Germany Moore/Murr electronic interference suppression module 23115 frequency 10-400Hz
Create Date: 2024-8-30 12:03:23|Source: Murr
  • Brand:
    Murr/Murr, Germany
    Origin:
    Germany
    Price:
    Please contact customer service
    Delivery time:
    Please contact customer service
    Model:
    Electronic Interference Suppression Module 23115
    Product Introduction
    The Germany Moir/Murr electronic interference suppression module 23115 optimizes and reduces the effects of interference by adjusting the inductive load
    quality assurance

    quality assurance

     Attentive service

    Attentive service

     Secure transactions

    Secure transactions
Product Description
Introduction: Germany Moore/Murr electronic interference suppression module 23115, reduce the incidence of failures during operation and operation, and increase reliability
Germany Moore/Murr electronic interference suppression module 23115 frequency 10-400Hz

Features:

Meets EMC standards

Reduce voltage peaks

Prevent short circuits in the coil

Meets EMC standards

Reduce voltage peaks

Prevent short circuits in the coil

EMC Murer Electronics solves the interference problems of your equipment

Optimize and reduce the impact of interference by adjusting the inductive load

The prefabricated modules are easy to install – they can be installed anytime, anywhere

Reduce the incidence of failures and increase reliability during operation and operation

Increase component life and reduce maintenance costs

Our suppressors are suitable for all standard inductive loads

Suitable for contactors

Integrated system solutions for all standard contactors

Universal suppressors can be snapped onto or attached to the mounting surface of a contactor or relay

Suitable for electric motors

The suppressor can be installed directly next to the source of the interference or in the terminal box of the motor

The motor contactor has 10 pins and 1 ground connection point and has a built-in suppression module and prefabricated cables

The suppressor itself integrates a system concept that is directly connected to the contactor

The universal suppressor snaps directly next to the motor contactor

Suitable for valves

The suppressor is simply installed in the middle of the valve and valve connector to replace the commonly used flat gasket

Product parameters

　　3× 400 V AC

　　VDR

For DIN-rail mounting, Art.-No. 20900 Fits feet

Suppressors for other voltages, frequencies, and motor power need to be customized. RC suppressors must not be used in inverter motors.

Technical data

Frequency 10... 400 Hz

Input voltage 400... 400 V AC

Material Flame retardant plastic according to (UL 94)

Encapsulant: Two-component water-based epoxy resin

General data

Mounting DIN-rail TH35 (EN 60715)

Temperature range -20...+60 °C

Connection approx. 200 mm, single core 0.35 mm², with U-type crimp terminal M4

Dimensions H×W×D 43×15×40 mm

This article introduces the Germany Moir/Murr electronic interference suppression module 23115, if you are interested in Moore/Murr relay, also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business

More on that
Germany Moore/Murr intelligent current divider MICO 9000-41034-0100600 Germany Moore/Murr intelligent current divider MICO 9000-41034-0100600

Introduction: Germany Moore/Murr intelligent current divider MICO 9000-41034-0100600 Features: Monitor, detect, respond Murrelektronik's MICO+ is an intelligent current divider module for 24V DC applications. This cabinet component can monitor currents up to ...
Moore/Murr EMC Suppressor Module 21222 37.5×36×27.5mm Moore/Murr EMC Suppressor Module 21222 37.5×36×27.5mm

Introduction: Moore/Murr EMC Suppressor Module 21222 Features: 230 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 127... 250 V AC/DC Material: Flame retardant plastic Basis ( ...
Moore/Murr EMC Suppressor Module 23100 Frequency 10... 400Hz Moore/Murr EMC Suppressor Module 23100 Frequency 10... 400Hz

Introduction: Moore/Murr EMC Suppressor Module 23100 Features: 3× 400 V AC VDR For DIN-rail mounting, 2×Art.-No. 20900 Fits feet Suppressors for other voltages, frequencies, motor power need to be customized ...
Moore/Murr MEF Power Interference Filter 10537 Frequency 50 ... 60 Hz Moore/Murr MEF Power Interference Filter 10537 Frequency 50 ... 60 Hz

Description: Moore/Murr MEF power interference filter 10537, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting Features: Suitable for both single-phase and three-phase power supplies Push...
Murr/Murr EMC Suppressor Module 26001 Maximum power 15W Murr/Murr EMC Suppressor Module 26001 Maximum power 15W

Introduction: Moore/Murr EMC Suppressor Module 26001 Features: 24...240 V DC diode For other configurations and voltages, please enquire. Product parameters Input voltage: 24... 240 V AC Material: Flame retardant plastic Basis ...
Moore/Murr MEF Power Interference Filter 10472 50-60Hz Moore/Murr MEF Power Interference Filter 10472 50-60Hz

Introduction: The Moore/Murr MEF power interference filter 10472 provides damping curves on request to prevent symmetrical interference Features: Suitable for both single-phase and three-phase power supplies Recommended for all fieldbus systems Overvoltage protection with monitoring function ...
MURR/MURR MTS single-phase safety transformer 86341 insulation class T40 MURR/MURR MTS single-phase safety transformer 86341 insulation class T40

