Introduction: Mitsubishi/Mitsubishi Six-Axis Robot RV-8CRL Slender Compact Arm, a new generation of industrial robots that balance practicality and design aesthetics.
Product Details
It can handle up to 8 kg
The body weighs 41 kg
Lightweight design
Maximize the work area
The maximum radius of action is 931mm. The non-offset design of the J2-axis joint minimizes the field of rotational interference, thus ensuring the maximum level of effective working area.
Easy to install in the device
The slender, compact form factor and small base of the robot, coupled with the structure that does not protrude outwards from the front, rear, left and right, reduce the interference of the robot when it moves, and make it easier to install in automation cells and equipment.
Built-in user wiring and piping
Signal cables and air piping for gripper control are built into the arm from the base position to the front of the robotic arm. The signal cable adopts a universal D-sub connector, which can be freely used according to the application.
User wiring is added
The upper arm and lower part of the arm are equipped with threaded holes for fixed cables, air pipes, solenoid valves and other devices.
Anywire ASLINK
If the wiring of the gripper is insufficient, Anywire ASLINK can be used by utilizing the built-in wiring.
This article introduces Mitsubishi Electric/Mitsubishi Six-Axis Robot RV-8CRL Arm Span 931mm products, if you are interested in Mitsubishi Electric Robot Six-axis Robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Mitsubishi Electric HG-SN202BJ-S100 2kW/31A
Introduction: Mitsubishi Electric HG-SN202BJ-S100 speed · position detector incremental 17-bit encoder (servo motor resolution per revolution: 131072pulses/rev), 0°C - 40 °C (no freezing) when operating at ambient temperature, -15°C - 70 °C (no freezing) when storing.
...
|
|
FR-CB205-ADP KIT Japan Mitsubishi/Mitsubishi Electric EMI filter and accessories
FR-CB205-ADP KIT Introduction: Mitsubishi Cable, Used with E700 Series EMI Filters The entire range of EMI filters can be used with the E740 Inverter Driver Series.
Mitsubishi/Mitsubishi Electric _FR-CB205-ADP KIT
Model features introduced
E700 Accessory EMI Filter Full ...
|
|
Mitsubishi AC Servo MELSERVO-JE 2.0kHz 0.5-3KW
Introduction: Mitsubishi AC servo MELSERVO-JE speed frequency response 2.0kHz, 0.5-3KW capacity, corresponding to the theme of the times - energy saving, with standard specifications corresponding to overseas specifications, easily meet the world's needs for drive control.
Product Details ...
|
|
Mitsubishi Electric HG-KNS13J 0.1KW 0.95 N·m
Introduction: Mitsubishi Electric HG-KNS13J speed · position detector absolute position, incremental 22-bit encoder (servo motor resolution per revolution: 4194304pulses/rev), full closed-loop self-cooling, protection grade IP65.
Product parameters
...
|
|
Q612B Japan Mitsubishi/Mitsubishi Electric PLC bracket and shell
Q612B Introduction: Mitsubishi MELSEC Q Series Docking Station, for use with MELSEC Q Series, 12 module slots, DIN rail mounting docking station is connected to the main docking station via an assembled bus cable. Slots are provided for power modules and additional input/output modules. If you insert ...
|
|
FX5-65EC Japan Mitsubishi/Mitsubishi Electric PLC Accessories
FX5-65EC Introduction: Mitsubishi FX5 Series Expansion Bus Cables for use with MELSEC iQ-F Series PLCMitsubishi FX5 Series Expansion Cables. If you want to extend the connection distance or replace the PLC in two rows, these extension cables can be equipped with the FX5 expansion module.
|
|
Mitsubishi Electric HG-KR43J is rated at 400W/2.6A
Introduction: Mitsubishi Electric HG-KR43J speed · position encoder absolute position · increment shared 22bit encoder (servo motor resolution per revolution: 4194304Pulses/rev), fully enclosed self-cooling (protection level: IP65).
