PLC-INTERFACE, INCL. RELAY BASE AND PLUGGABLE POWER CONTACT RELAY (WITH MANUAL OPERATION, INTEGRATED STATUS LED AND FREEWHEELING DIODE), IN-LINE CONNECTION, 1 CO CONTACT, INPUT VOLTAGE: 48 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 60 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 48 V DC
Typical input current at UN is 19 mA
Typical response time is 6 ms
Typical release time is 10 ms
Coil voltage 24 V DC
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 1 changeover contact
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA at 12 V
Maximum start-up current 24 A (20 ms)
Limit continuous current to 10 A
Maximum power rating (resistive load) 264 W (24 V DC)
62 W （48 V DC）
48 W （60 V DC）
52 W （110 V DC）
66 W （220 V DC）
2750 VA （250 V AC）
Switching capacity 1 A (24 V, DC13)
1.5 A （230 V, AC15）
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation: Safety isolation, reinforced insulation
Pollution class 2
Overvoltage category III
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RPT- 48DC/21HC/MS - 2910532 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternity by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-24AC/2X21 2903313
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 1.58 W
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix Time Relays Timing Relay - MACX-TR-2T-MUL - 1103345
Phoenix/Phoenix Time Relays Timing Relay - MACX-TR-2T-MUL - 1103345 Multifunction Time Relay, 24 V AC/DC ... Ample power supply of 240 V AC/DC, 14 functions, configurable time range (10 ms...) 999 h:59 min), providing ...
|
|
Phoenix/Phoenix relay PLC-RSC-230UC/21AU/MS - 2909660
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 230 V AC/220 V DC input voltage
The maximum power consumption under rated conditions is 0.74 W
...
|
|
Phoenix/Phoenix relay module RIF-4-RPT-LV-120AC/3X21 - 2903277
Prefabricated relay modules with Push-in connection, including: relay base, power contact relay, plug-in display/interference suppression module, and fixed bracket. Contact switching type: 3 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under the rated condition is 2.88 W
Measure...
|
|
Phoenix/Phoenix single relay REL-PR-BL- 24DC/4X21 1157980
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 24 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Coil side
Rated input voltage UN 24 V DC
...
|
|
REL-PR3- 24DC/3X1 - 2903706 single relay from Phoenix
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 24 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3
Insulation foundation ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21-21/SO46 - 1125985
PLC-INTERFACE that resists current/voltage interference on the control side. Includes PLC-BSC-120UC/21-21/SO46 base terminals with screw connection, plug-in miniature relay with power contacts up to 2x 8 A, 2 changeover contacts, 120 V AC input voltage
Test Electricity ...
|
|
Relay module with manually operated locking - PLC-RSC-230UC/21-21AU/MS - 2910513
PLC-INTERFACE, including relay base and pluggable multilayer gold contact relay with manual operation and integrated status LED, screw connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix relay modules DEK-REL- 24/1/AKT- 2964063
Relay module for actuators with solid state miniature relays, contacts (AgNi+Au): small to medium loads, 1 normally open contact, input voltage 24V AC/DC, mountable on NS 35/7.5, module thickness 6.2mm
advantage
Reduced costs due to the elimination of N-terminals
Most...
|
|
Phoenix/Phoenix Single Relay REL-FO/L-120AC/1X21 - 1308310
Plug-in miniature relay, FASTON connection, 1 changeover contact, status display: LED yellow, input voltage: 120 V AC
Test voltage 5 kVrms (50 Hz, 1 minute, coil/contact)
Test voltage 1 kVrms (50 Hz, 1 min, open contact)
Rated insulation ...
|
|
Phoenix/Phoenix relay module with manually operated locking - RIF-1-RSC-LV-230AC/2X21MS - 2905662
Prefabricated relay modules with screw connections, including relay bases, relay brackets, plug-in interference suppression modules, and power contact relays with test buttons and integrated status LEDs. Contact type: 2 changeover contacts. Input voltage: 230 V AC
RIFLINE END ...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21/SO46 - 1136244
The use of a PLC-INTERFACE prevents interference currents or voltages on the control side. Includes base terminal with plug-in connection, with "hot" plug-in miniature relay with up to 2x 8 A power contacts, 2 changeover contacts, 120 V AC input voltage
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix relay module PLC-RSC-125DC/21 - 2980021
The PLC-INTERFACE, consisting of the base terminal block PLC-BSC.../21- with screw connection and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1PDT, input voltage 125 V DC
The maximum power consumption under rated conditions is 0.38 W
Test Electricity ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1AU/MS/SEN - 2909678
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 normally open contact, 24 V DC input voltage
The maximum power consumption under the rated condition is 0.22 W
Test Electricity ...
|
|
Phoenix/Phoenix relay modules PLC-RPT-230AC/21HC/SO46/HI-1079404
The PLC-INTERFACE consists of PLC-BSC.../21HC/SO46/HI base terminals with plug-in interface and pluggable miniature relays for high continuous currents, 1 changeover contact, rated input voltage 230 V AC, defined activation and deactivation thresholds
The most ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21 - 2900305
The PLC-INTERFACE, consisting of PLC-BPT.../21 base terminals with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 230 V AC/220 V DC
advantage
Low-profile design
Adaptation via V8 ...
|
|
Relay module with manually operated locking - PLC-RSC- 24UC/21/MS - 2909650
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, PLUG-IN MINIATURE RELAY WITH POWER CONTACTS AND MANUAL OPERATION, 1 CO CONTACT, 24 V AC/DC input voltage
Advantage: Low-profile design
Precautions
Comment Type ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 24DC/21-21AU/MS - 2987985
Pluggable miniature relay, multilayer contacts with hard gold coating, 2 PDTs, test keys, mechanical switch position display, status LED, freewheeling diode, polarity A1+, A2-, input voltage 24 V DC
advantage
The strap can detect manual operation
DC model with freewheeling diode
Integrated ...
|
|
Phoenix/Phoenix Relays PLC-RPT-110UC/21HC/RW - 2900326
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals, plug-in connection with plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 110 V DC
Excellent...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21AU - 2900307
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal block with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V AC/DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Contact
working hours