Introduction: A Moore/Murr MTS single-phase safety transformer is a device that isolates electrical components from the public power grid, but supplies them in the same way. This allows for safe work on the electrical system with live electricity. An isolation transformer consists of two separate coils or two parts ...
MURR/MURR Power Supply 85011 Protection IP20 MURR/MURR Power Supply 85011 Protection IP20

Introduction: Moore/Murr Power Supply 85011 Features: INPUT: 3× 360...520 V AC / 480...745 V DC OUTPUT: 48...56 V DC Current: 20 A Product parameters Installation: DIN-rail mounting TH35 (EN ...
Murr/Murr EMC Suppressor Module 26723 Maximum power 200W Murr/Murr EMC Suppressor Module 26723 Maximum power 200W

Introduction: Moore/Murr EMC Suppressor Module 26723 Features: 230 V AC/DC VDR For other configurations and voltages, please enquire. Product parameters Input voltage: 130... 250 V AC/DC Material: Flame retardant plastic Basis ...
Moore/Murr MEF Power Interference Filter 10460 Operating voltage up to 250VAC Moore/Murr MEF Power Interference Filter 10460 Operating voltage up to 250VAC

Introduction: Moore/Murr MEF power supply interference filter 10460, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting Features: Suitable for both single-phase and three-phase power supplies Push...
Moore/Murr EMC suppressor module 236116 Moore/Murr EMC suppressor module 236116

Introduction: The 236116 of the Moore/Murr EMC suppressor module Features: 3× 400 V AC 3× 575 V AC RC For DIN-rail mounting, Art.-No. 20900 Fits feet Suitable for other voltages, frequencies, motor functions ...
Moore/Murr EMC Suppressor Module 26502 Moore/Murr EMC Suppressor Module 26502

Introduction: Moore/Murr EMC Suppressor Module 26502 Features: 24 V AC/DC Diodes/Zener diodes Product parameters Input voltage: 12... 240 V DC Dimensions H×W×D: 28×8.6×32 mm Applicable Contactors ...
Murr/Murr EMC Suppressor Module 26724 Maximum power 200W Murr/Murr EMC Suppressor Module 26724 Maximum power 200W

Introduction: Moore/Murr EMC Suppressor Module 26724 Features: 400 V AC/DC VDR For other configurations and voltages, please enquire. Product parameters Input voltage: 230... 420 V AC/DC Material: Flame retardant plastic Basis ...
MURR/MURR EMC Suppressor Module 23112 Size 25×25×40mm MURR/MURR EMC Suppressor Module 23112 Size 25×25×40mm

Introduction: Moore/Murr EMC Suppressor Module 23112 Features: 3× 575 V AC VDR Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. Product parameters Lose...
Murr/Murr MTS single-phase safety transformer 86345 with 250 volt amperes Murr/Murr MTS single-phase safety transformer 86345 with 250 volt amperes

Introduction: A Moore/Murr MTS single-phase safety transformer is a device that isolates electrical components from the public power grid, but supplies them in the same way. This allows for safe work on the electrical system with live electricity. An isolation transformer consists of two separate coils or two parts ...
Murr/Murr EMC Suppressor Module 236082 Frequency 50... 60 Hz Murr/Murr EMC Suppressor Module 236082 Frequency 50... 60 Hz

Introduction: Mul/Murr EMC Suppressor Module 236082 Features: 3× 400 V AC 3× 575 V AC RC Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. ...
Moore/Murr EMC Suppressor Module 23164 Moore/Murr EMC Suppressor Module 23164

Introduction: Moore/Murr EMC Suppressor Module 23164 Features: 3× 575 V AC VDR Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. Product parameters Frequently...
Murr/Murr EMC filter 10511 operating frequency 50-60Hz Murr/Murr EMC filter 10511 operating frequency 50-60Hz

Introduction:Moore/Murr EMC filter 10511, this series of three-phase first-order EMC filter MEF 3/1 is used to suppress the cable in the 0.1...30 MHz frequency range, interference from the main circuit, power supply, control system etc. These filters are suitable for TN-S, TN-C-S, and TT ...
Moore/Murr MB CAP Superbuffer Module 85460 Input current 3A Moore/Murr MB CAP Superbuffer Module 85460 Input current 3A

Summary: Voltage drops can have a number of negative effects: interrupting the production process, causing downtime and requiring a system reset. It can even lead to data loss and machine damage. Moore Electronics' buffer modules protect the power supply by bridging the power outage time, or to ...
Murr/Murr EMC Suppressor Module 20100 Maximum power 15W Murr/Murr EMC Suppressor Module 20100 Maximum power 15W

Introduction: Moore/Murr EMC Suppressor Module 20100 Features: 48 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 12... 53 V AC/DC Material: Flame retardant plastic According to (UL ...
CATEGORIES BYPASS

Brand Home

Moore products

Moore Information

Customer Service Center

Online Consultation:QQ

ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

 Contact number QQ consultation
QQ consultation

3271883383

 Company address

Wuhan 76 Technology Co., Ltd |Customer Service Hotline: 13522565663|Email:ronglove999@outlook.com

All products on this site are from the official website or the Internet, because there are too many types, only part of it is sent as an example! If there is any violation, please contact to delete!

Back to top