Description: Germany Woehner QUADRON®60Classic NH fuse type disconnector, size 00, 160 A, busbar, up/down connection frame terminals, with motor fuse detector and CrossLink®Technology technology, suitable for busbars 12, 15, 20, 25, 30 x 5, 10 and special-shaped busbars.
Features:
CrossLink® Technology
Replace the upper and lower end outlets through the fast and safe modulation conversion module; The live part has touch protection
Easy and secure hook-and-connect
Secure connectivity is achieved with two-part touch protection
The busbar for rectangular busbars can be overridden for installation
Product parameters
Current rating (IEC): 160 A
Rated voltage (IEC) AC: 690 V
Rated voltage (IEC) DC: 250 V
Rated insulation voltage Ui DC: 250 V
Rated impulse withstand voltage Uimp: 2 kV
Conditional short-circuit current rating with fuse: 50 kA / 690 V
Working class with fuse measurement: gG
Power Output:
At 80% typical load, the power consumption reaches 11.3W.
(Power consumption at full load is 17.7 W.) ）
Maximum voltage IEC AC: 725 V
Fuse combination appliances in accordance with IEC 60947-3 are only allowed to operate above the rated operating voltage when used as a fuse-type isolator without breaking capacity, when used in excess of the rated insulation voltage and marked accordingly.
Suitable for gG and aM fuses according to IEC/EN 60269-2
The separation function between the incoming and outgoing connections is determined according to the opening requirements of the product standard for the switching mechanism
Mechanical values
W x H x D: 106 x 200 x 172
Weight: 180 kg/100
Number of poles: 3 lines
Suitable busbars: 12, 15, 20, 25, 30 x 5, 10 and profiled busbars
Frontal protection rating: IP30
Busbar connection: Pre-compressed elastic connection, convenient snap-on construction, easy to switch between 5 mm and 10 mm thick busbar by means of combination feet.
Connecting ends
Box Terminals:
1.5 -70 mm² fine conductors and fine conductors with conductor sleeves for connection to insulated die-cast conductor ends up to 95 mm²
1.5 -10mm² round single strand wire
16 -70mm² round stranded wire
2x10mm², 2x16mm² and 2x25mm² f+AE, identical conductors, side-by-side, cast on all sides
2x 10-35mm² f, identical conductors, side by side
Multi-layer soft copper bar 9-13mm wide
Opening space 13 mm x 13 mm
(Fine conductor + wire sleeve may not reach the maximum cross-sectional area)
Raw material properties
Main: Temperature resistance up to 125°C,
Flame retardant according to UL 94,
Creep resistance CTI 200,
Halogen-free
Touch protection: temperature resistance up to 125°C,
Flame retardant according to UL 94,
Creep resistant CTI 200
Cover: temperature resistance up to 125°C,
Flame retardant according to UL 94,
Creep resistance CTI 200,
Halogen-free
Adapter plate: temperature resistance up to 125°C,
Flame retardant according to UL 94,
Creep resistance CTI 200,
Halogen-free
Contacts: Pre-pressed elastic copper connections, silver-plated
This article introduces Woehner products, if you are interested in Woehner, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Woehner 31441 D FUSE HEADER BUSBAR, 42 MM
Introduction: Germany Woehner CUSTO®60Classic D fuse header, busbar, 42 mm locating bolt, E27/3 pole, suitable for busbars 12, 15, 20, 25, 30 x 5, 10 and special-shaped busbars.
Products...
|
|
Woehner Power BROOME10® 45 mm width
Description: The Broome10® is a 24 Vdc power supply developed by Wiener for automation and control systems for direct plugging to the CrossBoard® base system. The excellent conversion efficiency of this product is 95%, and the selection of high-quality components ensures that the power loss of this product is low, and the service life of this product is guaranteed.
|
|
Woehner 36256 Direct and Reverse Starter 3 Pole
Introduction: Germany Woehner/Wiener MOTUS®C14 30Compact Connect Plus hybrid motor starter, 3 poles. 0.1 - 2.6 A direct and reverse starters with IO-Link, with display, with CrossLink®Technology.
