The KEYENCE/KEYENCE displacement meter LT-9000 series weighs approximately 2.4 kg

Introduction: Z-Axis Scanning: The confocal principle is applied to the tuning fork for high-precision measurements. X-Axis Scanning: The oscillation module produces a large scan area. Achieve higher measurement stability.

The KEYENCE/KEYENCE displacement meter LT-9000 series weighs approximately 2.4 kg

　　peculiarity

High-precision surface scanning method

Excellent resolution of 0.3 μm

Quick and easy set-up features

Multiple measurement modes for a wide range of applications

Product parameters

Model			LT-9001H	LT-9501HSO(5654)
Measurement module compatibility			The measuring modules are interchangeable without factory recalibration
display	Minimum display unit		0.1 µm*1，1 µm2，0.01 °		0.1 µm*1
	Display range		±9，999.99 µm、±999，999 µm2、9，999.99 °		±9，999.99 µm
	Microscope features		—		Yes
	Displays the period		10 times/sec*2
Terminal module	Analog output		±10 V x 2 Output, output resistance: 100 Ω
	Timing inputs		No voltage input
	Reset the input
	Auto-zero input
	The special power supply for the display is:		24VDC*3
controller	Judgment mode	3Step limit output	Applicable to: OUT1 (output 1) , OUT2 (output 2) and NPN Open collector output*4
	Binary	Binary output	Measurement data output (21 bit), Optional OUT1/OUT2/PROFILE (output 1/output 2/shape)NPN Open collector output*4
		Strobe pulse output	NPN Open collector output*4
		Binary selector output
		Binary choice input	No voltage input*4
	Stability output		NPN Open collector output
	Laser remote control input		No voltage input
	The program switches inputs		No voltage input x 3 input
PS-232Cinterface			Measurement data output and control input and output (Selectable up to the highest 115,200 bit/second Bode rate)
Video output			accord with NTSC system (Pin connector)
Key features:	Displacement mode		Distance measurement, translucency thickness measurement, angle measurement, correlation angle measurement, surface selection, anti-blacking, masking, trend graph display, and scan width/interval change*5		Distance measurement, translucent thickness measurement, surface selection, anti-blacking, masking, trend graph display, and scan width/interval change*6
	Shape mode		Area selection (average, maximum, minimum, maximum to minimum, area) Area calculation, scan width/interval change, anti-black, smoothing, averaging calculation, and shape data output*6		―*6
	General features		Light intensity accumulation, microscopy (LT-9501H, LT-9501HSO (5654)), tolerance judgment, 8-program login, calibration, averaging calculation, hold mode, auto-zeroing, and interface language selection
rated	Supply voltage		100 reach 240 VAC ±10 %、50/60 Hz
rating	Power consumption		utmost 110 VA
Environmental resistance	Pollution level		2
	Overvoltage category		II
	Ambient temperature		0 reach +35 °C
	relative humidity		35 reach 85 % RH (No condensation)
weight			about 2.4 kg

We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.

This article introduces the KEYENCE/KEYENCE displacement meter LT-9000 series products weighing about 2.4 kg, if you are interested in KEYENCE/KEYENCE displacement meter, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The KEYENCE/KEYENCE displacement meter LT-9000 series weighs approximately 2.4 kg

Sections viewed

Contact

working hours