Introduction: Germany Woehner/Wiener SECUR®60Classic EasyLiner D0 disconnector fuse set (busbar installation), suitable for 5-wire busbar system, suitable for D01 and D02 fuses, E18 / 63 A / 3 poles, suitable for busbars 12, 15, 20, 25, 30 x 5, 10 and special-shaped busbars.
Product parameters
Rated current (IEC): 63 A
Rated voltage (IEC) AC: 400 V
Rated isolation voltage Ui AC: 500V
Rated impulse withstand voltage Uimp: 6 kV
Class of use AC (IEC 60947-3): AC-22B (400 V)
Conditional short-circuit current rating with fuse: 50 kA / 400 V
Working class with fuse measurement: gG
Power Output:
At 80% typical load, the power consumption reaches 4.5W.
(The power consumption at full load is 7 W.) ）
Fuse combination appliances in accordance with IEC 60947-3 are only allowed to operate above the rated operating voltage when used as a fuse-type isolator without breaking capacity, when used in excess of the rated insulation voltage and marked accordingly.
Degradation coefficient due to environmental influence:
35°C 1.0
45°C 0, 9
55°C 0.8
For fuses and positioning parts in accordance with DIN VDE 0636-3 IEC / HD 60269-3 / HD 60269-3
A D02 fuse with a silver-plated end cap is recommended
The separation function between the incoming and outgoing connections is determined according to the opening requirements of the product standard for the switching mechanism
Mechanical values
W x H x D: 27 x 200 x 80
Length x Width x Height: Fehlende Variable
Weight: 33 kg/100
Number of poles: 3 lines
Suitable busbars: 12, 15, 20, 25, 30 x 5, 10 and profiled busbars
Frontal protection rating: IP20
Connecting ends
1.5 - 16 mm² round stranded conductors and fine conductors without conductor sleeves
1.5 - 16 mm² fine conductor with conductor sleeve*
1.5 - 10 mm² fine conductors with boots
1.5 - 10 mm² round single strand conductor
* 16 mm² pressed using the crimping tool PZ 16, product type Weidmüller or
Use the pressure pliers Crimpfox 25R, model Phoenix Contact
Side mounting of the connecting conductor without side module (incl.) is 6 mm², and in the case of side module, the side mounting of the connecting conductor is up to (including) 10 mm²
Raw material properties
Housing: temperature resistance up to 130°C,
Flame retardant according to UL 94,
Creep resistant CTI 600
Halogen-free
Switch: temperature resistance up to 125°C,
Flame retardant according to UL 94,
Creep resistance CTI 600,
Halogen-free
This article introduces Woehner products, if you are interested in Woehner, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Woehner Power Strip 01243 800 V
Introduction: Woehner Wiener terminal board 01243 is suitable for busbars 12, 15, 20, 25, 30x5, 10 and special-shaped busbars. When connecting uncut wires, the terminals can be removed.
Product Details
Number of poles: 3 lines
...
|
|
Woehner Universal Busbar Bracket 01430 Rated frequency 50/60Hz
Product Introduction: The new Pedestal System Adapter creates a new type of solution in combination with the 185Power system, which was not possible before. CrossBoard products can be easily connected to the adapter of the base system via the CrossLink interface. Components of DIN support rails, e.g. ...
|
|
Woehner 36152 Hybrid Switch 3-pole or 1-pole breaking
Introduction: Germany Woehner/Wiener hybrid switch, 3-pole or 1-pole disconnect with CrossLink®Technology technology, up to 25A continuous current with current monitor, using hybrid technology to achieve more than 30 million switching cycles.
...
|
|
Woehner 01498 D0 Fuse Holder Busbar Type 36 MM
Introduction: Germany Woehner/Wiener CUSTO®60Classic D0 fuse holder, busbar, 36 mm with strip partition, E18 / 3 poles, suitable for busbars 12, 15, 20, 25, 30 x 5, 10 and special-shaped busbars.
