Japan SMC_C85N16-25S Single-acting pneumatic fine cylindrical cylinder

Standardization of internal threads at the front end of the rod. The magnetic switch is more operable and the position adjustment is easier. ・Oscillating metal mounts for single earrings and trunnions have been added. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic switch ...

Standardization of internal threads at the front end of the rod. ・Magnetic switch operability is improved and position adjustment is easier. ・A model without trunnion mounting holes has been added to the basic model. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic ...

The piston is oval in shape and the width dimension can be reduced by up to 40% (compared to the CQ2 series). ・Lightweight: Up to 36% lighter (compared to the MU series). ・Magnetic switches can be installed in all four directions. ・The switch does not protrude from the main body. Mode of action: double action with single rod In the cylinder ...

Mass ** reduced by 15%. Easy air cushioning control. ・It can be installed from small magnetic switches to highly magnetic-resistant switches. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic switch (CDA2 series: CDA2, C...

CM2-XC4□ New has been added The durability in the dust environment is 6 times that of the standard product Corresponding to powder with particle size of 20-100μm Compatible with ceramic powder, toner, paper powder, and metal powder *Welding slag is excluded ・You can choose according to your application The piston rod part is equipped with a lubrication retainer (lubrication retention) ...

CD85N10-10-B Introduction: SMC C85 Series Double Acting Pneumatic Fine Cylindrical Cylinder CD85N10-10-B, 10mm stroke, 1 MPa max operating pressure, 10mm bore diameter Japan SMC_CD85N10-10-B photo show Model features introduced SMCC85 cylinder SMCC85 Cylinder Charm ...

CDG1BN40-200Z Introduction: SMC CDG1 Series Double Acting Pneumatic Fine Cylindrical Cylinder CDG1BN40-200Z, 200mm stroke, 1 MPa maximum operating pressure, 40mm bore diameter Japan SMC_CDG1BN40-200Z picture show Model features introduced CG1 cylinder SMCCG1 Series ...

A water-resistant cylinder with a shape that is easy to clean. ・Not only is the water resistance improved, but the service life is more than 5 times that of conventional cylinders (compared to our products). ・With magnetic switch (HYDB series: HYDB, HYDQB series: HYDQB, HYDC series: HYDC, HYDG series: HYDG) Type...

CG-T050(KIT) Introduction: SMC CG Series Trunnion Pin CG-T050, suitable for 50mm drilling Japan SMC_CG-T050(KIT) Model features introduced CG1 trunnion mounting Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that ...

A strong dust scraper ring is used at the scraper ring, which is suitable for use in environments with a lot of dust such as foundry equipment, construction machinery, and engineering vehicles. Customized content: With metal dust ring All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. We...

Shortened square cylinder with full length for magnetic switch mounting on 3 or 4 sides. A compact cylinder with a magnetic switch that does not protrude from the body. ・Mounting brackets for double earrings and compact foot mounts have been added. ・With magnetic switch (CDQS series: CDQS, CDQSW, CDQSK ...)

E5040 (KIT) Introduction: SMC E Series Beveled U-Clamp E5040, suitable for 40mm drilling Japan SMC_E5040 (KIT) photo display Model features introduced CP95/CP96 - Annex Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that all suppliers ...

JA10-4-070 Introduction: SMC JA Series Floating Fitting JA10-4-070, suitable for 10mm drilling Japan SMC_JA10-4-070 Photo show Model features introduced Floating joints Deviations between drive components and cylinders can be reduced, significantly reducing installation effort and time Type...

Neutralize the "eccentricity" or "insufficient parallelism accuracy" of the cylinder. So that the pivot does not need to coincide. Model: Stainless steel type Applicable bore(mm):10,15,16,20,25,32,40,50,63 All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods are ...

Compact cylinders CQS and CQ2 series have built-in guide rods. ・The non-rotation accuracy is ±0.2°C or less. ・Lateral load resistance of 2-4 times *Compared to the CQ series of low-profile cylinders. ・Loads can be mounted directly. ・The mounting dimensions are interchangeable with the CQS and CQ2 series. ・Belt ...

CDU10-15D Introduction: SMC CU Series 15mm Stroke Double Action Single Rod Pneumatic Multi Mounting Cylinder CDU10-15D, 10mm Bore, 0.7 MPa Max Operating Pressure Japan SMC_CDU10-15D picture display Model features introduced CU series cylinders The series CU Liberty Ann ...

・Standardization of four rail models. ・There is a wide variety of models, and you can choose according to the load quality and the required accuracy. Type: Plain bearing type How to operate: Cam follow-up guide rail type Bore bore (mm): 16,20,25,32,40,50,63 ...

The protective cover makes it dustproof and water resistant. Seals on the sides prevent foreign objects from entering from the sides. Model: Cam-follower guide type Mode of action: Double acting Bore bore (mm): 16,20,25,32,40,50,63 All suppliers of 76 Technology have been strictly vetted ...

CXSM25-50 Introduction: SMC Pneumatic Guide Cylinder CXSM Series CXSM25-50 Japan SMC_CXSM25-50 picture show Model features introduced SMCCXS twin rod cylinder amplitude SMC Twin Rod Cylinder with Plain Bearing (Type CXSM) or Ball Bearing Slide (Type CXSL) for ...

This space-saving cylinder with a shortened overall length is suitable for compact devices. ・Small magnetic switches can be installed on all 4 sides (2 sides from ø12 to ø25). ・The magnetic switch does not protrude. ・Lightweight: 5-13% reduction (compared to the conventional CQ2) ・Added double earrings for safety ...