Description: E+H/Endershaus sensor Memosens CLS82E, Memosens CLS82E is a high-end hygienic sensor for applications with a wide conductivity range.
Features:
Hygienic design, material certification, EHEDG testing, 3-A and FDA certification to ensure GMP compliance. The sensor is resistant to autoclaving and autoclaving.
With Memosens technology, the sensors are equipped with a proprietary adhesion detection function to ensure that the measuring loop is always safe.
With a wide measuring range, a single sensor can reliably monitor critical processes and final rinsing steps, saving costs.
The sensor is compact and can be installed in small-diameter pipes and in small installation spaces.
The sensor cell constant is identified on the certificate of conformity and is precisely adjusted to obtain high-precision measurement results.
Contactless inductive signal transmission with high process and data integrity.
IIoT support: Memosens 2.0 supports extended data storage, storage of calibration and process parameters, and better trend identification, making it the perfect basis for implementing predictive maintenance and advancing IIoT technology.
Product parameters
Measuring principle
Electrical conductivity
apply
Phase separation, chromatography, fermentation in small pipes
CIP monitoring
ultrafiltration
Final rinse
peculiarity
Conductivity sensors with a wide measuring range for all hygienic applications with high requirements for process safety
Measuring range
1 μsec/cm to 500 msec/cm
Measuring principle
Hygienic 4-electrode conductivity sensor
devise
Certified hygienic design with FDA-compliant materials, 3-A and EHEDG approvals, 120 mm sensor with PG13.5 and many other standard process connections are available
Material
Process connection: Stainless steel 1.4435 (316L)
Sensor elements: platinum and ceramic
Dimensions
Sensor diameter: 12 mm (0.47 inch)
Electrode length: Depends on the process connection
Process temperature
Sterilization at -5 to 120 °C (23 to 248 °F): up to 140 °C at 6 bar for up to 45 minutes (up to 284 °F at 87 psi, up to 45 minutes.)
）
Process pressure
17 bar absolute at 20 °C (247 psi at 68 °F) 9 bar absolute at 120 °C (131 psi at 248 °F)
Temperature sensor
Pt1000
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus sensor Memosens CLS82E product, if you are interested in the sensor, please also contact our staff, we look forward to your call, we hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus Ultrasonic Level Measuring Instrument FMU30-AAHEABGHF 4-20 mA
Product introduction: The FMU30-AAHEABGHF all-in-one ultrasonic level measuring instrument is used for non-contact level measurement of liquids, slurries and solids. The sensor emits an ultrasonic pulse signal directly to the surface of the medium. The pulse signal is reflected on the surface of the medium, and the reflected signal is received by the sensor. Ceremony...
|
|
E+H/Endershaus Electromagnetic flowmeter Picomag max. 750 l/min
Introduction: The E+H/Endershaus electromagnetic flowmeter Picomag is widely used in the measurement of conductive liquids in all industries. Picomag's small size and flexible installation make it popular with end users, skid builders, equipment manufacturers and system integrators. It features an advanced and intuitive SmartB...
|
|
E+H/Endershaus Protective Sleeve for Temperature Sensor TA540 Insertion depth 4 mm
Introduction: E+H/Endershaus Temperature Sensor Protective Sleeve TA540, the device is a metal protective sleeve connected using a threaded or flange welding process. The thermometer connection uses NPT female threads, and a variety of flanges of common standards and materials are also available. In heavy-duty applications, the safety ...
|
|
E+H/Endershaus digital total chlorine sensor Memosens CCS120D with a diameter of 25 mm
Introduction: E+H/Endershaus Digital Total Chlorine Sensor Memosens CCS120D Total Chlorine is a general term for residual chlorine and bound chlorine, as well as an indicator of the concentration of residual disinfectant in the discharge water. CCS120D reliably monitor the total chlorine limit at the outlet. Due to the easy replacement of the electrolyte and laminating cap, the ...
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass F 300
Description: E+H/Endershaus Thermal mass flow meter Proline t-mass F 300, t-mass F with patented sensor design for in-line mass flow measurement based on the thermal mass principle with high measurement stability. It effectively compensates for changes in process conditions in real time: temperature ...
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass 65F
Description: The E+H/Endershaus thermal mass flow meter Proline t-mass 65F has a built-in device specifically designed for direct mass flow measurement of industrial gases and compressed air. By lowering the typical turndown ratio of 100:1, operating flow rates and offline leakage can be accurately measured. Built-in gas ...
|
|
E+H/Endershaus Capacitive Limit Detection Minicap FTC262 Maximum tensile strength 3000N
Introduction: E+H/Endershaus Capacitive Limit Detection Minicap FTC262, Minicap FTC262 cable probe is simple and economical for solid bulk material limit detection, especially for corrosive or large amounts of adhesion formed media. This probe is designed for lightweight, solid, ...
|
|
E+H/Endershaus digital conductivity sensor Memosens CLL47E is IP68 rated
Introduction: E+H/Endershaus Digital conductivity sensor Memosens CLL47E, Memosens CLL47E is a four-electrode conductivity sensor for laboratory analysis and field measurements.
