Introduction: Murr Micro Safety + T2 24 Safety Relay is a combination of several relays and circuits, in order to complement each other's abnormal defects, to achieve the correct and low malfunction of the relay complete function, so that the lower the error and failure value, the higher the safety factor, so it is necessary to design a variety of safety relays to protect different levels of machinery, the main goal is to protect the mechanical operators exposed to different levels of danger.Automatic/manual/manual monitoring reset/start
Features:
6 A（STOP1）; 8 A (STOP0) PROTECTION
Door/emergency stop monitoring light curtains
monitor
Automatic/manual/manual monitoring reset/start
24 VAC
DC-3 normally open contacts
2 NO contact delays
Connection type: Spring-loaded plug-in terminal
Mounting type: Snap-in mounting rails (EN 60715)
Contact material: Ag Sn O, self-cleaning, active drive
Weight: 0.42 kg
Product parameters
Dimensions H×W×D: 100×45×121 mm
Temperature range: -25 - +60°C (storage temperature -40 ... +85°C)
outlet
Switching voltage: up to 250 V AC/DC
Switching current per output: 6 A max
Total current (STOP 0): 18 A (45°C); 15 A（55°C）; 12 A（60°C）
Total current (STOP 1): 12 A (45°C); 10 A（55°C）; 8 A（60°C）
Number of auxiliary contacts: 1-(31-32)
Number of message outputs: 3-(13-14); （23-24）; （33-34）
Number of safety contacts: 3-(13-14), (23-24), (33-34), STOP0; 2-（47-48），（57-58），STOP1
entrance
Input voltage: 24 V DC (-15 + 20%), 24 V AC (-15 + 10%)
Power consumption: 7.1 VA / 3.2 W max (plus message output)
Use categories
Safety contact (STOP 0): max. 250 V AC / 8 A; Minimum 10 V AC / 10 mA (ohm./ind. ), with appropriate protection circuitry
Safety contact (STOP 1): max. 250 V AC / 6 A; Minimum 10 V AC / 10 mA (ohm./ind. ), with appropriate protection circuitry
AC-15: 6 A (230 V AC) stop 0; 3 A (230 V AC) stop 1
DC-13：6 A（24 V DC）STOP0; 2 A (24 V DC) STOP1
Safety-critical indicators
PL: until e(STOP0); Until d(STOP1)
Category: Up to 4 (STOP0); UP TO 3 (STOP1)
DC: 99% (STOP0); At least 60% (STOP1)
SIL: up to 3 (STOP0); UP TO 2 (STOP1)
Mechanical/electrical service life: 10,000,000 switching cycles/depending on load
This article introduces Moore/Murr Micro Safety + T2 24 Safety Relay products, if you are interested in Moore/Murr Relay, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
Moore/Murr output relay 51562 test insulation voltage 4kV
Description: The MUR/MURR output relay 51562 is very compact and at the same time extremely high-quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Moore/Murr output relay 516014 tested isolation voltage of 2.5kW
Introduction: The Moore/Murr output relay is 516014 and is very compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr EMC Suppressor Module 21054 27.5×10×32mm
Introduction: Moore/Murr EMC Suppressor Module 21054
Features:
110 V AC/DC
230 V AC/DC
RC
For other configurations and voltages, please enquire.
Product parameters
Input voltage: 110... 250 V AC/DC
Material...
|
|
Moore/Murr Output Relay 51551 Test isolation voltage 4kV
Description: The Moore/MURR output relay 51551 is very compact and at the same time extremely high-quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
MUR/Murr miniature safety switch BCS L 24 safety relay 24VAC
Introduction: Murr miniature safety + switch BCS L 24 safety relay is a combination of several relays and circuits, in order to complement each other's abnormal defects, to achieve the correct and low malfunction of the relay complete function, so that the lower the error and failure value, the more safety factors ...
|
|
Murr/Murr EMC Suppressor Module 23018 Size 75×45×42mm
Introduction: Moore/Murr EMC Suppressor Module 23018
Features:
3× 575 V AC
RC
Suppressors for other voltages, frequencies, and motor powers need to be customized. RC suppressors must not be used in inverter motors.
Product parameters
Frequency...
|
|
Moore/Murr output relay 50040 with input current 6mA
Introduction: Moore/Murr Output Relay 50040
Features:
Transistor 1.2 A
24 V DC
Product parameters
input
Voltage range off 0... 3 V DC
Voltage range ON 10... 53 V DC
LED ...
|
|
Moore/Murr relay module 6652040 Switching frequency 10Hz
Introduction: Moore/Murr relay module 6652040
Features:
1 Normally closed/normally open contacts
6 A
230 V AC/DC
Spring-loaded terminals
Product parameters
Connection voltage - current: 230 V AC/DC (195... 253 V AC/DC） ...
|
|
Moore/Murr Output Relay 52111 Minimum load current 1mA
Description: The MUR/MURR output relay 52111 is very compact and at the same time extremely high-quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Moore/Murr output relay 6652106 Minimum load current 100mA
Description: The Moore/Murr output relay is 6652106 and is extremely compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr output relays 512498 Minimum load current 100mA
Description: The Moore/Murr output relay is 512498 and is very compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr EMC Suppressor Module 23115 Frequency 10... 400Hz
Introduction: Moore/Murr EMC Suppressor Module 23115
Features:
3× 400 V AC
VDR
For DIN-rail mounting, Art.-No. 20900 Fits feet
Suppressors for other voltages, frequencies, and motor powers need to be customized. R ...
|
|
Murr/Murr EMC Suppressor Module 3124071 Size 37×53×33mm
Introduction: Murr/Murr EMC Suppressor Module 3124071
Features:
48 V AC/DC
RC + LED
The plug gasket is removed during assembly, and other color LEDs can be customized
Product parameters
Shutdown spike voltage: max. 90 V
LED Finger ...
|
|
Moore/Murr Output Relay 51571 Minimum load current 1mA
Description: The Moore/Murr output relay 51571 is very compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Moore/Murr output relay 52160 test insulation voltage 4kV
Description: The Moore/Murr output relay 52160 is very compact and at the same time extremely high-quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Moore/Murr output relay 516001 Minimum load current 0.1mA
Description: The Moore/MURR output relay is 516001 and is very compact and of the highest quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr Output Relay 52050 Minimum load current 10mA
Description: The Moore/MURR output relay 52050 is very compact and at the same time of high quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequent ...
|
|
Moore/Murr output relay 6652041 Switching frequency 10Hz
Description: The Moore/MURR output relay is 6652041 and is very compact and at the same time of high quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Moore/Murr output relay 6652104 Minimum load current 100mA
Description: The Moore/Murr output relay is 6652104 and is very compact and at the same time of high quality. The integrated LEDs always show the current switching status. During operation, a few tabs are all it takes to keep the cabinet organized. Relay modules with pluggable relay assemblies are ideal for frequency ...
|
|
Murr/Murr MIRO 6.2 24VDC-1S Output Relay 24VDC
Description: The Murr MIRO 6.2 24VDC-1S output relay is incredibly versatile, with more than 600 different modules for a wide range of applications, Push-in technology, choice of spring clip or screw terminals, worldwide approvals, and DIN rail installation (EN 60715).
...
|
|
Contact
working hours
