Introduction: Autonics/Autonics AK-G series reduced 5-phase stepper motors are ideal for environments that require high torque. The AK-G series is low-cost, cost-effective, and available in a variety of frame sizes.
Features:
The space-saving design is ideal for compact system applications
Cost-effective, affordable, cost-effective
Backlash (frame size):
- 42mm : ±35’ （0.58˚）， 60mm : ±20’ （0.33˚）， 85mm : ±15’ （0.25˚）
Basic Step Angle:
- 1:5 → 0.144˚, 1:7.2 → 0.1˚, 1:10 → 0.072˚
Permissible Speed:
- 1:5 → 0 to 360rpm, 1:7.2 → 0 to 250rpm, 1:10 → 0 to 180rpm
Built-in brake (AK-GB series)
Brakes released when 24 VDC is applied to the brake line (AK-GB)
Frame sizes: 42 mm, 60 mm, 85 mm
Product parameters
Basic step angle [full/half]: 0.144º/0.072º
Maximum permissible torque: 35kgf.cm
Rotor moment of inertia: 280g · cm²
Winding resistance: 1.1Ω
Rated current: 1.4A/phase
Motor length: 94.5mm
Shaft type: single shaft
Reduction ratio: 1:5
Wiring: Pentagon
Degree of protection: IP30
authentication
Allowable speed range: 0 - 360rpm
Backlash: ±20' (0.33°)
Electromagnetic Brake - Rated Excitation Voltage: 24VDC ±10% (no-polarity)
Electromagnetic Braking - Rated excitation current: 0.33A
Electromagnetic braking_Static friction torque: Min. 8kgf.cm
Electromagnetic braking_rotor torque of inertia: 29×10-7kgf.cm²
Electromagnetic Brake - Type B Brake: Energized: Brake Released, Powered Off: Brake Run
Electromagnetic braking - action time: Max.20ms
Electromagnetic Braking - Release Time: Max. 25ms
Absolute Position Error: ±20' (0.33°)
Idling: ±20' (0.33°)
Weight: Approximately 1.57 kg (approximately 1.3 kg)
This article introduces Autonics/Autonics Gear 5-phase stepper motor A35K-M566-G5, if you are interested in Autonics/Autonics motor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Autonics Power Supply SPA-030-24 Output voltage 24VDC
Introduction: SPA series universal switching power supply provides efficient power conversion and stable power supply with minimal noise and ripple. Various output voltages (5 VDC, 12 VDC, 24 VDC) and output power (30 W, 50 W, 75 W, 100 W) are available for a wide range of applications. The SPA series also has ...
|
|
Autonics/Autonics Logic Touch Screen LP-A104-T9D9-C6T
Introduction: LP-A104 series logic touch screen is an all-in-one device with integrated PLC, HMI and I/O module functions, equipped with 32 input and 32 output contacts. The 10.4-inch widescreen TFT LCD display provides excellent visibility and data management capabilities. Resistive touch screen (analog touch ...
|
|
Autonics/Autonics Touchscreen GP-A070-T9D7 RAM: 64MB RAM
Introduction: GP-A070 series is a 7 inch widescreen TFT LCD graphic touch screen with excellent visibility and data management features. The resistive touch screen (analog touch) allows for flexible arrangement of labels, and the data logger function allows for data storage and backup from a variety of control devices. ...
|
|
Autonics Color LCD Graphic Touch Screen GP-A104-T9D9
Introduction: GP-A104 series is a 10.4 inch widescreen TFT LCD graphic touch screen with excellent visibility and data management functions. The resistive touch screen (analog touch) allows for flexible arrangement of labels, and the data logger function allows for data storage and backup from a variety of control devices.
|
|
Autonics Touch Screen LP-A070-T9D7-C5T 7 inch
Introduction: LP-A070 series logic touch screen is an all-in-one device with integrated PLC, HMI and I/O module functions, equipped with 16 input and 16 output contacts. The 7-inch widescreen TFT LCD display provides excellent visibility and data management capabilities. Resistive touch screen (analog touch) ...
|
|
Autonics Touch Screen GP-A057-T8D6 Built-in RTC
Introduction: GP-A057 series graphic touch screen is a 5.7 inch TFT LCD graphic HMI, bright and clear display provides 80 degree viewing angle. The resistive touch screen (analog touch) allows for flexible arrangement of labels, and the data logger function allows data storage from a variety of control devices.
|
|
Autonics/Autonics Encoder E40HB6-60-3-N-24
Introduction: The E40HB series hollow shaft embedded incremental rotary encoder has a 40mm size housing and can be installed in a small space. At the same time, the moment of moment of inertia of the shaft is very small, which minimizes the moment of inertia applied to the equipment. Encoders can be divided into shaft type, hollow shaft type and embedded ...
|
|
Autonics Cable Connector CID13P-10-SI 10m
Introduction: M17 connector cables are available in 6, 9, and 13-pin socket types and cable lengths (2 m, 5 m, 10 m) for a wide range of environments (2 m, 5 m, 10 m).
