Introduction: Airtac LSD series low-installation linear slide LSD15, the front combination of X-type (45° -45°) arc raceway groove design, so that it has the ability of self-alignment, even if there is a little error on the installation surface, it can also be maintained by the internal absorption well of the slider smooth and stable linear motion.
Features:
The 4-row ball is designed with a 45° contact angle with the raceway, which achieves an ideal two-point contact, can withstand positive and negative forces from the radial and lateral directions, and can also apply pre-pressure if necessary to increase the rigidity. The combined height of the slider and slide rail has been reduced, and the length of the slide has been shortened and miniaturized.
Due to the strict control of manufacturing accuracy, the dimensional accuracy can be maintained within a stable tolerance range, and the slider has a cage design to prevent the steel ball from falling, so the slider can be arbitrarily assembled on the same type of slide rail when assembling the interchangeable type line rail, and maintain its smoothness, preload and accuracy.
Hole Spacing (P)
Product parameters
Hole spacing (P): 60mm
Standard hole margin (S): 20mm
Minimum Custom Margin (S/Emin) Note]: 5(4)mm
Maximum Custom Margin (S/Emax) [Note]: 55 (56) mm
Maximum length of standard hole margin: 4000mm
Maximum length (Lmax): 4000mm
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
If you are interested in AIRTAC LSD series low installation linear slide LSD15, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
AirTAC solenoid valve 4V220-08 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC solenoid valve 4V220-08, the inner hole is processed by special technology, with low friction resistance, low starting air pressure and long service life
Features:
Pilot mode: internally guided or externally guided optional;
Strut type structure, good sealing, ...
|
|
AirTAC Pneumatic Valve 6TA0520 is made of aluminum
Introduction: AirTAC Pneumatic Valve 6TA0520, body aluminum alloy extrusion, inner hole processing with special technology, ** increase the flow rate, can be integrated with the base valve group, save installation space.
Features:
The body aluminum alloy is extruded, and the inner hole is added with a special process.
|
|
AirTAC 4V Series 2/5-Way Solenoid Valve 4V130E06BI
Introduction: AirTAC 4V Series 2/5-way Solenoid Valve 4V130E06BI
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve has three central functions.
|
|
AirTAC Check Valve NRV10 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Check Valve NRV10
Features:
Only allow the air flow to flow in one direction and not in the opposite direction;
It is used to prevent the counterflow phenomenon caused by the pressure drop of the air source and the increase of the pressure consumption caused by the increase of air consumption.
Effective circulation ...
|
|
AirTAC solenoid valve base 7V100M
Introduction: AirTAC solenoid valve base 7V100M
Features:
The same series of directional control valves can be integrated into the valve group, saving space and cost;
Unified intake, exhaust, unified wiring, easy to find when there is a fault;
Flexible combination, expandable ...
|
|
AirTAC solenoid valve 6V210 actuation frequency 5 seconds/time
Introduction: AIRTAC Solenoid valve 6V210, plug-in power connection mode, horizontal installation and vertical installation of terminals can be freely interchanged, internal row structure, can collect the pilot gas and discharge it from the R and S holes.
Features:
Plug-in power connection mode, horizontal terminal installation and ...
|
|
Airtac LSH Series Standard Linear Slide 20 Hole Spacing 60mm
Introduction: AIRTAC LSH series standard linear slide rail 20, front combination X-type (45° -45°) arc raceway groove design, so that it has the ability of automatic self-alignment, even if there is a little error on the installation surface, it can also be absorbed by the slider inside the well to maintain high-precision smooth and stable linear motion.
...
|
|
AirTAC 4V Series 2/5-Way Solenoid Valve 4V21006B Single Electronic Control
Introduction: AirTAC 4V Series 2/5-Way Solenoid Valve 4V21006B
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve has three central functions for ...
|
|
AirTAC Solenoid Valve 6V230 Working medium air
Introduction:AIRTAC Solenoid valve 6V230, plug-in power connection mode, horizontal installation and vertical installation of terminals can be freely interchanged, inner row structure, can collect the pilot gas and discharge it from the R and S holes.
