Introduction: AIRTAC LSH series standard linear slide rail 20, front combination X-type (45° -45°) arc raceway groove design, so that it has the ability of automatic self-alignment, even if there is a little error on the installation surface, it can also be absorbed by the slider inside the well to maintain high-precision smooth and stable linear motion.
Features:
The 4-row ball is designed with a 45° contact angle with the raceway, which achieves an ideal two-point contact, can withstand positive and negative forces from the radial and lateral directions, and can also apply pre-pressure if necessary to increase the rigidity. The combined height of the slider and slide rail has been reduced, and the length of the slide has been shortened and miniaturized.
Due to the strict control of manufacturing accuracy, the dimensional accuracy can be maintained within a stable tolerance range, and the slider has a cage design to prevent the steel ball from falling, so the slider can be arbitrarily assembled on the same type of slide rail when assembling the interchangeable type line rail, and maintain its smoothness, preload and accuracy.
Product parameters
Hole spacing (P): 60mm
Standard hole margin (S): 20mm
**Small customer margin (S/Emin) Note]: 5mm
**Large Margin (S/Emax) [Note]: 54mm
Standard hole margin**Large length: 4000mm
**Large length (Lmax): 4000mm
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
If you are interested in AIRTAC LSH Series Standard Linear Slide 20, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
AirTAC Solenoid Valve 3V2M Tube Diameter PT1/8
Introduction: AIRTAC Solenoid valve 3V2M, coaxial truncated structure, good sealing, large flow rate; No need for lubrication
Features:
Direct-acting structure, sensitive reversing; Normally closed and normally open are available;
Coaxial cross-sectional structure, good sealing, large flow rate; ...
|
|
AirTAC Fluid Control Valve 2V0250-25 Maximum pressure resistance 1.5MPa
Introduction: AirTAC Fluid Control Valve 2V0250-25
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
The structure is light and compact;
Product parameters
Working medium: air, water, oil
Actuation ...
|
|
AirTAC Solenoid Valve 7V0530 Weight 50g
Introduction: AIRTAC Solenoid valve 7V0530, plug-in power connection mode, the horizontal installation and vertical installation of the terminal can be freely interchanged, the inner row structure, can collect the pilot gas and discharge it from the R and S holes
Features:
Plug-in power connection mode, horizontal installation of terminals and vertical installation ...
|
|
AirTAC Pneumatic Control Valve 3A120-06 Working temperature -20-70°C
Introduction: AirTAC Pneumatic Control Valve 3A120-06, the inner hole is processed by special technology, with low friction resistance, low starting air pressure and long service life
Features:
Sliding column structure, good sealing, sensitive response
The dual-head air control has a memory function
Hole...
|
|
AirTAC Pneumatic Valve 4A430C-15 is guaranteed to withstand pressure of 1.2MPa
Introduction: AirTAC Pneumatic Control Valve 4A430C-15
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-head two-position air control with memory function;
The inner bore adopts special ...
|
|
AirTAC Induction Check Valve PCV08F is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Induction Check Valve PCV08F
Features:
safety circuit for pressure holding;
The cylinder stops positioning instantaneously;
Special circuit design applications;
The new pilot port cannula type can effectively save safety space and improve safety efficiency ...
|
|
AirTAC Pressure Regulator BFC4000 Tube diameter PT1/2
Introduction: Airtac pressure regulator BFC4000
Features:
The structure is light and compact, easy to install and use;
Press-in barium mechanism can prevent the adjustment pressure from being disturbed by the outside world.
Low pressure loss and high water separation efficiency;
Removal ...
|
|
AirTAC Fluid Control Valve 2L320-32 Weight 2700g
Introduction: Airtac fluid control valve 2L320-32 has a wide range of pressures, and high-pressure type (H) and standard type are available
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
Wide range of operating pressures, high pressure type (H), standard ...
|
|
AirTAC Pressure Regulating Filter AFR1500 Pipe diameter PT1/8
Introduction: AirTAC pressure regulator AFR1500
Features:
The structure is light and compact, easy to install and use;
Press-in barium mechanism can prevent the adjustment pressure from being disturbed by the outside world.
