Rorobot BMC-20006[PAS]

Introduction: Rorobot BMC-2076D5/S 　　Product features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with the soft touch air driver, and the working air pressure can be adjusted using the fingertip distance G. Soft touch materials are divided into conventional type and non-trace type, ...

Introduction:Soft Touch/Rorobot Finger Module FM-B4V1 Features and Applicable Scenarios: Two-finger module combination, compact structure, small space occupation. The spacing and installation angle are not adjustable, which is suitable for clamping tiny, thin and light workpieces. Features: Features and applicable scenarios: two-finger ...

Introduction: Soft Touch/Rorobot Finger Module B3V5, Features and Applicable Scenarios: The module is thinner and lighter, and the installation module finger spacing is only 10mm, which is suitable for clamping small and thin workpieces. It can also be used in series (using screw fitting package PK), but compared to the V4, each finger needs to be supplied with air independently.

　　Introduction: Rorobot B-3B10[H]/S Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use with the soft touch air driver, and the working air pressure can be adjusted with the fingertip distance D. Soft touch materials are divided into conventional [H] and ...

Introduction: Soft Touch/Rorobot Robot Soft Claw FM-A6V3/LS1[H], Soft Finger LS1 flat head horizontal grain is versatile and wear-resistant. It is suitable for the surface of rough workpieces such as food, metal, and plastic parts. When grasping the workpiece, it can greatly reduce the damage caused by the soft finger itself to the workpiece. I...

Introduction: Rorobot BML-4H18[H]/S Product features: The fingertips are open in the positive pressure state and clamped in the negative pressure state, it is recommended to use them with the soft touch air driver, and the working air pressure can be adjusted using the fingertip distance D of the external support. The soft claw material is divided into conventional type [H and non-marking]

Introduction: iPCU2 has two options: standard iPCU2-SMN and high-speed iPCU2-HMN, the high-speed type has a larger vacuum flow rate, suitable for high-speed handling conditions. iPCU2 Passive Drive: Compact soft-touch passive driver. -90~300kPa three-speed adjustable output air pressure range ...

Introduction: Soft Touch/Rorobot Finger F-B5 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...

Introduction: Rorobot B-3C12[H]/S Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use with the soft touch air driver, and the working air pressure can be adjusted with the fingertip distance D. Soft touch materials are divided into conventional [H] and non-trace ...

Introduction: Soft Touch/Rorobot Finger Module FMA5-V3 Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle are adjustable. Product features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing ...

Introduction: Rorobot FM-C4V5/LS1[HAS] Specifications Positive pressure stroke: 24.5mm Negative pressure stroke: 16mm Safe working air pressure: 300kPa Recommended load: 380g Dead weight: 90g Our customer-centric ...

Introduction: Soft Touch/Rorobot Finger Module FMA3-V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP slip mounting plate, finger spacing and angle can be adjusted, Fixing method: can be fixed from four directions (optional), Air intake mode: Air intake connector can be installed from three directions (optional) ...

Introduction: Rorobot Robot BMC-4B32[HAS]/S Features: The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D. Soft claws ...

Introduction: Rorobot Robot Flexible Claw BMC-3G20[H]/S, B-3G20[H]/S is a strong small soft claw that can grasp relatively heavy workpieces externally. Clamping force (0-0.6N) and clamping range (3-13mm), recommended load at 60g. It makes up for the other three-fingered soft claws in grasping ** high negative ...

Introduction: Rorobot Soft Jaw BML-1G071010/S Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G. The soft claw material is divided into conventional type and non-marking type ...

Introduction: Rorobot BMC-2G1211[H] Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use them with the soft touch air driver, and the working air pressure can be adjusted using the clamping fingertip distance G The soft claw material is divided into conventional [H] and ...

Introduction: Rorobot BML-20006 Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use them with the soft touch air driver, and the working air pressure can be adjusted using the clamping fingertip distance G The soft claw material is divided into conventional type and traceless type, and it is used as a ...

Introduction: Soft Touch/Rorobot Flange Connection Module FCM-R02 Product features: It complies with ISO 9409-1:2004 standard (i.e. GB/T 14468.1-2006/) and is suitable for most robot flanges on the market. Light weight, suitable for lightweight multi-joint robots, ...

Introduction: Soft Touch/Rorobot Finger Module B4V4, Features and Applicable Scenarios: Large clamping force, can be used in series (use screw fitting package PK) and simplify the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm. Product features: ...

Introduction: Soft Touch/Rorobot Finger Module FM-B3V2, Features and Applicable Scenarios: Independent installation, can be installed with SMP slip mounting plate, finger spacing and angle are adjustable, Fixing method: can be fixed from four directions (optional), Air intake mode: Air intake joint can be installed from three directions (optional) ...