Features:
Plug-in power connection mode, horizontal terminal installation and ...
|
|
AIRTAC/AirTAC 2S Series Direct Acting Normally Closed Fluid Control Valve 2-way 2-way
Introduction: AIRTAC 2S series direct-acting normally closed fluid control valve two-way two-position solenoid valve, rapid reversing and sensitive; The pressure range is wide, and there are ultra-high pressure type, high pressure type, standard type, large flow type, and extra-large flow type to choose from; The coil protection grade is IP65, and the power connection mode is ...
|
|
AirTAC Pressure Regulator SR200-08 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Pressure Regulator SR200-08
Features:
Independent pipeline pressure regulator, panel bracket installation is also available;
The structure is small and compact, easy to install and use;
The pressure regulation is stable and the pressure characteristics are good;
In addition to the standard form, there are also ...
|
|
AirTAC solenoid valve 6TV0120 is guaranteed to withstand pressure of 1.2MP
Introduction: AIRTAC solenoid valve 6TV0120, plug-in power connection mode, the terminal horizontal installation and vertical installation can be freely interchanged
Features:
Plug-in power connection mode, the horizontal installation and vertical installation of the terminal can be freely interchanged;
The inner exhaust structure can ...
|
|
AirTAC Solenoid Valve 4V320-08 Guaranteed pressure resistance of 1.2MPa
Introduction: AirTAC solenoid valve 4V320-08
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve is available with three central functions;
Pair...
|
|
Airtac LSH Series Standard Linear Slide 15 Standard Hole Margin 20mm
Introduction: AIRTAC LSH series standard linear slide rail 15, front combination X-type (45° -45°) arc raceway groove design, so that it has the ability of automatic self-alignment, even if there is a little error on the installation surface, it can be maintained by the internal absorption well of the slider smooth and stable linear motion.
...
|
|
AirTAC Pneumatic Valve 4A330C-10 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 4A330C-10
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-head two-position air control with memory function;
The inner bore adopts special ...
|
|
Airtac One-way throttle valve ASC100-06 Pipe diameter PT1/8
Introduction: Airtac one-way throttle valve ASC100-06
Features:
The structure is light and compact
The exhaust is throttled, the adjustment is sensitive, and the precision is high
Multi-position installation, easy to install and use
Product parameters
Working medium: air
Take over...
|
|
AirTAC Solenoid Valve 4V310-08 Guaranteed pressure resistance of 1.2MPa
Introduction:AirTAC solenoid valve 4V310-08, the inner hole is processed by special technology, the friction resistance is small, the starting air pressure is low, and the service life is long
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, anti-...
|
|
AirTAC Pneumatic Control Valve 6A210 Frequency 5 times/sec
Introduction:AirTAC Pneumatic Control Valve 6A210, body material aluminum alloy, body aluminum alloy extrusion molding, inner hole with special process processing, ** increase the flow rate, can be integrated with the base valve group, save installation space.
Features:
Body aluminum alloy extrusion, inner hole ...
|
|
AirTAC Solenoid Valve 4V330C-08 Guaranteed pressure resistance of 1.2MPa
Introduction: AirTAC solenoid valve 4V330C-08
Features:
Pilot mode: internally guided or externally guided optional;
Sliding column structure, good sealing, sensitive response;
The three-position solenoid valve is available with three central functions;
...
|
|
Airtac GPF Series Oil Mist Separator GPF20006 Automatic/Manual
Product introduction: small pressure loss, filtration efficiency up to 99% or more, large cup capacity; There are two types of structures to choose from: differential pressure manual integration and automatic drainage; The cup body is made of PC, nylon, and metal to choose from, which can meet the needs of different environments; The monocoque can optionally be installed with a fixed bracket ...
|
|
Contact
working hours