Features:
Wide measuring range, suitable for analysis and measurement of a variety of media
...
|
|
E+H/Endershaus Vibratory Measuring Density Calculator FML621
Introduction: E+H/Endershaus Vibrating Measuring Density Calculator FML621, the density calculator can be used to detect all liquid media, calculate the reference density, liquid concentration, and convert the values into different units such as °Brix, °Baumé, °API, etc. Additional software modules support the user ...
|
|
E+H Electromagnetic flowmeter Proline Promag P 500 4 dm³... 9600m³/h
Description: The E+H/Endershaus electromagnetic flowmeter Proline Promag P 500 is designed for the measurement of high-temperature, corrosive media in chemical and process applications. In combination with the innovative split transmitter, the Promag P 500 offers maximum installation flexibility and maximum installation flexibility under demanding conditions.
|
|
E+H/Endershaus multipoint thermometer iTHERM TMS01 MultiSens Flex
Description: The E+H/Endershaus multipoint thermometer iTHERM TMS01 MultiSens Flex is designed to the highest safety standards and can be customized for different applications. Multiple bendable temperature cores enable a comprehensive three-dimensional temperature measurement distribution via a process interface. The meter can be used with ...
|
|
E+H/Endershaus Suspended solids measurement sensor Turbimax CUS51D
Introduction: E+H/Endershaus Suspended solids measurement sensor Turbimax CUS51D, Turbimax CUS51D is a smart sensor for the measurement of solids concentration in suspended solids, which allows unmanned operation during the measurement process.
Features:
One sensor for a wide range of ...
|
|
E+H/Endershaus Electromagnetic Flowmeter Proline Promag 10P medium temperature – 40 to +130 °C
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag 10P is used in a wide range of demanding industries. In combination with the Proma 10 transmitter, which meets the basic requirements and can be directly integrated, the Promag 10P is suitable for the chemical industry and for the measurement of high-temperature, corrosive media.
|
|
E+H/Endershaus mass flow meter Proline Promass O 500 liquid ± 0.0005g/cm3
Description: The E+H/Endershaus mass flow meter Proline Promass O 500 is suitable for the oil and gas industry and provides high-precision measurement of liquids and gases at the highest process pressures. The sensor is perfectly suited for offshore conditions and is resistant to stress corrosion fracture. Promass O 500's ...
|
|
E+H/Endershaus Electronic Vibrating Limit Detection Soliphant FTM50 Solid Tuning Fork Measurement
Introduction: E+H/Endershaus Electronic Vibration Limit Detection Soliphant FTM50, Soliphant M is a rugged tuning fork limit detection switch for solid fines or low-density loose solid powders in silos. It is widely used and has passed the dust, flammable gas, etc.
|
|
E+H/Endershaus industrial thermometer iTHERM ModuLine TM131
Introduction: E+H/Endershaus industrial thermometer iTHERM ModuLine TM131, RTD or thermocouple thermometer with integral sleeve, or installed in a field protective sleeve for use. Optionally installed in a modular transmitter that supports the common communication protocol - Bluetooth® technology, in particular ...
|
|
E+H Pressure Transmitter Cerabar PMP71B Accuracy 0.05%
Description: E+H/Endershaus The Cerabar PMP71B pressure transmitter is part of the new generation of Cerabar transmitters. The transmitter is rugged and features a secure Bluetooth connection, allowing you to remotely control the instrument using a mobile device and installing an app.
Features:
...
|
|
E+H/Endershaus digital pH electrode Ceraliquid CPS41D
Introduction: E+H/Endershaus digital pH sensor Ceraliquid CPS41D, Ceraliquid CPS41D is a high-performance pH sensor for intensive chemically corrosive applications, as well as for the measurement of low conductivity media or high concentrations of organic solvents. The electrode can measure the rapidly changing composition of ...
|
|
E+H/Endershaus vortex flowmeter Proline Prowirl D 200
Introduction: The E+H/Endershaus vortex flow meter Proline Prowirl D 200 can be installed directly between the flanges and is therefore a functional device for auxiliary process applications with low installation costs. The Prowirl D 200 uses true loop-powered technology to seamlessly integrate ...
|
|
E+H/Endershaus differential pressure transmitter PMD75B Accuracy0.05 %
Introduction: The E+H/Endershaus differential pressure transmitter PMD75B is part of the new generation of Deltabar transmitters. The transmitter is rugged and features a secure Bluetooth connection, allowing you to remotely control the instrument using a mobile device and installing an app. Support for on-demand maintenance, improve the plant...
|
|
Contact
working hours