Give birth...
|
|
Woehner Hybrid Switch 36153 Three-pole/One-Pole Current Rating 25A
Product Description: The 60mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. Around the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Winal ...
|
|
Woehner 36200000A power supply
Product Introduction: The Woehner Power Supply 36200000A is directly mounted to the CrossBoard®, with an efficiency of 95%, an installation width of 45 mm, a self-protection function in case of a short circuit, a smart restart function, no pre-fuse required, an overvoltage capacity of up to 6 kV power supply 10 ...
|
|
Woehner Power BROOME10® 45 mm width
Description: The Broome10® is a 24 Vdc power supply developed by Wiener for automation and control systems for direct plugging to the CrossBoard® base system. The excellent conversion efficiency of this product is 95%, and the selection of high-quality components ensures that the power loss of this product is low, and the service life of this product is guaranteed.
|
|
Woehner / Wiener busbar mounting fuse holder 33311 400A
Product Description: The 60mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. Around the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Winal ...
|
|
Woehner 36001 Busbar Adapter High temperature resistance of 125°C
Description: Germany Woehner EQUES®30Compact busbar adapter 16 A with CrossLink®Technology interface, 1 fixed support rail, with melt load 10x38 / CC class for busbar 12 x 5, 10. The clamping mechanism is used to slide on the busbar, and the wire ...
|
|
Woehner 36152 Hybrid Switch 25A/400V
Introduction: Germany Woehner/Wiener hybrid switch, 3-pole or 1-pole break with CrossLink®Technology technology, ** large 25A continuous current with current monitor, using hybrid technology to achieve more than 30 million switching cycles.
...
|
|
Woehner 31525 D0 Disconnector Fuse Set Busbar Type
Introduction: Germany Woehner/Wiener SECUR®60Classic PowerLiner D0 disconnector fuse set (busbar mounting), suitable for D01 and D02 fuses, with LED, E18 / 63 A / 3 poles, suitable for busbars 12, 15, 20, 25, 30 x 5, 10 and different ...
|
|
Woehner/Wiener Bus Adapter 32401 16A cross-connect interface
Product Description: The 60mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. Around the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Winal ...
|
|
Woehner 32590 Busbar Adapter 32 A
Description: Germany Woehner EQUES 30Compact busbar adapter 32A, 1 adjustable support rail, 45 x 160, with conductor AWG 10 (6 mm²), for busbar 12 x 5, 10 snap-on mechanism for sliding on busbar, ultrasonic casting at the end of the conductor.
...
|
|
Wiener busbar system closure element 185mm - System power 250
Introduction: The great advantage of the Wiener bus system enclosed element 185mm-System power 250 Wiener bus system is that the components are attached to the bus, and the bus bar is connected without holes.
Features:
Safe and reliable: fully enclosed ...
|
|
Woehner 32693 Bus Adapter 3-wire weight 0.198 kg
Description: Germany Woehner EQUES 30Compact busbar adapter 25 A, for switchgear manufacturers for direct starters Siemens S00 with spring-loaded terminal connection, for busbar 12 x 5, 10.
...
|
|
Germany Woehner/Wiener 32640 busbar adapter 160A 4 poles
Description: Germany Woehner EQUES®30Compact bus adapter 160 A, 4 poles, suitable for switchgear manufacturers, upper end connected to Schneider Electric INS100, INS125, INS160, suitable busbar 12 x 5
...
|
|
Woehner Motus® IO-Link Hybrid Motor Starter
Product Introduction: The MOTUS® Hybrid Motor Starter with IO-Link interface is a new product in the MOTUS® IO-Link family with networking functions that enables continuous communication between the control and device levels. The delivery of control instructions, the setting of control parameters, and the reading of equipment status can all be ...
|
|
Germany Woehner/Wiener 36124 hybrid motor starter 3 poles
Introduction: Germany Woehner/Wiener MOTUS®30Compact hybrid motor starter, 3 poles 4 functions integration, left and right protection, structure width 22.5mm, 30 million electrical switching cycles, 0.18 - 3 A direct and reverse starter, with IO-Link, with CrossLi ...
|
|
Woehner 33206 NH Fuse Type Disconnector 160A
Introduction: Germany Woehner/Wiener QUADRON®60Classic NH fuse type disconnector, size 00,160 A, busbar type, upper/lower connection frame terminal, with motor fuse detector and CrossLink®Technology technology, suitable for busbar 12, 15, 20, 25, ...
|
|
Woehner NH Fuse Switch Isolator 33777 Module 4X
Product Description: The 60mm busbar system technology is always modular, so it guarantees safety and flexibility, quick and easy installation, low maintenance costs and a durable solution. Around the world, more and more machinery manufacturing and equipment manufacturing enterprises trust and choose Winal ...
|
|
Contact
working hours
