Omron Multifunctional Small Inverter MX2-ZV1 Series 3G3MX2-ZV1 Coordinated motor and machine control Support for open networks
Easy position control with feedback
Position control can be achieved by receiving feedback pulses from the encoder.
In addition to the possibility of setting up to 8 positions in the inverter, the number of positioning sensors and limit switches can be reduced.
Network consolidation
Standard industrial networks such as EthereCAT, CompoNet or DeviceNet are optionally available.
With the Sysmac series, the high-speed EthereCAT is able to provide a complete solution for the entire system, from input to output.
Built-in RS-485 Modbus communication function.
Programming is flexible and convenient
The Drive programming tool allows customers to tailor the program to their machine (e.g. for square roll applications).
Allows up to 1000 lines of code and 5 tasks to run in parallel in 2 programming modes.
Motor control
Permanent magnet synchronous motor
Permanent magnet motors with high efficiency magnetism can be controlled.
Permanent magnet motors can further improve energy savings, resulting in more environmentally friendly machine control.
Torque sensors
Since the MX2 has a near-stationary (0.5Hz) starting torque of 200% and torque control operation in open-loop mode, it can also be used in applications where closed-loop vector control was previously used.
Built-in safety device
There is no need to use a contactor to stop the motor, and it can be fully combined with an Omron safety controller.
EN ISO13849-1：2008（Cat.3/PLd）
IEC60204-1 Stop Level 0
The name of the feature | specification | Protective structure *1 | Open (IP20) | control | Control mode | Sine wave modulated PWM mode | Output frequency range*2 | 0.10~400Hz (HF mode: 580Hz is limited) | Frequency accuracy*3 | Digital Commands: ±0.01% Max, Analog Commands: ±0.2% Max (25±10°C) | Frequency setting
resolution | Digital setting: 0.01Hz, analog setting: 1/1000 of the maximum frequency | Voltage/frequency characteristics | V/f characteristics (constant rotational pitch/reduced torque)
Sensorless vector control, V/f control with speed feedback | Overload current rating | Heavy Duty Rating (CT): 150%/60s
Light load rating (CT): 120%/60s | Instantaneous overcurrent quick break protection | 200% of CT | Acceleration/deceleration time | 0.01~3600s (line/curve selection), the second acceleration/deceleration setting is available | Carrier frequency adjustment range | 2~15kHz (with derating) | Starting torque | 200%/0.5Hz (Sensorless Vector Control) | External DC braking | When decelerating with the STOP command lowers the operating frequency or below the set value during operation,
Or when acting through external input. (The level and time can be set). | Protection features | Over-current protection, over-voltage protection, under-voltage protection, electric thermal protection, temperature anomaly protection,
- Ground fault overcurrent protection on power-up, inrush current protection circuit, overload limit, input overvoltage protection,
- External trips, memory errors, CPU errors, USP errors, communication errors,
Overvoltage suppression during deceleration, instantaneous power failure protection, emergency circuit breaking, etc. | Enter the signal | Frequency setting | Digital manipulator
External analog input signal: DC 0~10V/4~20mA, Modbus communication (Modbus-RTU) | Run/stop commands | Digital manipulator
External digital input signal (3-wire input supported), Modbus communication (Modbus-RTU) | Multi-function input | 7 points (59 optional functions) | Analog inputs | 2 points (voltage FV terminal: 10 bits/0~10V, current FI terminal: 10 bits/4~20mA) | Pulse input | 1 point (RP terminal: max. 32kHz, DC 5~24V) | Output signal | Multi-function output | 2 points (P1/EDM, P2; 43 optional functions) | Relay output | Point 1 (1c contact: MC, MA, MB; 43 optional functions) | Analog output
(Frequency Monitoring) | 1 point (AM terminal: voltage 10 bits/0~10V) (frequency, current optional) | Pulse output | 1 point (MP terminal: 32kHz max., 0~10V) | correspondence | RS-422 | RJ45 connector (for digital manipulators) | RS-485 | Control Circuit Terminal Block, Modbus Communication (Modbus-RTU) | USB | USB1.1, mini-B connector | Driver programming*4 | Calculation, logic, control I/O, etc | Other features | AVR function, V/f feature switching, upper and lower limit limit, 16-band multi-speed range, start-up frequency adjustment,
Jog Operation, Carrier Frequency Adjustment, PID Control, Frequency Jump, Analog Gain/Deviation Adjustment,
S-shaped acceleration/deceleration, electrothermal protection features, level adjustment, restart function, torque compensation function,
Abnormal Monitoring, Software Lock Function, Frequency Conversion Display, USP Function, Motor 2 Control Function,
UP/DOWN and overcurrent control functions, etc | Operating environment | Operating ambient temperature | -10~50°C (derating is required if the specified value is exceeded) | Store at ambient temperature | -20℃～65℃ | Humidity of the working environment | 20%~90%RH (no condensation) | Vibration resistant | 5.9m/s2(0.6G)、10～55Hz | Applicable environment | below 1000m above sea level; Indoor (no corrosive gases, dust) | Optional | EtherCAT communication unit | 3G3AX-MX2-ECT | CompoNet communication unit | 3G3AX-MX2-CRT-E | DeviceNet Communication Unit | 3G3AX-MX2-DRT-E | Other options | DC reactors, AC reactors, radio noise filters, input-side noise filters,
Output-side noise filters, regenerative braking units, braking resistors, and EMC noise filters, etc | International standards | EC
directives | EMC Directive | EN61800-3: 2004 | Low Voltage Directive | EN61800-5-1: 2007 | Machinery Directive | IEC60204-1 Stop class 0, EN IEC61800-5-2 (STO), EN ISO13849-1: 2008 (PLd) | UL/cUL | UL508C |
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Omron multifunctional small inverter 3G3MX2-ZV1N products, if you are interested in Omron, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Contact
working hours
