The Moore/Murr switching power supply module 85697 has an output voltage of 24 VDC

Description: Moore/Murr MEF Power Supply Interference Filter 10575, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting Features: Suitable for both single-phase and three-phase power supplies Push...

Introduction: A Moore/Murr MTS single-phase safety transformer is a device that isolates electrical components from the public power grid, but supplies them in the same way. This allows for safe work on the electrical system with live electricity. An isolation transformer consists of two separate coils or two parts ...

Introduction: Moore/Murr EMC Suppressor Module 23142 Features: 3× 400 V AC VDR Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. Product parameters Lose...

Introduction: Murr/Murr EMC filter 10538, three-phase 1st stage/2nd order EMC filter MEF is suitable for 0.1... 30 MHz, and suppresses interference in the main power plant, power modules and control systems. They are suitable for TN-C- and IT power supplies. The biggest benefit is that it ensures that the cable cross-section is the most ...

　Introduction: Moore/Murr Power Supply 85678 Features: Emparro®67 Hybrid 2× MICO M12 IOL M12 (female) 5-pin, L-coded Current: 10 A INPUT: 90...265 V AC/90...265 V DC OUT ...

Introduction: Moore/Murr EMC Suppressor Module 22051 Features: 48 V AC/DC 110 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 48... 127 V AC/DC Material:...

Introduction: PROFINET managed switches are high-performance managed switches that are equipped with PROFINET functions and certifications in addition to a wide range of network tools. They connect a variety of fieldbus modules and allow you to convert the line topology to a star/tree topology. This saves installation effort and long ...

Introduction: Moore/Murr EMC Suppressor Module 20687 Features: 300 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 110... 250 V AC/DC Material: Flame retardant plastic Basis ( ...

Introduction: Moore/Murr EMC Suppressor Module 23102 Features: 3× 575 V AC VDR For DIN-rail mounting, 2×Art.-No. 20900 Fits feet Suppressors for other voltages, frequencies, motor power need to be customized ...

Introduction: Murr/Murr EMC Suppressor Module 3124215 Features: 24 V AC/DC LED The plug gasket is removed during assembly, and other color LEDs can be customized Pay attention to the pin arrangement (PE is located on the cable outlet side). 180 ° rotation products to order ...

Introduction: MUR/MURR Redundancy Module 85495, which automatically switches to battery power in the event of a power failure to prevent machine downtime. An investment in a UPS system usually pays for itself the first time downtime is avoided. Features: Input: 24 V DC (SELV/PELV) ...

Introduction: Moore/Murr EMC Suppressor Module 20013 Features: 48 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 24... 48 V AC/DC Material: Flame retardant plastic According to (UL ...

Introduction: Moore/Murr EMC Suppressor Module 20031 Features: 230 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 110... 250 V AC/DC Maximum Power (W): 25 W (V ...

Introduction: Moore/Murr filter 10462 Features: Current: 3 A Can be mounted on rails Attenuation curves are available separately Immunity to differential mode interference Product parameters description Applications Differential Mode Interference: - Frequently switched on and off devices ...

Introduction: For the Moore/Murr Relay/Safety Relay 52050, each system will contain a different kind of interface module. Relay modules are often used to isolate two different levels of voltage. The control side is electrically isolated from the load side by means of a module, so that it cannot be broken down by fault voltages. These...

Introduction: The Moore/Murr MEF power interference filter 10472 provides damping curves on request to prevent symmetrical interference Features: Suitable for both single-phase and three-phase power supplies Recommended for all fieldbus systems Overvoltage protection with monitoring function ...

Introduction: Moore/Murr EMC Suppressor Module 20683 Features: 230 V AC/DC RC For other configurations and voltages Product parameters Input voltage: 110... 250 V AC/DC Material: Flame retardant plastic according to (UL 94) ...

Description: Moore/Murr MEF power interference filter 10463, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting Features: Suitable for both single-phase and three-phase power supplies Push...

Introduction: Moore/Murr MEF power supply interference filter 10460, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting Features: Suitable for both single-phase and three-phase power supplies Push...

Introduction: Moore/Murr EMC Suppressor Module 26507 Features: 230 V AC/DC VDR For other configurations and voltages, please enquire. Product parameters Input voltage: 110... 253 V AC/DC Temperature range: -20...+70 ...