EN 837-2 Stainless steel housing 　　Products...

Product Introduction The main task of an external gear motor is to convert hydraulic energy (flow and pressure) into mechanical energy (torque and speed). In order to reduce energy losses, Rexroth has designed externally meshing gear motors with extremely high efficiency. This high efficiency is achieved through pressure-related ...

Parameter introduction: Nominal displacement: 10 18 28 45 60 63 72 85 100 Rated pressure: 25MPa **High pressure: 31.5MPa Rated speed: 2300-3600r/min Speed range: 2500-4320r/min Applications: ...

Product Introduction Applications: It is mainly used in aerospace, metallurgy, electric power, coal, petroleum, chemical industry, injection molding, steel, automobile and other fields 　　Specifications: Nominal displacement: 10 18 28 45 60 63 72 85 100 Rated pressure: 25MPa ...

Product Introduction Platform N Fixed displacement Size 20 ... 36 Continuous pressures up to 250 bar Intermittent pressures up to 280 bar

Product Introduction Suitable for high-pressure motors integrated into mechanical gearboxes Size 60 ... 215 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits ...

peculiarity Interface: G 1/4 Maximum operating pressure 310 bar (4495 psi) Flow rate up to 20 l/min (5 gpm) Structure size 4 　　parameter Product range classification: 3/2-way/position, switching valve Product family type: VS70 ...

Applications: It is mainly used in aerospace, metallurgy, electric power, coal, petroleum, chemical industry, injection molding, steel, automobile and other fields 　　Product Introduction: Nominal displacement: 10 18 28 45 60 63 72 85 100 Rated pressure: 25MPa **High pressure ...

The A2FM is a fixed motor with an axial tapered piston gyratory body with an inclined shaft design for hydrostatic drives in open and closed circuits. On the axial plunger unit with an inclined shaft design, the plunger is arranged at an angle to the drive shaft. The plunger is directly supported on the propeller shaft ...

Summary: The MSK series motors are distinguished by their wide power range and limited size increments. The high torque density of these synchronous servo motors contributes to a particularly compact design with a maximum torque of 495 Nm. ...

Product Introduction Product characteristics: cast iron Principle: Piston pump Drive mode: hydraulic Number of impellers: single stage Pump shaft position: side vertical type Flow rate: 28 Weight: 25 Specifications: Variable displacement open pump Usage: Pipeline pump ...

Product Introduction Industrial hydraulic valves in the high performance range. Reliably throttle the volumetric flow to the set point. Nominal size 16, A1 → A2, B1 → B2 or A2 → A1, B2 → B1, mechanically operated Hexagon spindle Direct sales 　　Product parameters Join...

Product Introduction It is suitable for high-voltage motors installed in confined spaces Size 22 ... 500 Nominal pressures up to 400 bar Pressures up to 450 bar Open and closed circuits ...

Summary: The MSK series motors are distinguished by their wide power range and limited size increments. The high torque density of these synchronous servo motors contributes to a particularly compact design with a maximum torque of 495 Nm. ...

Product Introduction The A2FM is a fixed motor with an axial tapered piston gyratory body with an inclined shaft design for hydrostatic drives in open and closed circuits. On the axial plunger unit with an inclined shaft design, the plunger is arranged at an angle to the drive shaft. Plunger straight ...

Product Introduction Suitable for medium-voltage motors integrated into mechanical gearboxes Size 10 ... 63 Nominal pressure 280 bar Maximum pressure 350 bar Open and closed circuits ...

peculiarity With 3 pressure ranges, to meet different customer requirements and applications, due to the use of concave mounting flange, the structure is very space-saving, the power density is very high, the total efficiency is very high, the initial efficiency is high, and the optional integrated flushing, wide and firm 40 bend shaft design technology, bent shaft design. ...

Product Introduction Industrial hydraulic valves in the medium performance range. Reliable switching of oil flow direction according to hydraulic symbols. Nominal size 6, symbol C, electromagnetic operation, 24 V DC. Direct sales Spool valves 　　Product parameters Connection diagram: ISO 4401-03-02-0-05 ...