Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 125 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 125 V DC
Typical input current at UN is 7.7 mA
Typical response time is 13 ms
Typical release time is 14 ms
Protection circuit: Damping diode
The status display LED is yellow
Power consumption at rated conditions is 0.96 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connect your data
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/LDP-125DC/4X21AU - 2903674 products, the purpose of 76 Technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Time Relays Timing Relays - ETD-BL-2T-I-230 - 2907713
Compact pulse encoder with adjustable pulse and pause time (50 ms-100 h), wide-area power supply, Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and automatic ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1/ACT - 2900312
The PLC-INTERFACE is suitable for output functions, including PLC-BPT.../ACT base terminals with plug-in connection with plug-in miniature power contact relay for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V DC
advantage
Directly connected to the following ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-230VAC/4X21 - 1157966
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 230 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 switching cycles
Test voltage Coil/contact 2 kVrms (50 Hz ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21AU/MS - 2909673
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with manually operated plug-in miniature relay with multi-layer gold-plated contacts, 1 changeover contact, 24 V AC/DC input voltage
The maximum power consumption under rated conditions is 0.26 W
Test voltage ...
|
|
Phoenix/Phoenix Single Relays - REL-FO/LRC-230AC/1X21/MS - 1308323
"Hot" mating miniature relay with mechanical switching position indicator, FASTON connection, 1 changeover contact, status display: LED yellow, damping diode, RC element, input voltage: 230 V AC
Input voltage range 184 V AC ... 253 V AC
Trunk frequency ...
|
|
RIF-4-RPT-LV-230AC/3X21 - 2903276
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 3 PDT. Input voltage: 230 V AC
The maximum power consumption under rated conditions is 3.22 W
Test voltage coil/contact ...
|
|
Phoenix/Phoenix relay module PLC-RSC-125DC/21AU - 2980034
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, WITH PLUG-IN MINIATURE MULTI-LAYER GOLD-PLATED CONTACT RELAY FOR MOUNTING ON DIN RAIL NS 35/7.5, 1 PDT, input voltage 125 V DC
The maximum power consumption under rated conditions is 0.38 W
Test Electricity ...
|
|
Phoenix/Phoenix Time Relays Timing Relay - ETD-BL-2T-I-230-PT - 2907714
Compact pulse encoder with adjustable pulse and pause time (50 ms - 100 h), wide-area power supply, Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and self-propelled ...
|
|
Phoenix/Phoenix relay modules EMG 22-REL/KSR-G 24/TRN12 - 2952363
Relay module with miniature switching relay with integrated NPN transistor control, low control current, contact (AgNi): medium to large load, 1PDT, rated control voltage 12V DC
advantage
Low control current (module B), 0.5 mA depending on the model
Between the coil and the contacts ...
|
|
RIF-2-RPT-LDP-24DC/2X21 - 2903315
Pre-assembled relay modules with plug-in connections, including: relay base, high-power contact relay and bracket. Contact type: 2 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 30 V DC （2 ...
|
|
REL-MR- 24AC/21-21 - 2961435 single relay
Plug-in miniature power relay with power contacts, 2 PDTs, input voltage 24 V AC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1AU/MS/SEN - 2909678
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 normally open contact, 24 V DC input voltage
The maximum power consumption under the rated condition is 0.22 W
Test Electricity ...
|
|
Phoenix/Phoenix single relay with manually operated locking function - REL-OR3/L-120AC/3X21 - 2903695
Pluggable octal relay with power contacts, 3PDT, test button, mechanical switch position display, coil voltage 120V AC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 °C
Environment...
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-230/21-LC AU -2964393
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts for small loads, 1PDT, input voltage 230 V AC/DC
advantage
Integrated input module and interference suppression module
The maximum power consumption under the rated condition is 1.15 W
Test voltage (coil/contact) ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 48DC/21-21AU - 2967280
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 48 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix Single Relay REL-PR3-48DC/3X21 - 2908894
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 48 V DC
Coil side
Rated input voltage UN 48 V DC
Input voltage range 40.8 V DC ... 52.8 V DC (20 °C)
Typical input current at UN is 28 mA
UN's input power consumption ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - TR-ES-MUL-24/240-10H - 2907322
Multifunctional timing relay with 7 functions and an adjustable time range (50 ms - 10 h) for supply voltages 24 - 48 V DC/24 - 240 V AC, 1 PDT
size
Width 17.5 mm
Height 98 mm
Depth 57.9 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
REL-PR3-220DC/3X21 - 2909055
Plug-in high-power relay with power contacts, 3 switching contacts, coil voltage: 220 V DC
Coil side
Rated input voltage UN 220 V DC
Input voltage range 187 V DC ... 242 V DC (see graph)
Typical input current at UN is 6 mA
UN's loss ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21-21AU - 2967141
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 230 V AC/220 V DC
advantage
Low-profile design
Adaptation via V8 ...
|
|
Phoenix/Phoenix relay modules RIF-RPT-LDP-24DC/1X2/3X1/AU/FG - 1148703
Relay modules with plug-in connection, including: relay base and status LEDs, freewheeling diodes and clamps, safety relay with mechanically interlocking contacts (acc. to DIN EN 61810-3), contact type: 3 NO contacts and 1 NC, input voltage: 24 V DC ...
|
|
Contact
working hours
