Mitsubishi servo motor MR-JE-300C three-phase AC 170V/11A

Introduction: MR-JE-300C servo motor has a maximum input pulse frequency of 4Mpulses/s (differential pulse) and 200kpulses/s (open collector), and the allowable frequency fluctuation is within ±5%, and it is connected to the master station and personal computer (supported by MR Configurator2).

Mitsubishi Electric MR-JE-300C

Product parameters

[Output]

. Rated voltage: three-phase AC 170V

. Rated current: 11.0 A

[Power Input]

. Voltage: three-phase or single-phase AC200-240V (AC170V-264V) 50Hz/60HZ

. Rated current: 14 A

. Allowable frequency fluctuation: within ±5%.

[Power supply for interface] DC24V ±10% (Required Power Capacity: 0.3A)

[Control mode] sine wave PWM control | current control method

[Capacity regeneration capacity of the power supply for the interface] 14 A

[Dynamic brake] built-in

[Communication Function]

. Etharnet: Connect to master, PC, etc. (supported by MR Configurator2)

. USB: Connection to PC, etc. (MR Configurota2 support)

[Encoder Output Pulse] Yes (ABZ Phase Pulse)

[Position Control Mode]

. Maximum input pulse frequency: 4 Mpulses/s (differential pulse), 200 kpulses/s (open collector)

. Positioning feedback pulse: Encoder resolution (resolution per revolution of servo motor): 131072pulses/rev

. Command pulse rate: electronic gear A/B times A=1-16777215, B=1-16777215, 1/10<A/B<4000

. Positioning completion width setting: 0pulse - ±65535pulses (in command pulses)

. Error is too large: ±3 turns

. Torque limit: parameter setting or setting with external analog input (DC0 - +10V/maximum torque)

[Speed Control Mode]

. Speed control range: analog speed command 1:2000, internal speed command 1:5000

. Analog speed command input: DC0 - ±10V/rated speed (speed under 10V is [Pr.PC12], can be changed)

. Speed Volatility:

± 0.01% or less (load fluctuation: 0%-100%), 0% (power fluctuation: ±10%)

±0.2% or less (ambient temperature: 25°C±10°C) for analog speed commands only

. Torque limit: parameter setting or setting with external analog input (DC0 - +10V/maximum torque)

[Torque Control]

. Analog torque command input: DC0 - ±8V / maximum torque (input impedance: 10kΩ - 12kΩ)

. Speed Limit: Parameter setting

[Trajectory Position Control Mode]

. Command Position Range (set according to the object)

Feed length setting range: -2147483648 - 2147483647 pulse,

The rotation angle can be set in a range of -360.000 - 360.000 degrees

. Instruction magnification: electronic gear A/B times A=1 - 16777215, B = 1 - 16777215, 1/27649< A/B<8484

. Positioning completion width setting: 0pulse - ±65535pulses (in command pulses)

. Error is too large: ±3 turns

. Torque limit: Parameter setting or set according to the object

[Trajectory Speed Control Mode]

. Command speed range: -21474836.48 - 21474836.47r/min (using allowable speed limit)

. Torque limit: Parameter setting or object-specific setting (using maximum torque limit)

[Trajectory Torque Control]

. Command speed range: -3276.8 - 3276.7% (using maximum torque limit)

. Torque limit: Parameter setting or object-specific setting (using allowable speed limit)

[Servo Function]

Advanced Vibration Suppression Control2, Adaptive Filter2, Robust Filter, Auto-Calibration, One-Click Adjustment,

TOUGH DRIVE function, drive recording function, machine diagnosis function, power monitoring function

[Protection Function]

Overcurrent Break, Regenerative Overvoltage Break, Overload Break (Electronic Thermal Relay),

Servo motor overheating protection, encoder abnormal protection, regeneration abnormal protection, undervoltage protection,

Instantaneous power failure protection, overspeed protection, and excessive error protection

[Structure (Degree of Protection)] Strong Cold/Open IP20

[Tight Mounting]

. Three-phase power input: Yes

. Single-phase power input:-

[Weight] 2.1Kg

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.

The above is Mitsubishi servo motor MR-JE-300C three-phase AC 170V/11A products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternity by service, give us a chance, and give you a surprise.

Mitsubishi servo motor MR-JE-300C three-phase AC 170V/11A

Sections viewed

Contact

working hours