Introduction: Murr Micro Safety + T 1 24 Safety Relay is a combination of several relays and circuits, in order to complement each other's abnormal defects, to achieve the complete function of the relay with correct and low malfunction, so that the lower the error and failure value, the higher the safety factor, so it is necessary to design a variety of safety relays to protect different levels of machinery, the main goal is to protect the mechanical operators exposed to different levels of danger. Mounting type snap-in mounting rails (EN 60715)
Features:
6 A（STOP1）; 8 A (STOP0) PROTECTION
Door/emergency stop monitoring light curtains
monitor
Safety solenoid switch monitoring
Automatic/manual/manual monitoring reset/start
Connection type: Spring-loaded plug-in terminal
Fixing type: Snap-in mounting rails (EN 60715)
Contact material: Ag Sn O, self-cleaning, active drive
24 VAC/DC - 2 NO contacts / 1 NO contact
Weight: 0.23 kg
Product parameters
Mechanical/electrical service life: 10,000,000 switching cycles/depending on load
Dimensions H×W×D: 100×22.5×121 mm
Temperature range: -25 - +60°C (storage temperature -40 ... +85°C)
outlet
Switching voltage: up to 250 V AC/DC
Switching current per output: max. 8 A (STOP0); Up to 6 A (STOP1)
Number of auxiliary contacts: 0
Number of message outputs: 1-(Y1)
Number of safety contacts: 2-(13-14), (23-24), STOP0; 1-（37-38），STOP1
entrance
Input voltage: 24 V DC (-15 + 20%), 24 V AC (-15 + 10%)
Power consumption: 5.9 VA / 2.4 W (plus message output)
Use categories
Safety contact (STOP 0): max. 250 V AC / 8 A; Min. 5 V AC / 5 mA (ohm./ind. ), with appropriate protection circuitry
Safety contact (STOP 1): max. 250 V AC / 6 A; Minimum 10 V AC / 10 mA (ohm./ind. ), with appropriate protection circuitry
AC-15: 6 A (230 V AC) stop 0; 3 A (230 V AC) stop 1
DC-13：5 A（24 V DC）STOP0; 2 A (24 V DC) STOP1
Safety-critical indicators
PL: until e(STOP0); Until d(STOP1)
Category: Up to 4 (STOP0); UP TO 3 (STOP1)
DC: 99% (STOP0); At least 60% (STOP1)
SIL: up to 3 (STOP0); UP TO 2 (STOP1)
Length of service: 20 years
This article introduces the Moore/Murr Micro Safety+ T 1 24 safety relay products, if you are interested in Moore/Murr relays, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy. Safety relay products, if you are interested in MURR/MURR relays, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Moore/Murr output relay 10531 working frequency 50-60Hz
Introduction: Moore/MURR output relay 10531
Features:
Current: 8 A
1-order
Attenuation curves are available separately
Product parameters
Technical data
Operating voltage max. 3× 600 V AC
Connecting wire diameter 0.2... 10 mm² ...
|
|
Moore/Murr output relay 6652001 Minimum load current 100mA
Introduction: The Moore/MURR output relays are 6652001 and are extremely compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr Output Relay 52031 Minimum load current 1mA
Introduction: Moore/MURR Output Relay 52031
Features:
1 Normally closed/normally open contacts
6 A
110 V AC/DC
Screw terminals
When the maximum switching voltage/current exceeds the limit value, the metal plating is damaged. The relay will have an output relay ...
|
|
Moore/Murr output relay 52005 load current 1mA
Description: The Moore/Murr output relay 52005 is extremely compact and of high quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Murr/Murr EMC Suppressor Module 23018 Size 75×45×42mm
Introduction: Moore/Murr EMC Suppressor Module 23018
Features:
3× 575 V AC
RC
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
Product parameters
Frequency...
|
|
Murr/Murr Micro Safety + Hand 24 Safety Relay 2 NO contacts
Introduction: Murr miniature safety + switch BCS L 24 safety relay is a combination of several relays and circuits, in order to complement each other's abnormal defects, to achieve the correct and low malfunction of the relay complete function, so that the lower the error and failure value, the more safety factors ...
|
|
Moore/Murr Output Relay 52003 Load current 1mA
Description: The Moore/Murr output relay 52003 is very compact and at the same time of high quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Germany Moore/Murr relay 50041 input current 6mA
Introduction: Germany Mohr/Murr relay 50041
Features:
Optocouplers, Semiconductors
No switch wear
* Fast changeover time
High-frequency contact switches
Resistant to EMC interference
Millions of contact switching cycles – even in ...
|
|
MURR/MURR Output Relay 52006 Minimum load current 100mA
Description: The Moore/Murr output relay 52006 is very compact and at the same time of high quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Moore/Murr output relay 51562 test insulation voltage 4kV
Description: The MUR/MURR output relay 51562 is very compact and at the same time extremely high-quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Murr/Murr power supply 85687 output voltage 24 VDC
Introduction: The MURR/MURR power supply 85687, packaged and compact design, has high vibration and shock resistance, and a large overvoltage resistance can effectively prevent voltage peaks such as lightning strikes in the vicinity
Features:
Emparro®67 Hybrid
2× MICO 7/8" IOL
...
|
|
Moore/Murr RMM 11/24 DC output relay outputs 250 VAC/DC/5 A
Description: The Murr/Murr RMM 11/24 DC output relay is incredibly versatile, with more than 600 different modules available for a wide range of applications, Push-in technology, choice of spring clip or screw terminals, worldwide approvals, TH35 or G32 (EN 607 ...
|
|
Moore/Murr Output Relay 51140 Test Isolation Voltage 1.5kV
Introduction: Moore/MURR Output Relay 51140
Features:
1 relay; 2 normally open contacts
2 A
24 V DC
Screw terminals
With negative plug connection
Product parameters
Temperature range: -25...+60 °C
Measure...
|
|
Moore/Murr output relay 6652005 Minimum load current 1mA
Description: The Moore/Murr output relay is 6652005 and is very compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr output relay 51301 Switching frequency 1Hz
Introduction: Moore/MURR Output Relay 51301
Features:
1 relay; 3 NO contacts/1 NC contacts
5 A
24 V DC
With forced guide contacts
Screw terminals
Product parameters
Temperature range: -20...+...
|
|
Murr/Murr output relay 51551 Minimum load current 100mA
Description: The Moore/Murr output relay 51551 is very compact and at the same time extremely high-quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr output relay 6652111 test insulation voltage 4kV
Description: The Moore/MURR output relay is 6652111 and is very compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Murr/Murr MIRO 6.2 24V output relay with load current 100 mA
About:Murr/Murr RM14/24 VAC/DC KL. BZ. The N.EN output relays are incredibly versatile, with more than 600 different modules for a wide range of applications, Push-in technology, choice of spring clips or screw terminals, worldwide approvals, DIN rail mounting.
|
|
Murr Miro 6,2-1 relay 6A, 24V DC
Description: The Murr/Murr Miro 6,2-1 relay is incredibly versatile, with more than 600 different modules for a wide range of applications, Push-in technology, choice of spring clips or screw terminals, worldwide approvals, and the ability to install DIN rails (EN 60715).
Features ...
|
|
Moore/Murr Output Relay 51410 Load current 0.1mA
Description: The Moore/MURR output relay 51410 is very compact and at the same time of high quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Contact
working hours
