Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1 (2005): 10.9 items, IEC60947-5-8 (2006): 7.1.9 items, reduce the operating force of position 2 and enable long-term operation.
Even at the end of the operation button, a clear and stable sense of operation is achieved.
When OFF (position 1) is released, the ON state structure is not formed. （IEC60204-1 ； 9.2.5.8, IEC60947-5-8; 7.1.9), the auxiliary switch can distinguish between OFF (position 1) in the reset state of the button and OFF (position 3) in the pressing state. (The auxiliary switch has a direct open-circuit operation function) and has a built-in 2-contact that supports loop redundancy. (3 position switches, 2 contacts + push buttons, reset auxiliary switches, 2 contacts + push buttons, auxiliary switches, 2 contacts, maximum 6 contacts).
Waterproof structure (IP65) with rubber sleeve.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Hequan HE2B enabling switch HE2B-M222PY products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7005
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2PN1
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7002
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-VG7Y4M-G Interlock 4 CNT Solenoid Lock
4 Contacts, 2NC 1NO Gate, 1NC Lock, Monitoring Circuit, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7015
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS6B Safety Switch HS9Z-A66
IDEC/Izumi HS6B type safety switch HS9Z-A66 main features: 30mm×15mm×78mm small safety switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. （ISO13849-1, EN954-1）
Plugged in from 2 actuators on request
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20ME
3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2C
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HS5E-KVD003-2C Safety switch with key lock
VD circuit, key removal at LOCK position, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric service concept: ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DT44KMSR-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-H3YD
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS5 series plug-type actuator
There is no need to perform the angle adjustment of the component end, and the position determination is simple and convenient. It can be installed horizontally and vertically, and can be easily mounted on various doors.
Key features:
There is no need to perform the angle adjustment of the component end, and the position determination is simple and convenient.
It can be installed horizontally and vertically, and can be easily installed ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-N44B03-G Safety Switch Spring Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi HE1G-L Hand-held Enabling Switch
With a clear feeling of pressure, the 3-position action can be reliably distinguished. By reducing the load on hand handling, the burden on the user during long-term use is reduced.
Key features:
3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Press OFF (position 3)⇒ Release OFF...
|
|
IDEC/Izumi HE5B enabling switch
Round operating section with ø16 mounting holes for easy installation. Suitable for small teach pendants with 2-contact 3-position switches.
Key features:
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5015
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2A501
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC7902
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 2NO
Environmental Specifications
Degree of protection IP66
...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R44KMSRP-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5D Safety Switch HS5D-11RNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
Contact
working hours
