First of all, don't use the handle as a pliers.
Using pliers is operated with the right hand. With the jaws facing inward, it is easy to control the cutting part of the pliers, and use the little finger to reach between the two pliers handles to resist the pliers, and open the pliers head, so that the handles are flexible to separate. Wire cutters commonly used by electricians are available in 150, 175, 200 and 250mm specifications. It can be purchased according to the needs of internal or external line work. The tooth notches of the pliers can also be used to tighten or loosen nuts.
The knife edge of the pliers can be used to cut the rubber or plastic insulation of flexible wires.
The knife edge of the pliers can also be used to cut wires and wires. When cutting No. 8 galvanized iron wire, the blade should be used to cut back and forth around the surface a few times, and then only need to pull lightly, and the wire will break.
The guillotine can also be used to cut hard metal wires such as wires and steel wires.
The insulating plastic pipe of the pliers is resistant to voltage more than 500V, with which it can be charged to cut wires. Do not litter during use to avoid damage to the insulated plastic pipe.
Do not use pliers as hammers.
Do not use pliers to cut double-strand live wires, it will be short-circuited.
When wrapping the clamp with pliers to fix the cable, the teeth of the pliers clamp the wire and wrap it in a clockwise direction.
Mouth pliers, commonly known as needle-nose pliers, are also one of the tools commonly used by electricians, especially internal line electricians. It is mainly used to cut single-strand and multi-strand wires with thin wire diameter, as well as to bend single-strand wire joints and strip plastic insulation.
The operation method of bending the wire joint with needle-nose pliers is as follows: first fold the wire head to the left, and then bend it to the right in the clockwise direction against the screw, that is, the needle-nose pliers are slightly modified and can be used as stripping needle-nose pliers. The method is: use an electric drill to drill 0.8 and 1.0mm two slot holes in the front section of the blade used for wire cutting in the needle-nose pliers, and then use 1.2 and 1.4mm drill bits respectively to expand it slightlyNote: Don't expand through, so that these two slots have a thin cutting edge. In this way, a needle-nose pliers that can cut and strip threads has been changed! Wire strippers are one of the commonly used tools for internal line electricians, motor repair, and instrumentation electricians. It is suitable for stripping plastics, rubber insulated wires and cable cores. The method of use is: put the thread to be peeled in the cutting edge of the pliers, pinch the two pliers handles by hand, and then loosen them, and the insulating skin will be separated from the core.
pincers
Pliers are a tool used to fasten, and some also have a cutting function. There are many types of pliers, but they all have a section for clamping the material, called a "jaw". The jaws are controlled by a lever and are able to generate a large clamping force. How to use pliers: 1. In general, the strength of pliers is limited, so it cannot be used to operate the work that the strength of ordinary hands cannot reach. In particular, small or ordinary needle-nose pliers can damage the jaws when using them to bend bar sheets with high bending strength. 2. The general wire cutter has three cutting edges, which can only be used to cut the wire, not the wire. 3. The handle of the pliers can only be held by hand, and cannot be strengthened by other methods.
|
More on that
|
What is the quality of Stanley hardware hand tools?
Stanley hardware hand tools have a very good reputation in the industry, but for most people, the quality of Stanley hardware hand tools, and how to distinguish with limited experience has become a problem. So today I will give you a systematic talk about why ...
|
|
THE PRACTICALITY OF THE STANLEY STANLEY TOOL CART
The Stanley tool cart, also known as the mobile tool cart, is a container device used to store hand tools and can be moved.
Mobile tool carts are mainly used in automobile 4S shops, automobile repair shops, assembly lines of large factories and other fields, such as bus factories ...
|
|
Applications and benefits of Stanley hydraulic picks
Provides truly powerful penetrating destructive power
No crushing tool has the impact crushing capacity of a hydraulic pick. With the highest power-to-weight ratio of all pickaxe tools, and its operating noise is far less than that of pneumatic tools, Stanley hydraulic picks are your best choice.
|
|
Contact
working hours
