|
IDEC/Izumi HE2B Enabling Switch HE2B-M220PN1
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|
IDEC/Izumi HS5E-KVA0L03-2C502 Safety switch with key lock
VA circuit, key removal at LOCK position, key 502, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
We start with ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7012
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS5E-KVD003-2B501 Safety switch with key lock
VD circuit, key removal at unlock position, key 501, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the unlocked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric approach ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-VA7Y4M-G Interlock 4 CNT Solenoid Lock
4 Contacts, 1NC 1NO Gate, 1NC 1NO Lock Monitoring Circuit, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
G ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2B
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M222PY
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1(2005) ...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L20MCB-1N
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
(IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),
|
|
IDEC/Izumi Safety Switch HS1B-024R-G
64x40x125 mm housing, direct opening action: If the doors are forcibly opened, the contacts will be disconnected even if they are welded or stuck, with or without indicator (red or green), available in 2 contact configurations (1NO/1NC or 2NC ), in accordance with ISO14119 ...
|
|
IDEC/Izumi HS5E-KVD005-2C502 Safety switch with key lock
VD circuit, unplug the key in the LOCK position, key 502,5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2A501
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HS7A-DMC non-contact safety switch HS7A-DMC79010
Small size (external dimensions: 7mm× 16mm×51mm).
Simple alignment during installation.
Up to 36 sets can be connected. (When using a safety relay module: HR1S-DME type).
IP67 protection structure.
Mechanical Specifications:
Contact structure 2NO
Functional Specifications:
The detection distance is 10m
...
|
|
IDEC/Izumi Safety Interlock HS5L-VB44M-G Interlock 4 CNT Spring Lock
4 Contacts, 1NC 1NO Gate, 2NC Lock Monitoring Circuit, Spring Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET ...
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-R44KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2C
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5005
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi HS5D Safety Switch HS5D-02RNP
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSR-R-T004
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS5E-KVA0L03-2C501 Safety switch with keylock
VA circuit, key removal at LOCK position, key 501, 3m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
We start with ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-11B05 Safety Interlock Switch 1NC1NO
IDEC/Izumi HS6B Subminiature HS6B-11B05 Safety Interlock Switch 1NC1NO 1NC 1NO Contact, 3m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Open directly ...
|