Japan SMC cylinder CBG1

Cylinders with a bore ø4 and stroke 5 can also be fitted with two magnetic switches. ・Ø2 quick-change couplings and speed control valves can be connected. ・With magnetic switch (CDJP2 series: CDJP2) Mode of action: double action with single rod Bore bore (mm): 4,6,10,16 76 Technology ...

Metal mounts with both feet and rodless side flanges have been added. ・Magnetic switch operability is improved and position adjustment is easier. ・Magnetic switch track mounting type has been added. ・Added models with rod end metal mounts and swing metal mounts (no need to equip them separately) ・ ...

・Space-saving cylinder with shortened overall length for compact design devices. ・Small magnetic switches can be installed on all 4 sides (2 sides from ø12 to ø25). ・The magnetic switch does not protrude. ・Lightweight: 5-13% reduction (compared to the conventional CQ2) ・Added double earrings ...

By changing the shape of the cylinder head, the maximum mass has been reduced by 10%. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic switch (MDB-Z series: MDB, MDBW, MDBK, MDBKW, MDBB, MDB□Q) Action side ...

This is a space-saving cylinder that is 64% shorter in overall length and 70% smaller in volume than CU. ・With magnetic switch (CDUJ series: CDUJ) Mode of action: Single-rod double-acting/single-acting (spring retractable type) Bore bore (mm): 4,6,8,10,12,16,20 76 Technology provides ...

CDU25-50D Introduction: SMC CU Series 50mm Stroke Double Action Single Rod Pneumatic Multi-Mounting Cylinder CDU25-50D, 25mm Bore Diameter, 0.7 MPa Max Operating Pressure Japan SMC_CDU25-50D picture display Model features introduced CU series cylinders The series CU Liberty Ann ...

Compared to the CS1 series cylinders, the weight is reduced by up to 65%. ・With magnetic switch (CDS2 series: CDS2) Mode of action: double rod double action Bore bore (mm): 125, 140, 160, 180, 200, 250, 320 All suppliers of 76 Technology have been strictly audited ...

Space-saving cylinders that can be mounted directly on multiple sides. ・With magnetic switch (CDU series: CDU, CDUW, CDUK, CDUKW, CDU-A, ZCDUK) Model: Standard Mode of action: double rod double action Bore bore (mm): 6,10,16,20,25,32 Seven or six ...

Short-stroke small cylinders with a shorter overall length The installation space is greatly reduced Miniaturization of equipment ・The current rod end cap can be ordered with the cylinder ・Couplings can be connected (panel mount type) ・Compatible with changes in rod end shape (-XA□) (simple non-standard product) ・NEW ...

Standardization of 4 rail models. There is a wide range of models, which can be selected according to the load quality and the required accuracy. Type: Plain bearing type Operation method: Linear guide type Barrel bore (mm): 10,16 All suppliers of 76 Technology have been strictly audited to ensure that ...

With the new technology, the durability is four times that of the conventional one Reduce the number of maintenances The specifications and mounting dimensions are the same as those of the existing product (Compact Cylinder CQS Series). Form: Long life Mode of action: double action with single rod Bore bore (mm): 12, 16, 20, 25 Seven...

Compatible with micro powders (10-100μm) in general environments. ・The durability in the environment of fine powder is 4 times that of standard products. ・The overall length and mounting dimensions are the same as those of standard products (except for some models). ・A grease film can be formed on the surface of the piston rod to improve durability. ・Anti-...

With the new technology, the durability is more than 4 times that of the previous one Reduce the number of maintenances ・The specifications and dimensions are the same as those of the current product (CM2 series cylinders). Format: Standard type Action mode: double action with single rod Cylinder bore inner diameter (mm): 20, 25, 32, 40 All supplies of 76 Technology ...

GKM10-20 Introduction: SMC GKM Series Rod Clevis Clamp GKM10-20, suitable for 32mm drilling Japan SMC_GKM10-20 picture display Model features introduced fittings The SMCC85 pneumatic cylinder foot mount is sold separately with lock nut or as a pair. Foot mounting, suitable for ...

Foot seat type and flange type are added ・Overall length shortened by up to 97 mm ・Up to 54% weight reduction (0.69 kg → 0.32 kg) ・A variety of cylinder head shapes are available. ・Port size: M5, Rc, NPT1/8 are available ・Optional rod front mounting type ・With magnetic switch (JCDM series)

CDG1BN32-25Z Introduction: SMC CDG1 Series Double Acting Pneumatic Fine Cylindrical Cylinder CDG1BN32-25Z, 25mm stroke, 1 MPa maximum operating pressure, 32mm bore diameter Japan SMC_CDG1BN32-25Z picture display Model features introduced CG1 cylinder SMCCG1 series is a fine...

The protective cover makes it dustproof and water resistant. Seals on the sides prevent foreign objects from entering from the sides. Model: Cam-follower guide type Mode of action: Double acting Bore bore (mm): 16,20,25,32,40,50,63 All suppliers of 76 Technology have been strictly vetted ...

CDQMB16-20 (KIT) Introduction: SMC Pneumatic Guide Cylinder CQM Series CDQMB16-20 Japan SMC_CDQMB16-20 (KIT) photo show Model features introduced SMCCQM Compact Guide/Guide Cylinder SMCCQM Compact Guide/Guide Cylinders can be directly loaded, sideways negative ...

E5040 (KIT) Introduction: SMC E Series Beveled U-Clamp E5040, suitable for 40mm drilling Japan SMC_E5040 (KIT) photo display Model features introduced CP95/CP96 - Annex Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that all suppliers ...

・Standardization of four rail models. ・There is a wide variety of models, and you can choose according to the load quality and the required accuracy. Type: Plain bearing type How to operate: Cam follow-up guide rail type Bore bore (mm): 16,20,25,32,40,50,63 ...