The Fluke 709H mA Loop Calibrator saves measurement time while producing high-quality results. The 709H has HART communication and supports a select set of HART general and common application instructions. This is what sets the 709H apart, as it is both an economical, compact loop calibrator and a powerful HART communication tool.
The Fluke 709H calibrator is designed with a user-friendly interface and a Quick-Set rotary encoder knob. The tool reduces the measurement or output time of voltage and current and the power-up time of the loop. The protective holster is perfect for technicians, and the large, backlit display is easy to read, even in dark, cramped work areas. Features of the 709H calibrator:
0.01% readability
The design is small and durable, and it runs on 6 standard AAA batteries
Intuitive user interface, Quick-Set knobs for quick setup and ease of use
Built-in 250 Ω selectable resistor for HART communication
24 V DC loop power supply with mA measurement mode (-25% - 125%)
The current range resolution is 1 μA and the voltage range resolution is 1 mV
All measurements are made with a simple two-wire connection
Automatic power off to extend battery life (power off time can be adjusted up to 30 minutes)
Variable step and ramp times (seconds)
Adjustable span options (0 – 20 mA or 4 – 20 mA)
Tube test (using % key to simulate a defined mA value)
HART-specific features include:
Fast transfer of calibration data. The 709H/Track software/cable can be used in (. csv) or (csv). txt) format to record the parameters of all HART transmitters on your device.
Data can be recorded on a specific transmitter for easy troubleshooting. The data logging tool has selectable acquisition intervals of 1 to 60 seconds and can record 9800 records or 99 individual sessions. Each data sample contains 709H measurements, all four process variables, and standard state conditions.
In communication mode, users are able to read basic device information, perform diagnostic tests, and fine-tune the calibration of most HART transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop with a HART modem. The Fluke 709H enables virtually any technician to repair and support a HART unit.
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
This article introduces the Fluke 709H precision loop calibrator with HART communication/diagnostics function, if you are interested in Fluke/Fluke products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Fluke/Fluke IRC-120 thermal imaging camera
Amprobe IRC-120 Thermal Imaging Camera, Designed for Experts! With point-to-shoot capabilities, it provides you with a visual heatmap image to quickly and accurately identify temperature-related issues. Diagnosing and troubleshooting electrical connections, motors, HVAC, and electrical faults, as well as insulation leaks around the building...
|
|
Fluke insulated needle-nose pliers
The wires need to be cut. The cable needs to be stretched. The ejector rod needs to be twisted. Sometimes, it just needs to be fixed. With Fluke insulated pliers vs. cutting pliers, you'll have a variety of options when toothed jaws are needed for the job.
Fluke insulated needle-nose pliers include side edges and a unique milled waveform (as a vigorous clamp ...
|
|
Fluke/Fluke 1587C FC Insulated Multimeter
The Fluke 1587C FC Insulated Multimeter combines a digital insulation tester with a full-featured, true-rms digital multimeter in a single, compact, handheld product for maximum versatility in troubleshooting and preventative maintenance.
Fluke 1587C FC ...
|
|
Fluke PTi120 Portable Pocket Thermal Camera weighs 0.233kg
Summary: The Fluke PTi120 Portable Pocket Thermal Imaging Camera is a compact thermal imaging camera that can be carried with you every day. Close and ready to use. Resistant to the ingress of dust and moisture. Withstands a drop of 1 meter. Now, the Enhanced IR Inspector can easily ...
|
|
FLUKE MS-POE CABLE TESTER
MS-POE Cable Tester Network Verification Tester POE Tester
Quickly identify faults
Quickly determine if the problem is caused by poor or unconnected cables, insufficient power, or a powered device (PD).
Switch port speeds can reach up to 10 Gigabit
Determination of open and short circuit positions
...
|
|
Fluke 107 fully automated, high-precision handheld digital multimeter
The Fluke 107 Digital Multimeter is Fluke's new handheld multimeter and is designed to be the same size as the palm size, but this series of multimeters has the best safety in its class and is designed to meet the needs of your work! All factors considered, the 107's multimeter is completely beyond you ...
|
|
Fluke/Fluke TiS75 thermal imaging camera
With 320x240 resolution and manual focus, the TiS75 delivers professional-quality images for easy viewing and problem-solving.
Features:
• Professional image quality with a resolution of 320x240
• Flexibility with manual focus to move from 0.15 meters (6 inches ...
|
|
FLUKE TL220 TEST LEAD
The TL220 SureGrip Industrial Test™ Lead Set is designed for reliable grip in smooth hands. Interchangeable test lead sets are available for a variety of electrical applications. Compatible with all instruments and test probes that support a standard 4mm sheathed banana plug.
