Murr/Murr EMC filter 10538 current 110A

Create Date: 2024-8-30 12:03:23|Source: Murr

Previous
Next
Brand:
Murr

Origin:
Germany

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
EMC filter 10538

Product Introduction
Murr/Murr EMC Filter 10538 Three-phase 1st/2nd order EMC filter MEF for 0.1... 30 MHz, and power to the main facility

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Murr/Murr EMC filter 10538, three-phase 1st stage/2nd order EMC filter MEF is suitable for 0.1... 30 MHz, and suppresses interference in the main power plant, power modules and control systems. They are suitable for TN-C- and IT power supplies. The biggest benefit is that the connection cable is shortened for maximum cable cross-sections (recommended: ground wire < 10 cm). Moreover, the EMC filter can be filtered in both directions. They reduce symmetrical and asymmetric interference, which typically comes from frequency converters and switching power supplies.

Features:

Current: 110 A

1-order

Attenuation curves are available separately

Product parameters

Operating Voltage: max. 3× 600 V AC

Connecting wire diameter: 16... 50 mm² single strand (AWG 5... 0）; 16… 50 mm² multi-strand (AWG 5... 0）

Operating frequency: 50... 60 Hz

Overload current: 18× IN t <= 0.5 ms; 1.5× IN t <= 1 min. (1× hour)

Time loss: max. 10 mA （250 V AC）

Installation: screw fixing

Test insulation voltage: 3.3 kV (L-N), 2 s; 3.1 kV （L-L）， 2 s

Climatic class: 25/085/21 (EN 60068-1)

Connection: Screw connection, contact protection

Dimensions H×W×D: 270×90×150 mm

This article introduces the Moore/Murr EMC filter 10538, if you are interested in the Moore/Murr EMC filter, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience

More on that

	Moore/Murr EMC Suppressor Module 26530 Introduction: Moore/Murr EMC Suppressor Module 26530 Features: 24 V DC Diode + LED For other configurations and voltages, please enquire. Product parameters Input voltage: 12... 30 V DC Material: Flame retardant plastic Basis ...
	Moore/Murr MEF Power Interference Filter 10701 123×50×138mm Description: Moore/Murr MEF power interference filter 10701, suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, overvoltage protection with monitoring function, DIN rail or screw mounting Features: Suitable for both single-phase and three-phase power supplies ...
	Murr/Murr power supply 85099 current 40A Introduction: The MURR/MURR power supply 85099, packaged and compact design, has high resistance to vibration and shock, and the large overvoltage resistance prevents voltage peaks such as lightning strikes in the vicinity Features: INPUT: 3× 360...550 V AC OUTPUT: 24...28 V ...
	Moore/Murr EMC Suppressor Module 26521 Introduction: Moore/Murr EMC Suppressor Module 26521 　　Features: 24 V AC/DC diode Product parameters Input Voltage: 0... 30 V DC Material: Flame retardant plastic according to (UL 94) Damping factor: about 1.5× UN (amount ...
	MURR/MURR Power Supply 85011 Protection IP20 Introduction: Moore/Murr Power Supply 85011 Features: INPUT: 3× 360...520 V AC / 480...745 V DC OUTPUT: 48...56 V DC Current: 20 A Product parameters Installation: DIN-rail mounting TH35 (EN ...
	Moore/Murr TREE 8TX METAL Unmanaged Switch 58152 8-port Summary: Unmanaged switches are ideal for any network where configuration or diagnostic capabilities are not critical. They are quick and easy to install and offer a variety of styles. Power is supplied to the IP67 switch via the output port of the fieldbus module. ...
	Moore/Murr EMC Suppressor Module 21173 Introduction: Moore/Murr EMC Suppressor Module 21173 Features: 110 V AC/DC 230 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 110... 250 V AC/DC Material...
	Germany Moore/Murr output relay 52104 DIN-rail mounting Introduction: Germany Moore/Murr output relay 52104, each system will contain different kinds of interface modules. Relay modules are often used to isolate two different levels of voltage. The control side is electrically isolated from the load side by means of a module, so that it cannot be broken down by fault voltages. These modules ...
	Moore/Murr EMC Suppressor Module 2628421200 Introduction: The 2628421200 of the Moore/Murr EMC suppressor module Features: 24 V AC/DC RC Product parameters Input voltage: 24... 53 V AC/DC Dimensions H×W×D: 28×8.6×32 mm Applicable contactors: 3 RH 1 ...
	Moore/Murr MEF Power Interference Filter 10574 Leakage current max. 15 mA Description: The Moore/Murr MEF power interference filter 10574 is suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, with overvoltage protection with monitoring function Features: Suitable for both single-phase and three-phase power supplies Recommended for all fieldbus lines ...
	Moore/Murr EMC Suppressor Module 23164 Introduction: Moore/Murr EMC Suppressor Module 23164 Features: 3× 575 V AC VDR Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. Product parameters Frequently...
	Moore/Murr MEF Power Interference Filter 10416 50-60 Hz Description: The Moore/Murr MEF power interference filter 10416 is suitable for single-phase and three-phase power supplies, recommended for all fieldbus systems, with overvoltage protection with monitoring function Features: Suitable for both single-phase and three-phase power supplies Recommended for all fieldbus lines ...
	Murr/Murr EMC Suppressor Module 20013 Maximum power 15W Introduction: Moore/Murr EMC Suppressor Module 20013 Features: 48 V AC/DC RC For other configurations and voltages, please enquire. Product parameters Input voltage: 24... 48 V AC/DC Material: Flame retardant plastic According to (UL ...
	Moore/Murr EMC Suppressor Module 23009 Frequency 50-60Hz Introduction: Moore/Murr EMC Suppressor Module 23009 Features: 3× 400 V AC RC single-phase Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors. Product parameters ...
	Murr/Murr EMC Suppressor Module 26663 Maximum power 146W Introduction: Moore/Murr EMC Suppressor Module 26663 Features: 24 V AC/DC VDR For other configurations and voltages Product parameters Input Voltage: 0... 53 V AC/DC Material: Flame retardant plastic according to (UL 94) ...
	Murr/Murr Suppressor 23004 for motors Frequency 50-60Hz Introduction: MURR Suppressor 23004 for electric motors Features: 3× 400 V AC RC Suppressors for other voltages, frequencies, and motor power need to be customized. RC suppressors must not be used in inverter motors. Meet the requirements of EMC...
	The Murr/Murr NLS power supply 85400 has an output current of 0.5A Introduction: The Moore/Murr NLS power supply 85400, these units are not only extremely reliable, but also very efficient due to their integrated backup power supply. At the same time, they do not require much space in the cabinet. Features: MTBF is about 1,000,000 hours Integration...
	Murr/Murr EMC Suppressor Module 26724 Maximum power 200W Introduction: Moore/Murr EMC Suppressor Module 26724 Features: 400 V AC/DC VDR For other configurations and voltages, please enquire. Product parameters Input voltage: 230... 420 V AC/DC Material: Flame retardant plastic Basis ...
	Moore/Murr Xentera 5TX Unmanaged Switch 58900 8~28VAC Summary: Unmanaged switches are ideal for any network where configuration or diagnostic capabilities are not critical. They are quick and easy to install and offer a variety of styles. Power is supplied to the IP67 switch via the output port of the fieldbus module. ...
	Murr/Murr EMC Suppressor Module 23102 Dimensions 92×61×25mm Introduction: Moore/Murr EMC Suppressor Module 23102 Features: 3× 575 V AC VDR For DIN-rail mounting, 2×Art.-No. 20900 Fits feet Suppressors for other voltages, frequencies, motor power need to be customized ...