...
|
|
Woehner 31578D0 disconnector fuse set weighs 0.33 kg
Introduction: Germany Woehner/Wiener SECUR®60Classic EasyLiner D0 disconnector fuse set (busbar installation), suitable for 5-wire busbar system, for D01 and D02 fuses, E18 / 63 A / 3 poles, for busbars 12, 15, 20, 25, 30 x 5, ...
|
|
Woehner/Wiener Pedestal System CrossBoard405 3-wire
Introduction: The Woehner CrossBoard is available in two system widths: 225 mm and 405 mm. Both widths can be combined. The base system consists of a CrossBoard system, a power supply unit, a variety of adapters, NH fuse disconnectors, power supplies, hybrid motors, etc.
|
|
Woehner Universal Busbar Bracket 01430 Rated frequency 50/60Hz
Product Introduction: The new Pedestal System Adapter creates a new type of solution in combination with the 185Power system, which was not possible before. CrossBoard products can be easily connected to the adapter of the base system via the CrossLink interface. Components of DIN support rails, e.g. ...
|
|
Woehner 31525 D0 Disconnector Fuse Set Busbar Type
Introduction: Germany Woehner/Wiener SECUR®60Classic PowerLiner D0 disconnector fuse set (busbar mounting), suitable for D01 and D02 fuses, with LED, E18 / 63 A / 3 poles, suitable for busbars 12, 15, 20, 25, 30 x 5, 10 and different ...
|
|
Wiener busbar system closure element 185mm - System power 250
Introduction: The great advantage of the Wiener bus system enclosed element 185mm-System power 250 Wiener bus system is that the components are attached to the bus, and the bus bar is connected without holes.
Features:
Safe and reliable: fully enclosed ...
|
|
Woehner CrossBoard225 Pedestal System 125 A
Introduction: The Woehner CrossBoard is available in two system widths: 225 mm and 405 mm. Both widths can be combined. The base system consists of a CrossBoard system, a power supply unit, a variety of adapters, NH fuse disconnectors, power supplies, hybrid motors, etc.
|
|
Woehner Power Strip 01243 800 V
Introduction: Woehner Wiener terminal board 01243 is suitable for busbars 12, 15, 20, 25, 30x5, 10 and special-shaped busbars. When connecting uncut wires, the terminals can be removed.
Product Details
Number of poles: 3 lines
...
|
|
Woehner/Wiener busbar mounting fuse holder 31968 connect the bottom
Introduction: The 60 mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. All over the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Vernal ...
|
|
Woehner/Wiener busbar mount fuse holder 33421 to connect top/bottom
Product Description: The 60mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. Around the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Winal ...
|
|
Woehner 36200000A power supply
Product Introduction: The Woehner Power Supply 36200000A is directly mounted to the CrossBoard®, with an efficiency of 95%, an installation width of 45 mm, a self-protection function in case of a short circuit, a smart restart function, no pre-fuse required, an overvoltage capacity of up to 6 kV power supply 10 ...
|
|
Woehner busbar mount fuse holder 31959 with LED
Product Description: Busbar system technology is always modular and therefore guarantees maximum safety and flexibility, quick and easy installation, low maintenance costs and durable solutions.
Details
Standard IEC 60269-1:20 ...
|
|
Woehner Hybrid Switch 36153 Three-pole/One-Pole Current Rating 25A
Product Description: The 60mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. Around the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Winal ...
|
|
Woehner/Wiener Hybrid Motor Starter 36124 3-wire 500V
Introduction: Germany Woehner/Wiener MOTUS®30Compact hybrid motor starter, 3 poles 4 functions integration, left and right protection, structure width 22.5mm, 30 million electrical switching cycles, 0.18 - 3 A direct and reverse starter, with IO-Link, with CrossLi ...
|
|
Woehner NH Fuse Switch Isolator 33777 Module 4X
Product Description: The 60mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. Around the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Winal ...
|
|
Woehner Power BROOME10® Three-phase
Description: The Broome10® is a 24 Vdc power supply developed by Wiener for automation and control systems for direct plugging to the CrossBoard® base system. The excellent conversion efficiency of this product is 95%, and the selection of high-quality components ensures that the power loss of this product is low, and the service life of this product is guaranteed.
|
|
Germany Woehner/Wiener 32640 busbar adapter 160A 4 poles
Description: Germany Woehner EQUES®30Compact bus adapter 160 A, 4 poles, suitable for switchgear manufacturers, upper end connected to Schneider Electric INS100, INS125, INS160, suitable busbar 12 x 5
...
|
|
Woehner 31158 D0 disconnector fuse set three wires
Introduction: Germany Woehner/Wiener SECUR®60Classic PowerLiner D0 disconnector fuse set (busbar mounting), suitable for D01 and D02 fuses, E18 / 63 A / 3 poles, lower termination cable for busbars 12, 15, 20, 25, 30 x 5, 10 and special-shaped ...
|
|
Contact
working hours
