Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 48 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 48 V DC
Typical input current at UN is 22 mA
Typical response time is 13 ms
Typical release time is 14 ms
Protection circuit: Damping diode
The status display LED is yellow
Power consumption under rated conditions is 1.06 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connect your data
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/LDP- 48DC/4X21AU - 2903671 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-SL-1T-DTF - 2866161
Phoenix/Phoenix Time Relays Timing Relay - ETD-SL-1T-DTF - 2866161 multifunctional timing relay with 8 functions and an adjustable time range (50 ms - 100 h), wide area power supply, 2 PDT
Product Description:
All areas have a strong interest in safety and system ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-230AC/21-21/MS - 2987972
Pluggable miniature relay with power contacts, 2 PDTs, test key, mechanical switch position display, status LED, coil voltage 230VAC
advantage
The strap can detect manual operation
DC model with freewheeling diode
Integrated status LEDs
The maximum switching current is 16A
Mechanical switch position ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21-21 - 2900332
The PLC-INTERFACE, consisting of the Push-in base terminal blocks PLC-BPT.../21-21-21 and plug-in miniature relays with power contacts, can be mounted on DIN rails NS 35/7.5, 2 PDTs, input voltage 24 V AC/DC
advantage
Low-profile design
Effective ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 60DC/21 - 2900303
The PLC-INTERFACE, consisting of PLC-BPT.../21 base terminals with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 60 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix relay module PLC-RSC-125DC/21AU - 2980034
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTI-LAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 1 PDT, input voltage 125 V DC
The maximum power consumption under rated conditions is 0.38 W
Test Electricity ...
|
|
Phoenix Single Relay REL-MR-BL-110DC/21HC - 1109539
Pluggable miniature power relay, basic design, with power contacts, for high continuous currents, 1 changeover contact, input voltage 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation characteristics
Overvoltage Category ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/ 2AU/SEN-2966443
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminal with screw connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 NC contact, input voltage 230 V AC/220 V DC
Rated ...
|
|
DEK-REL- 5/I/1 - 2941183 relay modules from Phoenix
Relay module with solid state miniature relay, contacts (AgNi+Au): Small to medium loads, 1 NO contact, input voltage 5 V AC/DC, can be mounted on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Save up to 73 % on ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21-21/EX - 2909516
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in connection and plug-in relay with power contact, 2 changeover contacts, 230 V AC/220 V DC input voltage. It has been approved according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21-21/MS - 2910505
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), screw connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
RIF-3-RSC-LV-120AC/3X21 - 2903299
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 3 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under rated conditions is 2.8 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/ 1AU/MS/SEN-2909664
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminals, screw connection, plug-in miniature relays with multi-layer gold-plated contacts and manual operation, 1 normally open contact, 120 V AC/110 V DC input voltage
Rated ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/21-21AU - 2967125
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTILAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 2 PDTs, input voltage 24 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/100AC/4X21 - 2907055
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP-220DC/2X21 - 2903665
Plug-in industrial relay with power contacts, 2 PDTs, test button, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 220 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/200AC/2X21 - 2907053
Plug-in industrial relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 200 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Phoenix/Phoenix relay modules EMG 17-REL/KSR-120/21-21-LC -2940427
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 2PDT, input voltage 120 V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 60DC/21/MS - 2909643
Pluggable miniature power relay with power contact, 1 changeover contact, manual operation, 60 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage/transportation)
|
|
RIF-1-RPT-LDP-24DC/1ICT - 1078686
Prefabricated relay modules with plug-in interfaces, including: relay bases, power contact relays, plug-in display/interference suppression modules, and brackets. Contact type: 1 NO contact with a maximum inrush current peak of 800 A and a 24 V DC input voltage
Rated ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-110DC/4X21 - 1157976
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Winding/contact 2 kVrms ...
|
|
Contact
working hours