Low pressure loss and high water separation efficiency;
Removal ...
|
|
AirTAC Fluid Control Valve 2LH050-15 cv value 0.55
Introduction: AIRTAC fluid control valve 2LH050-15, wide range of pressure, high pressure type (H), standard type are available
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
Wide range of pressure, high pressure type (H), standard ...
|
|
AirTAC Pneumatic Valve 4A130E-06 is guaranteed to withstand pressure of 1.5MPa
Introduction: AirTAC Pneumatic Control Valve 4A130E-06
Features:
Sliding column structure, good sealing, sensitive response;
The three-position pneumatic valve is available with three intermediate functions;
Double-headed two. Position air control has a memory function;
The inner bore adopts a special ...
|
|
AirTAC Pressure Regulator 40015 Pipe Diameter PT1/2
Introduction: AirTAC Regulator 40015
Features:
High precision of pressure regulation and sensitive response;
Good pressure characteristics and flow characteristics;
It is easy to install and can be installed independently with its own bracket
It can also be installed directly with existing modular filter combination elements GAF ...
|
|
AirTAC Regulator SDR100M5 Tube diameter M5
Introduction: AirTAC pressure regulator SDR100M5
Features:
Piston back pressure structure, simple and compact, cost-effective, easy to install and use;
The voltage regulation range is wide, and in addition to the standard type, there are also low-pressure types available.
The output pressure is stable, mainly used for ...
|
|
AirTAC 2P Series Fluid Control Valve 2P02508BIG
Introduction: AIRTAC 2P Series Fluid Control Valve 2P02508BIG
Features:
Direct-acting normally closed two-port two-position solenoid valve, rapid and sensitive reversing;
Compact structure, small size, light weight, easy to assemble and disassemble:
The body is made of nylon 66, and the magnet wire ...
|
|
AirTAC Fluid Control Valve 2KL250-25 cv value 12.5
Introduction:AirTAC Fluid Control Valve 2KL250-25 is compact in structure, small in size, light in weight, easy to assemble and disassemble
Features:
Piston pilot normally open two-port two-position solenoid valve, rapid reversing and large flow;
Compact structure, small size, light weight, assembly and disassembly ...
|
|
AirTAC GR Series Pressure Regulator GR600-20 Tube Diameter PT3/4
Introduction: AIRTAC GR Series Pressure Regulator GR600-20
Features:
Built-in square pressure gauge is used to save installation space (external round pressure gauge can also be used);
Press-in self-locking mechanism can prevent the setting pressure from being disturbed by the outside world.
|
|
AirTAC filter GPFR300-08 tube diameter PT1/4
Introduction: Airtac/AirTAC filter GPFR300-08
Features:
The use of snap-on round pressure gauge, not only to save installation space, the gauge glass has a magnifying function, the scale is clear and discerning;
Press-in barium device, which can prevent abnormal movement caused by external interference in setting pressure;
...
|
|
AirTAC solenoid valve 6v0510 weight 35g
Introduction:AIRTAC Solenoid Valve 6v0510 plug-in power connection mode, the horizontal installation and vertical installation of the terminal can be freely interchanged, and the inner row structure can collect the pilot gas and discharge it from the R and S holes.
Features:
Plug-in power connection mode, horizontal terminal installation and ...
|
|
AirTAC 3V100 Series 3-Way 2-position Solenoid Valve 3V11006NCB rated voltage DC24V
Introduction: AirTAC 3V100 Series Three-way Two-position Solenoid Valve 3V11006NCB
Features:
Pilot mode: internally guided or externally guided optional:
Junzhu structure, good sealing, sensitive response:
The double-ended solenoid valve has a memory function:
...
|
|
AIRTAC GAC Series Triple Piece GAC200-06 Weight 750g
Product introduction: The drip structure adopts the form of gap sealing, and the oil feeding adjustment is stable and reliable; The oil feed adjustment ring can only rotate for one week, and the oil feed size is basically distributed in a linear manner, and the oil feed amount can be roughly calculated according to the position of the scale ring; It can be refueled without stopping; The special drip nozzle structure makes the dripping oil outlet ...
|
|
Contact
working hours
