The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a maximum continuous current of up to 10 A, 1 PDT, and an input voltage of 24 V DC
advantage
Efficient system connectivity via V8 adapter
All common input voltages from 12 V DC to 230 V AC
Due to the use of a 16 A relay, the electrical service life is long
Secure isolation between coil and contact in accordance with DIN EN 50178
The maximum continuous current is 10 A
Functional plug-in bridges
Coil side
Rated input voltage UN 24 V DC
Input voltage range 20.2 V DC ... 33.6 V DC （20 °C）
Typical input current at UN is 18 mA
Typical response time is 8 ms
Typical release time is 10 ms
Protection circuits polarity protection; Polarity protection diodes
spare diodes; Freewheeling diodes
The operating voltage is displayed with a yellow LED
handoff
Contact Type: 1 changeover contact
Switch contact type Single contact
Drive and function monostability
Drive (Polarity) Bipolar
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Limit continuous current to 10 A
6 A (This value applies only to terminal 12.) If terminal 12 is shorted, the rating of the relay is used. ）
Maximum start-up current 30 A (300 ms)
Minimum switching current 10 mA (12V)
Maximum power rating (resistive load) 240 W (24 V DC)
58 W (can be used for 48 V DC)
48 W (for 60 V DC)
50 W (can be used for 110 V DC)
80 W (can be used for 220 V DC)
2500 VA (can be used for 250VAC)
Bridge power rating (resistive load) 144 W (24 V DC This value applies only to terminal 12. If terminal 12 is shorted, the rating of the relay is used. ）
1500 VA (250 V AC This value applies only to terminal 12. If terminal 12 is shorted, the rating of the relay is used. ）
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.2 A at 250 V, 13 DCs
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
Connection: Push-in connection
Stripping length 10 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module PLC-RPT- 24DC/21HC - 2900291 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Relay module with manually operated locking - PLC-RPT- 48DC/21HC/MS - 2910532
PLC-INTERFACE, INCL. RELAY BASE AND PLUGGABLE POWER CONTACT RELAY (WITH MANUAL OPERATION, INTEGRATED STATUS LED AND FREEWHEELING DIODE), IN-LINE CONNECTION, 1 CO CONTACT, INPUT VOLTAGE: 48 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Relay module with manually operated locking - PLC-RSC-230UC/21-21AU/MS - 2910513
PLC-INTERFACE, including relay base and pluggable multilayer gold contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP-220DC/2X21 - 2903665
Plug-in industrial relay with power contacts, 2 PDTs, test button, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 220 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
DEK-REL- 5/I/1 - 2941183 relay modules from Phoenix
Relay module with solid state miniature relay, contacts (AgNi+Au): Small to medium loads, 1 NO contact, input voltage 5 V AC/DC, can be mounted on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Save up to 73 % on ...
|
|
RIF-2-RSC-LV-24AC/2X21 relay module from Phoenix/Phoenix - 2903323
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 1.58 W
Test voltage ...
|
|
Phoenix/Phoenix relay module EMG 45-REL/IR-W230/HWR - 2952185
Relay module with solid state industrial relay, contacts: 2PDT, multi-fault alarm input, input diode P-pole interconnection (6 x 1N4007 diodes), coil and capacitor in parallel, with multi-input indicator, input voltage 230V AC
Maximum power consumption under rated conditions is 3.68 W
Test Electricity ...
|
|
Phoenix/Phoenix relay modules EMG 17-REL/KSR-W230/21-21-LC - 2940430
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 2PDT, input voltage 230 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/21AU - 2966265
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTI-LAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 1 PDT, input voltage 24 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
RIF-2-RPT-LV-230AC/2X21 relay module from Phoenix/Phoenix - 2903310
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input voltage range ...
|
|
Phoenix/Phoenix relay module RIF-1-RSC-LDP-12DC/1IC -1078803
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 NO contact, max. inrush current peak up to 130 A, 80 A (20 ms), output voltage 12 ...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-230/21-LC - 296438
Relay module with solid state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 230 V AC/DC
The maximum power consumption under the rated condition is 1.15 W
Test voltage (coil/contact) 4 kV AC (50 Hz, 1 minute, coil/contact) ...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/ 1IC/ACT -1078800
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BSC.../1 IC/ACT base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with an inrush current of up to 130 A, 1 NO contact, input voltage 12 V DC
...
|
|
Relay module with manually operated locking - PLC-RSC- 48DC/21HC/MS - 2910516
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 1 changeover contact, input voltage: 48 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
Phoenix/Phoenix Single Relay REL-MR- 60DC/21AU - 2961134
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 60 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Forehead...
|
|
RIF-2-RSC-LDP-125DC/2X21 relay module from Phoenix/Phoenix - 2903324
Prefabricated relay modules with screw connections, including: relay bases, high-power contact relays and brackets. Contact type: 2 changeover contacts. Input voltage: 125 V DC
The maximum power consumption under rated conditions is 0.94 W
Test voltage (coil/contact) 2.5 kVrms ...
|
|
Phoenix/Phoenix relay modules PLC-RPT-230AC/21HC/SO46/HI-1079404
The PLC-INTERFACE consists of PLC-BSC.../21HC/SO46/HI base terminals with plug-in interface and pluggable miniature relays for high continuous currents, 1 changeover contact, rated input voltage 230 V AC, defined activation and deactivation thresholds
The most ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21 - 2966207
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 1PDT, input voltage 230V AC/220V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-G 24/ 2-LC - 294211
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 NC contact, input voltage 24 V DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix relay module EMG 22-REL/KSR- 24/21AU -2947721
Relay module with solid-state miniature electromagnetic relay, contacts (AgNi+Au): small to large loads, 1PDT, input voltage 24VAC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21/MS - 2909667
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with plug-in miniature relay with power contacts and manual operation, 1 changeover contact, 24 V DC input voltage
advantage
Low-profile design
Effective system connectivity via V8 adapter
|
|
Contact
working hours
