Moore/Murr Redundancy Module 85496 Input voltage 24VDC

Create Date: 2024-8-30 12:03:23|Source: Murr

Previous
Next
Brand:
Murr

Origin:
Germany

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Redundancy module 85496

Product Introduction
Moore/Murr Redundancy Module 85496 Output voltage: 24 V DC (18...30 V DC)

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: MURR/MURR Redundancy Module 85496, power systems are typically redundant with two power supply units for maximum machine uptime. The active redundancy module MB Redundancy Balance from Moir Electronics decouples two independent power supply units and generates a redundant 24 V DC control voltage.

Moore/Murr Redundancy Module 85496 Input voltage 24VDC

Features:

Input: 24 V DC (SELV/PELV)

Output: max. 2× 20/1× 40 A

Low Loss (MOSFET-Technology)

Product parameters

Input voltage: 24 V DC (18...30 V DC)

Protection against reverse potential: max. 30 V DC

Input current: 2× 20 A

Total Current: max. 40 A

Output voltage: 24 V DC (18...30 V DC)

LED Indication: LED (Red/Green)

Alarm Output: Each channel triggers an output alarm (relay contact) for output voltage/load distribution

Output current: 26 A (-25...+40 °C)

Parallel/series: 2 units 40 A (-25...+60 °C); 52 A (-25...+40 °C)/-

Standards: EN 61000-6-2, EN 61000-6-3

Mounting: DIN-rail mounting TH35 (EN 60715)

Temperature range: -25 to +60 °C (storage temperature -40 to +85 °C)

Relative humidity: 5... 95%, non-condensing

Efficiency: 99.5%

Connection: Spring-loaded terminals

Bridging concept: on both sides, with spring crimping or bridging device (max. 40 A)

This article introduces the Moore/Murr redundancy module 89552, if you are interested in the Moore/Murr redundancy module, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience

More on that

	Murr/Murr EMC Suppressor Module 20031 Maximum power 25W Introduction: Moore/Murr EMC Suppressor Module 20031 Features: 230 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 110... 250 V AC/DC Maximum Power (W): 25 W (V ...
	Moore/Murr Power Supply 85678 Protection IP67 　Introduction: Moore/Murr Power Supply 85678 Features: Emparro®67 Hybrid 2× MICO M12 IOL M12 (female) 5-pin, L-coded Current: 10 A INPUT: 90...265 V AC/90...265 V DC OUT ...
	Moore/Murr EMC Suppressor Module 26507 Introduction: Moore/Murr EMC Suppressor Module 26507 Features: 230 V AC/DC VDR For other configurations and voltages, please enquire. Product parameters Input voltage: 110... 253 V AC/DC Temperature range: -20...+70 ...
	Germany Moore/Murr output relay 52104 DIN-rail mounting Introduction: Germany Moore/Murr output relay 52104, each system will contain different kinds of interface modules. Relay modules are often used to isolate two different levels of voltage. The control side is electrically isolated from the load side by means of a module, so that it cannot be broken down by fault voltages. These modules ...
	Moore/Murr MEF Power Interference Filter 10416 50-60 Hz Description: The Moore/Murr MEF power interference filter 10416 is suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, with overvoltage protection with monitoring function Features: Suitable for both single-phase and three-phase power supplies Recommended for all fieldbus lines ...
	The Murr/Murr PROFINET managed switch 58855 weighs 0.916 kg Introduction: PROFINET managed switches are high-performance managed switches that are equipped with PROFINET functions and certifications in addition to a wide range of network tools. They connect a variety of fieldbus modules and allow you to convert the line topology to a star/tree topology. This saves installation effort and long ...
	Murr/Murr EMC Suppressor Module 236082 Frequency 50... 60 Hz Introduction: Mul/Murr EMC Suppressor Module 236082 Features: 3× 400 V AC 3× 575 V AC RC Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. ...
	Murr/Murr Xelity 8TX Unmanaged Switch 58812 100Mbit Summary: Unmanaged switches are ideal for any network where configuration or diagnostic capabilities are not critical. They are quick and easy to install and offer a variety of styles. The new XELITY switches are manufactured at the Murrelektronik headquarters in Auburnweiler. It is high quality, 100% tested and technical...
	Moore/Murr MEF Power Interference Filter 10535 Leakage current max. 10mA Description: Moore/Murr MEF Power Supply Interference Filter 10535, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting Features: Suitable for both single-phase and three-phase power supplies Push...
	Moore/Murr EMC Suppressor Module 23035 Introduction: Moore/Murr EMC Suppressor Module 23035 　　Features: 3× 575 V AC RC Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. For DIN-rail mounting ...
	Moore/Murr EMC Suppressor Module 21202 28×8.6×32mm Introduction: Moore/Murr EMC Suppressor Module 21202 Features: 230 V AC/DC RC Product parameters Input voltage: 127... 250 V AC/DC Dimensions H×W×D: 28×8.6×32 mm Applicable contactors: 3 RH 1/1 ...
	Moore/Murr EMC Suppressor Module 21222 37.5×36×27.5mm Introduction: Moore/Murr EMC Suppressor Module 21222 Features: 230 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 127... 250 V AC/DC Material: Flame retardant plastic Basis ( ...
	Moore/Murr TREE 8TX Unmanaged Gigabit Switch IP40 Description: Moore/Murr TREE 8TX unmanaged Gigabit switches, automatic proximity detection, quick and easy replacement of defective components, prioritization of PROFINET messages Features: Configure via a web server Protocols: DHCP, SNMP (v1, v2c, ...)
	Moore/Murr EMC Suppressor Module 20002 30×20×13mm Introduction: Moore/Murr EMC Suppressor Module 20002 Features: 230 V AC/DC RC For other configurations and voltages, please enquire Product parameters Input voltage: 110...250 V AC/DC Material: Flame retardant plastic according to (UL 9 ...
	Moore/Murr TREE 8TX METAL Unmanaged Switch 58152 8-port Summary: Unmanaged switches are ideal for any network where configuration or diagnostic capabilities are not critical. They are quick and easy to install and offer a variety of styles. Power is supplied to the IP67 switch via the output port of the fieldbus module. ...
	Germany Moore/Murr electronic interference suppression module 23115 frequency 10-400Hz Introduction: Germany Moore/Murr electronic interference suppression module 23115, reduce the incidence of failures during operation and operation, and increase reliability Features: Meets EMC standards Reduce voltage peaks Prevent short circuits in the coil Meets EMC standards Fall...
	Murr/Murr EMC Suppressor Module 26182 Size 30×20×13mm Introduction: Moore/Murr EMC Suppressor Module 26182 Features: 110 V AC/DC VDR For other configurations and voltages, please enquire. Product parameters Input voltage: 48... 130 V AC/DC Material: Flame retardant plastic Basis ( ...
	Murr/Murr EMC Suppressor Module 9126183 Size 42×45×31mm Introduction: The 9126183 of the Moore/Murr EMC suppressor module Features: 3× 575 V AC RC Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. Product parameters Frequently...
	The Murr/Murr NLS power supply 85400 has an output current of 0.5A Introduction: The Moore/Murr NLS power supply 85400, these units are not only extremely reliable, but also very efficient due to their integrated backup power supply. At the same time, they do not require much space in the cabinet. Features: MTBF is about 1,000,000 hours Integration...
	Moore/Murr EMC Suppressor Module 26504 Introduction: Moore/Murr EMC Suppressor Module 26504 Features: 24 V AC/DC VDR + LED Product parameters Input voltage: 12... 70 V AC/DC Dimensions H×W×D: 28×8.6×32 mm Applicable contactors: 3 RH ...