Japan SMC_MY1B16G-300 Dual Acting, Rodless Actuator, 300mm, Stroke 0.8 MPa

CQ2B50-PS Introduction: SMC CQ2 Series Cylinder Seal Kit CQ2B50-PS for use with 50 mm bore compact cylinders Japan SMC_CQ2B50-PS picture show Model features introduced CQ2 Pneumatic Seal Kit CQ2 series seal kit is an important replacement for SMC compact cylinders.

Space-saving cylinders that can be mounted directly on multiple sides. ・With magnetic switch (CDU series: CDU, CDUW, CDUK, CDUKW, CDU-A, ZCDUK) Model: Vacuum Mode of action: double action with single rod Bore inner diameter (mm): 10,16,20,25,32 76 Science and Technology Institute ...

CDUK10-30D Introduction: SMC CUK Series 30mm Stroke Double Action Single Rod Pneumatic Multi-Mounting Cylinder CDUK10-30D, 10mm bore diameter, 0.7 MPa maximum operating pressure Japan SMC_CDUK10-30D picture display Model features introduced CU series cylinders The series of CUs since ...

It is suitable for use in environments exposed to water and coolant. Magnetic switch with strong water resistance 2-color display. ・Suitable for machine tools, food machinery, car washers, etc. Form: Cylinder with guide rod Mode of action: Double acting Bore I.D.(mm):32,40,50,63,80,10 ...

Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・A model without trunnion mounting holes has been added to the basic model. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...

A water-resistant cylinder with a shape that is easy to clean. ・Not only is the water resistance improved, but the service life is more than 5 times that of conventional cylinders (compared to our products). ・With magnetic switch (HYDB series: HYDB, HYDQB series: HYDQB, HYDC series: HYDC, HYDG series: HYDG). ...

CD85N25-250-B Introduction: SMC C85 Series Double Acting Pneumatic Fine Cylindrical Cylinder CD85N25-250-B, 250mm stroke, 1 MPa max operating pressure, 25mm bore diameter Photo display of Japan SMC_CD85N25-250-B Model features introduced SMCC85 cylinder SMCC85 ...

The piston is oval in shape, saving space. Can be installed in multiple orientations. ・Small magnetic switches can be installed in all four directions. ・The magnetic switch does not protrude out of the body. ・Stroke up to 300 mm. ・With magnetic switch (MDU series: MDU, MDUW) Mode of action: single ...

Short-stroke small cylinders with a shorter overall length The installation space is greatly reduced Miniaturization of equipment ・The current rod end cap can be ordered with the cylinder ・Couplings can be connected (panel mount type) ・Compatible with changes in rod end shape (-XA□) (simple non-standard product) ・NEW ...

Metal mounts with both feet and rodless side flanges have been added. ・Magnetic switch operability is improved and position adjustment is easier. ・Magnetic switch track mounting type has been added. ・Added models with rod end metal mounts and swing metal mounts (no need to equip them separately) ・ ...

CDQMB32-15 Introduction: SMC Pneumatic Guide Rod Cylinder CQM Series CDQMB32-15 Japan SMC_CDQMB32-15 photo display Model features introduced SMCCQM Compact Guide/Guide Cylinder SMCCQM Compact Guide/Guide Cylinder can be directly loaded, and the side load bearing capacity is S...

CG-L020 Introduction: SMC CG Series Axial Leg CG-L020, suitable for 20mm drilling Japan SMC_CG-L020 Picture show Model features introduced CG1 mounting feet (Available in pairs) Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that ...

Neutralize the "eccentricity" or "insufficient parallelism accuracy" of the cylinder. So that the pivot does not need to coincide. Model: Stainless steel type Applicable bore(mm):10,15,16,20,25,32,40,50,63 All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods are ...

It is used in environments where water droplets are splashed on food machinery. ・With magnetic switch (CDJ5/S series: CDJ5・S, CDG5/S series: CDG5・S) Format: Standard Mode of action: Double acting Bore bore (mm): 10,16 All suppliers of 76 Technology have undergone strict ...

CDQ2B50TF-30DZ Introduction: SMC CQ2 Series 1 MPa 30mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B50TF-30DZ, 50mm bore, 68.5 x 71 x 64mm Japan SMC_CDQ2B50TF-30DZ picture display Model features introduced cylinder Compact ...

By changing the shape of the cylinder head, the mass of the cylinder head was reduced by 10%. Models with rod end metal mounts and oscillating metal mounts have been added (no need to be separately equipped). ・With magnetic switch (MDB-Z series: MDB, MDBW, MDBK, MDBKW, MDBB, MDB□Q) Model: Low ...

The square piston is used to achieve compact size and weight reduction Weight: 59% lighter (170g→70g) Overall length: 25% shortened (132mm→99.5mm) Width and height: 23% reduction (24mm→18.4mm) ・Smaller than the current model, but with a higher output ・All 4 sides can be pressed ...

The square piston is used to achieve compact size and weight reduction Up to 49% weight reduction Up to 35% reduction in width Up to 10% reduction in overall length ・It can be installed in 5 directions The hole spacing and hole size for transverse mounting are the same as those of the current CU series ・There is a special system for high interchangeability when it is mounted horizontally.

CD85N10-10-B Introduction: SMC C85 Series Double Acting Pneumatic Fine Cylindrical Cylinder CD85N10-10-B, 10mm stroke, 1 MPa max operating pressure, 10mm bore diameter Japan SMC_CD85N10-10-B photo show Model features introduced SMCC85 cylinder SMCC85 Cylinder Charm ...

Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・Oscillating metal mounts for single earrings and trunnions have been added. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...