Product References ...
|
|
FR-UDA01 Japan Mitsubishi/Mitsubishi Electric EMI filter and accessories
Introducing the FR-UDA01: Mitsubishi Mounting Kit, 136.7 x 68 x 15 mm, for use with the FR-S500 series filters are designed for use with D720S and D740 drive drivers to reduce RF interference. Mountable adapters that allow the D700 series drives to ...
|
|
GT21-WUCOV Japan Mitsubishi/Mitsubishi Electric Human Machine Interface (HMI) Accessory
GT21-WUCOV Introduction: Mitsubishi Protective Cover, for use with HMI GOT, GT21 Wide, GT25 Wide
Mitsubishi/Mitsubishi Electric _GT21-WUCOV
Model features introduced
Eco-friendly cover, USB port for the front of the GOT (spare)
Streamlined operation panel: because of the ...
|
|
FX0N-65EC Japan Mitsubishi/Mitsubishi Electric PLC Accessories
FX0N-65EC Introduction: Mitsubishi Cable, for use with FX Series Optional 650mm long cable for interconnection of base and extension units, allowing for a two-layer configuration. The following analog and temperature modules (combined analog input and output modules, analog input modules, analog output modules, ...
|
|
FR-A7NP Japan Mitsubishi/Mitsubishi Electric EMI filter and accessories
FR-A7NP Introduction: Mitsubishi Profibus Module, used in FR-A700 series, FR-F700 series
Mitsubishi/Mitsubishi Electric _FR-A7NP
Model features introduced
MitsubishiFR-A700
Model parameters are introduced
All suppliers of 76 Technology have undergone strict ...
|
|
Mitsubishi Coaxial Bus Module Q80BD-J71BR11 0.67A
Introduction: High-speed, high-precision machine control with multiple CPUs. By parallel processing of the straight line and high-speed communication between multiple CPUs (with a cycle time of 0.88 ms) of the sequential control program, the high-speed control of the high-speed communication cycle between multiple CPUs and the motion control are synchronized, thus maximizing the computing efficiency. This...
|
|
Mitsubishi Electric HG-SN102BJ-S100 has a rated current of 5.6A
Introduction: Mitsubishi Electric HG-SN102BJ-S100 speed · position detector incremental 17-bit encoder (servo motor resolution per revolution: 131072pulses/rev), 0°C - 40 °C (no freezing) when operating at ambient temperature, -15°C - 70 °C (no freezing) when storing.
...
|
|
Mitsubishi Electric HG-SN52J-S100 0.5KW 7.16 N·m
Introduction: HG-SN52J-S100 Mitsubishi Electric Speed · Position Detector Incremental 17-Bit Encoder (Servo Motor Resolution Per Revolution: 131072pulses/rev), Structure Full Closed-Loop Self-Cooling (Protection Grade: IP65 (Note 3)).
Product References ...
|
|
FR-A7AP Japan Mitsubishi/Mitsubishi Electric EMI filter and accessories
FR-A7AP Introduction: Mitsubishi encoder, 11 → 30 V, for use with the FR-A700 series
Mitsubishi/Mitsubishi Electric _FR-A7AP
Model features introduced
MitsubishiFR-A700
Model parameters are introduced
All suppliers of 76 Technology have been strictly audited to ensure that ...
|
|
FR-A5CBL 1 Japan Mitsubishi/Mitsubishi Electric EMI filter and accessories
FR-A5CBL 1 Introduction: Mitsubishi cable for use with FR-A700, FR-D700, FR-E700 and FR-F700 series
Mitsubishi/Mitsubishi Electric _FR-A5CBL 1
Model features introduced
MitsubishiFR-A700
Model parameters are introduced
76 Technology provides ...
|
|
GT10-C30R4-8P Japan Mitsubishi/Mitsubishi Electric Human Machine Interface (HMI) Accessory
GT10-C30R4-8P Introduction: Mitsubishi Cable, 3m Cable, A range of accessories for use with the PLC FX Series GOT Series HMI, including an RS-422 cable that can be used on the GT1020 or GT1030 Series HMI and FX Series (FX1S, FX1N, FX2N, FX2NC, F ...
|
|
QC12B Japan Mitsubishi/Mitsubishi Electric PLC accessory
QC12B Introduction: Mitsubishi Cables, for use in the QC series These prefabricated bus extension cables allow Q Series expansion bases (e.g. Q68B) to be separated from the main base by up to 3m distance. Compatible with all main and expansion bases of the Q Series
Mitsubishi/Mitsubishi ...
|
|
Mitsubishi Electric HG-JR22K1M 22kW 140N·m
Introduction: Mitsubishi Electric HG-JR22K1M CC-Link IE field network interface, SSCNET III/H interface, universal interface, absolute position · increments share 22-bit encoder (servo motor resolution per revolution: 4194304pulses/rev).
...
|
|
GT21-03PSGC-UC Japan Mitsubishi/Mitsubishi Electric Human Machine Interface (HMI) Accessory
GT21-03PSGC-UC Introduction: Mitsubishi Protection Board, For Use with HMI The GT21 model Mitsubishi Electric GOT2000 HMI inherits all the features of the GOT1000 series and introduces a more refined and advanced feature set. Clear, high-quality display designed for optimal ...
|
|
Contact
working hours
