Fluke/FLUKE 712C RTD Calibrator Weight 515 g

Summary: The Fluke/Fluke 712C RTD Temperature Calibrator is an easy-to-use, highly accurate, and single-function test tool that is ideal for temperature calibration professionals.
Fluke/FLUKE712C

Features:

The 712C is capable of measuring and simulating (13) different RTD types

Measure a 4 to 20 mA signal while outputting a temperature signal source

Each device comes with a specially designed hanger

Configurable 0% and 100% source settings for fast 25% linearity testing

Linear gradients and 25% step auto-gradients based on 0% and 100% settings

Dual inputs and a backlit display make it easy to interpret measurement results

Automatically memorizes the settings when the power is off, so it is easy to restart the test when the power is on

1-year and 2-year specifications and traceable calibration reports

24V volt loop power supply

Product parameters

General technical indicators
The maximum voltage applied between any terminal and ground, or between any two terminals	30 V
Operating temperature	-10 °C to 50 °C
Storage temperature	-30 °C to 60 °C
Working altitude	2000 meters
Storage altitude	12000 meters
Relative humidity (relative operating humidity without condensation)	No condensation
	90% (10 °C to 30 °C)
	75% (30 °C to 40 °C)
	45% (40 °C to 50 °C)
	(non-condensing)
Vibration requirements	MIL-T-28800E, Class 2
Drop test requirements	1 meter
Ingress protection	IEC 60529: IP52
electromagnetic environment	IEC 61326-1: Portable
security	IEC 61010-1, 30 V max ground, contamination degree 2
power supply	4 x 5 gauge NEDA 15A IEC LR6 batteries
Dimensions (H x W x L)	52.5 mm x 84 mm x 188.5 mm
weight	515 g

DC mA measurements
resolution	0.001 mA
Range	0 to 24 mA
Accuracy (Percentage of Reading + Count)	0.010% + 2 μA
Temperature coefficient	± (0.002 % of reading + 0.002 % of range)/°C (<18 °C or >28 °C)

Ohmic measurements
Resistance range	Accuracy (Percentage of Reading + Count)
0.00 Ω to 400.00 Ω	0.015% + 0.05 Ω
400.0 Ω to 4000.0 Ω	0.015% + 0.5 Ω
Note: Reading accuracy is based on 4-wire input. For a 3-wire resistance measurement, add 0.05 Ω (0.00 Ω to 400.00 Ω) and 0.2 Ω (400.0 Ω to 4000.0 Ω) to the specification, assuming all three wires are matched.
Temperature coefficient	± (0.002 % of reading + 0.002 % of range)/°C (<18 °C or >28 °C)

Ohm output
Resistance range	1.0 Ω to 400.0 Ω
	1.00 Ω to 400.00 Ω
	400.0 Ω to 1500.0 Ω
	1500.0 Ω to 4000.0 Ω
Measure the excitation current of the device	0.1 mA to 0.5 mA
	0.5 mA to 3 mA
	0.05 mA to 0.8 mA
	0.05 mA to 0.4 mA
Accuracy (Percentage of Reading + Count)	0.015% + 0.1 Ω
	0.015% + 0.05 Ω
	0.015% + 0.5 Ω
	0.015% + 0.5 Ω
resolution	0.00 Ω to 400.00 Ω	0.01 Ω
	400.0 Ω to 4000.0 Ω	0.1 Ω
Temperature coefficient	± (0.002 % of reading + 0.002 % of range)/°C (<18 °C or >28 °C)
	Supports pulsed transmitters and PLCs with a pulse time of only 5 ms

Loop power supply
Open-circuit voltage	24 V ±10%
Load circuit voltage	18 V minimum at 20 mA
Temperature coefficient	± (0.002 % of reading + 0.002 % of range)/°C (<18 °C or >28 °C)
	Supports pulsed transmitters and PLCs with a pulse time of only 5 ms

This article introduces the Fluke/Fluke 712C RTD Calibrator products, if you are interested in the Fluke/Fluke 712C RTD Temperature Calibrator, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

Fluke/FLUKE 712C RTD Calibrator Weight 515 g

Sections viewed

Contact

working hours