The surregrip design allows ...
|
|
Fluke/Fluke 771 mA Process Clamp Meter
Perform 4-20 mA signal measurements without disconnecting the loop and save time.
Features of the 771 mA Clamp Meter:
0.2% accuracy
0.01 mA resolution and sensitivity
There is no need to "disconnect the loop" to measure a 4 to 20 mA signal
Measurement PLC and control system analog I/O ...
|
|
Fluke/FLUKE TiX660 thermal imaging camera
With the highest-performance thermal imaging camera range, there's no need to doubt the results of your inspections and analyses.
Resolution:
640 x 480
Measured infrared pixels:
307,200 (1,228,800 pixels, with precision displacement imaging enabled)
Features:
Keep a safe distance to ...
|
|
Fluke Rotatable Pen FTL175
The Patented TwistGuardTm extendable probe housing meets electrical safety requirements and reduces probe exposure while providing the versatile functionality needed for a wide range of measurements. WearGuardTm wire wear indication. Each test wire is covered with two layers of silicone insulation; The test line has notched, ...
|
|
Fluke/Fluke 930 Tachometer HVAC Equipment Maintenance Tool
The Fluke-930 tachometer is a low-profile version of the F931 tachometer, which is different from the contact and non-contact dual-purpose function of the F931, and is only equipped with a non-contact tachometer detection function
The 6-digit backlit display reads data clearly
Signal detection reminder to avoid invalid detection actions
Maximum and minimum average value lock judgment ...
|
|
Fluke/Fluke 1AC-II Series VoltAlert™ Contactless Voltage Testers
Pocket-sized voltage detector
Fluke's next-generation VoltAlert™ AC non-contact voltage tester is compact and easy to use—just place the probe on the power strip, outlet, or power cord. When the probe glows red and the detector beeps, the presence of ...
|
|
Fluke/Fluke 1630 Ground Loop Resistance Test Clamp Meter
It is used to measure ground loop resistance in commercial, industrial, and engineering applications
The Fluke 1630 uses clamp ground resistance testing technology that greatly simplifies the ground loop testing process and allows for non-intrusive leakage current measurements. The Fluke 1630 is small, durable, and very adaptable.
|
|
FLUKE 961A/961B/961C USB TYPE TEMPERATURE AND HUMIDITY RECORDER
Record at any time, read at any time, and use it conveniently
There is no need for a separate data cable, you can directly use the built-in USB interface of the Fluke 961 to easily read the automatically generated temperature and humidity monitoring PDF file, and you can also quickly read the temperature and humidity data in the recorder in the form of tables, charts, and texts.
|
|
Fluke TB25 5.2 Gallon Cartridge Tool Organizer Bag
The Fluke TB25 Cartridge Tool Organizer is designed to safely carry and protect most of the Fluke test tools and accessories needed during any job. Combining the convenience of a toolkit with the construction and rigidity of a toolbox, the TB25 brings you a versatile organizer that can be used ...
|
|
The Fluke/Fluke TiS60+ camera measures temperatures up to 400 °C
Summary: The Fluke/Fluke TiS60+ camera has a 320 x 240 resolution, and thermal images captured with the TiS60+ can capture more subtle temperature differences from a greater distance. The TiS60+ has a fixed focal length, which ensures high-quality images are captured from greater distances. TiS60 ...
|
|
Fluke/Fluke 707 Loop Calibrator
The ultra-fast handheld tool for loop calibration, the Fluke 707 Loop Calibrator (Loop Calibrator), is a high-performance solution for calibration, repair, and maintenance of current circuits. Its new Quick Click knob is fast and easy to use. Loop calibrator (loop ...
|
|
Fluke/Fluke T6-1000 Non-Contact Voltage and Current Tester
The Fluke T6 features innovative FieldSense technology that allows you to measure AC voltage and current simultaneously through the jaws without the need for a pen to contact the contacts*! (T6-600 needs to be switched to display current/voltage reading)
It is especially suitable for the daily rapid inspection of property staff such as residential, CBD, and supermarket. Day...
|
|
Fluke/Fluke 712 Platinum Resistance (RTD) Process Calibrator
The Fluke 710 series temperature calibrators offer superior performance, durability, and reliability. They are compact, lightweight, and easy to carry. The Fluke 710 calibrator is easy to use thanks to its push-button interface. Each calibrator is resistant to electromagnetic interference, dust and splash, and the removable battery cover makes it easy to get rid of the wheel.
|
|
Contact
working hours
