PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), Push-in connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 50 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 230 V AC
220 V DC
Typical input current at UN is 5 mA
Typical response time 6 ms (220 V DC)
3 ms … 15 ms （230 V AC）
Typical release time 10 ms (220 V DC)
Typical release time range 3 ms ... 15 ms （230 V AC）
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA (12V)
Maximum start-up current 12 A (20 ms)
Limit continuous current to 6 A
Maximum power rating (resistive load) 192 W (24 V DC)
62 W （48 V DC）
42 W （60 V DC）
55 W （110 V DC）
66 W （220 V DC）
2000 VA （250 V AC）
Switching capacity 1 A (24 V, DC13)
1.5 A （230 V, AC15）
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
2.5 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation: Safety isolation, reinforced insulation
Pollution class 2
Overvoltage category III
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the relay module with manual operation locking function of the Germany brand Phoenix/Phoenix - PLC-RPT-230UC/21-21/MS - 2910523 products, the purpose of 76 Technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Relay module with manually operated locking - PLC-RPT- 24DC/ 1/MS/ACT - 2909677
The PLC-INTERFACE is suitable for output functions, including the PLC-BPT.../ACT base terminal with plug-in connection, plug-in miniature relay with power contacts and manual operation, 1 NO contact, 24 V DC input voltage
advantage
Directly connected to the relay module's ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/ 1AU/SEN - 2966333
The PLC-INTERFACE is suitable for input functions, including the PLC-BSC.../SEN base terminal with screw connection with plug-in miniature multilayer gold-plated contact relay for mounting on the DIN rail NS 35/7.5, 1 NO contact, input voltage 230 V AC/220 V DC
advantage
...
|
|
Phoenix/Phoenix Relays PLC-RPT-110UC/21HC/RW - 2900326
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals, plug-in connection with plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 110 V DC
Excellent...
|
|
RIF-2-RSC-LV-120AC/2X21 - 2903322
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under rated conditions is 1.56 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 60DC/21-21AU - 2900341
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal block with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 60 V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
REL-MR- 24AC/21-21 - 2961435 single relay
Plug-in miniature power relay with power contacts, 2 PDTs, input voltage 24 V AC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation ...
|
|
Phoenix/Phoenix relay module RIF-1-RSC-LDP-12DC/1IC -1078803
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 NO contact, max. inrush current peak up to 130 A, 80 A (20 ms), output voltage 12 ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/21HC - 2967620
PLC-INTERFACE FOR HIGH CONTINUOUS CURRENT, INCL. PLC-BSC.../21 HC BASE TERMINAL WITH SCREW CONNECTION AND "HOT" MATING MINIATURE RELAY FOR MOUNTING ON NS 35/7,5 DIN RAIL, LIMIT CONTINUOUS CURRENT UP TO 10 A, 1 CO CONTACT, INPUT VOLTAGE 24 V DC
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/LDP- 48DC/2X21 - 2903661
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 48 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 12DC/4X21 - 2903676
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 12 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
RIF-1-RSC-LV-120AC/2X21AU - 2903344
Prefabricated relay modules with screw connections, including: relay bases, multi-layer contact relays, pluggable display/interference mitigation modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 120 V AC
Maximum power consumption under rated conditions is 0.96 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RSC-24DC/21HC/EX - 2909519
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
...
|
|
Relay module with manually operated locking - PLC-RSC- 24DC/21HC/MS - 2910514
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 1 changeover contact, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
Phoenix/Phoenix relay module PLC-RSC- 48DC/21-21 - 2967248
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 48 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-BL-1T-230-PT - 2905814
Compact multi-function time relay with 4 functions, adjustable time range (50 ms - 1 h), Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-230AC/21HC/MS - 2987914
Pluggable miniature relay with power contact, 1 PDT, test key, mechanical switch position display, status LED, input voltage 230VAC
advantage
The strap can detect manual operation
Integrated status LEDs
DC model with freewheeling diode
The maximum switching current is 16A
Mechanical switch position ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21AU - 2961163
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Ruler...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/ 1AU/SEN - 2900315
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 230 V AC/220 V DC
advantage
...
|
|
Phoenix/Phoenix single relay REL-PR-BL- 24DC/4X21 1157980
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 24 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Coil side
Rated input voltage UN 24 V DC
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-BL-200AC/21-21/MS - 2908182
Plug-in miniature relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 200 V AC
size
Width 13 mm
Height 29 mm
Depth 25.5 mm
Environmental conditions
Ambient temperature (operating) -40 ...
|
|
Contact
working hours