Product Details
M17 connector type 6-pin/9-pin/...
|
|
Autonics Button S2PR(U)-E3 2AL(M) is not flush
Introduction: Ø22/25 protrusion/dimming type button switch S2PR-E3, the contact part is a detachable unit, using silver contacts, to achieve high wear resistance, arc resistance and low impedance, durable, excellent conductivity. At the same time, high-brightness LEDs are used to improve visibility.
...
|
|
Autonics Power Supply SP-0305 weighs about 100g
Introduction: The SP series simple switching power supply adopts 3 W output power and is compact in size. 5 VDC, 12 VDC, and 24 VDC output voltage types are available. The switching power supply can be mounted on a DIN rail or with the screws of M4 for easy installation. The SP series also has a built-in overpower ...
|
|
Autonics/Autonics connectors C3M5P01-D9F0-D9M0
Introduction: Autotonics/Autonics Connector C3M5P01-D9F0-D9M0 Connector Communication Cables are available in a variety of connector types and can be used to connect a variety of devices.
Product parameters
Cable length : 3m
Cable thickness ...
|
|
Autonics Indicator LQ3RF-L4BL High Brightness LED
Description: The Autonics/Autonics LQ3RF series square □ 30 mm indicators are equipped with high-brightness LEDs for easy identification of status and are available in a variety of colors for different environmental settings.
Features:
High brightness l...
|
|
Autonics/Autonics Sensor Connector CNE Series Pitch 2mm
Introduction: Autotonics/Autonics Sensor Connectors CNE series sensor connectors use sensor pluggable wiring, which can significantly reduce installation work and maintenance time, helping to improve the productivity of industrial systems. And it is compatible with a wide range of cables and connection lines, making the sensing ...
|
|
Autotonics/Autonics Connector C1M8-2PR-A 2m
Introduction: M12 connector communication cable has RJ45 connectors for connecting a wide range of devices. The cables are available in standard and flexible versions for a wide range of environments.
Features:
M12 connector type 4-pin/ ...
|
|
Autonics/Autonics switching power supply SPB-030-05 DIN rail
Introduction: PB series switching power supply has high conversion efficiency, stable power supply, low noise, small ripple and low calorific value. The switching power supply can be easily mounted on a DIN rail or with screws. The ultra-versatile, compact design saves space. The series also features the inclusion of a terminal guard (SP ...
|
|
Autonics/Autonics motor Ai-M-42SA length 67.5mm
Description: Autonicx/Autonics Ai-M series 2-phase closed-loop stepper motors feature an integrated encoder for precise feedback control. The Ai-M series motor frame sizes are 20 mm, 28 mm, 35 mm, 42 mm, 56 mm, and 60 mm.
...
|
|
Autotonics/Autonics closed-loop stepper motor AiA-M-86MA 2 phase
Introduction: Compared with DC power supply type motors, the AiA-M series AC type 2-phase closed-loop stepper motor maintains higher torque at high speeds. The AiA-M series is available in frame sizes of 60 mm and 86 mm.
Products...
|
|
The Autonics/Autonics fiber amplifier BFX-D1-P weighs approximately 115g
Introduction: The BFX series fiber optic amplifier has dual digital LCD displays that display the current value and the set value. The amplifier unit has a fast response rate of up to 50μs and can detect fast-moving targets with high accuracy. This unit has 5 different response speed settings and 4 different ...
|
|
Autonics/Autonics stepper motor A35K-M566-RB5 single axis
Introduction: The AK-RB series rotary drive 5-phase stepper motor is ideal for applications that require high torque. AK-RB series has low cost and high economic benefits. The AK-RB series also has built-in braking for added convenience. Braking is possible when the brake signal (24VDC) is input.
...
|
|
Autonics stepper motor A35K-M566-R5 reduction ratio 1:5
Introduction: Autonics/Autonics AK-R Series Rotary Actuator 5-phase stepper motors are ideal for applications requiring high torque. The AK-R series has low cost and high economic benefits.
Features:
Space-saving design ...
|
|
Contact
working hours
