Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The mini type is suitable for occasions where the installation space is limited, and the detection distance of most mini ordinary LED light sources is less than 1 meter, the detection distance of the mirror reflection type is less than 10 meters, and the through-beam type is about 20 meters, and the detection distance of the laser light source will be higher than this range. The detection range of the small and compact version will be further extended and the maximum through-beam distance of up to 350 meters is now available.
Product parameters
Actuators are pneumatic and valves are supplied separately
Maximum number of sensors
About 30 1)
About 50 2)
Logical operation mode Single trigger
Deduction type: Single Trigger, Blockade Trigger
Sensor Principle/ Detection Principle Diffuse photoelectric sensor, background suppression function
Dimensions (W x H x D) 50 mm x 147.4 mm x 48.9 mm
Maximum switching distance 60 mm ... 900 mm
Sensing distance 60 mm ... 900 mm
Type of light source Infrared
Light source LED 3)
Spot size (distance) Ø 20 mm (500 mm)
The scattering angle of the emitter is 7°
Set the potentiometer, 9 gears
Special application area control
Supply voltage 19.2 V DC ... 27.6 V DC 1)
Residual Ripple < 5 Vss 2)
Current consumption 20 mA 3)
Switching output PNP
Signal voltage PNP high/low approx. UV - 0.5 V / 0 V
Output current Imax. ≤ 100 mA
Response time 2 ms
Switching frequency 250 Hz
Connection type Plug, M12, 4-pin
Type of connection for series circuits Cable with socket, M12, 4-pin 2 m
Protection circuits
A 4)
C 5)
D 6)
Protection class III
Weight 175 g
Housing material: plastic, ABS
Enclosure rating IP65
Shock & Vibration Resistance According to IEC 68
Operating ambient temperature –10 °C ... +55 °C
Storage ambient temperature –40 °C ... +75 °C
UL File No. NRKH. E189383 & NRKH7. E189383
Solenoid valve medium Filtered compressed air or neutral gas, not oiled and oiled
Solenoid valve profile 3/2 three-way valve
Solenoid valve operation Air to Drive (NC)
Solenoid valve connection type Compressed air 2 x 8 mm diameter, working cable 4 mm diameter
Coil value 24 V DC 2 W
Ventilation is approximately 20 Nl/min
Ventilation capacity approx. 130 Nl/min
Operating pressure range 2 bar ... 8 bar
This article introduces SICK/Sick photoelectric sensor products, if you are interested in RKC, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
The sensing distance of the SICK sensor GTE6-N1212 is ≤ 250 mm
Product Introduction
Product name: SICK Sick
Product type: miniature photoelectric sensor
Model: GTE6-N1212
Features:
Working principle Diffuse photoelectric sensor
Working principle details Energy type
Maximum switching distance ...
|
|
SICK/SICK miniature photoelectric sensor WTB4S-3N1362V diffuse reflector
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK i14-M0213 Lock Operation: ≥ 12 N
Product Introduction
Product name: SICK
Product Type: Safety locking device
The product family i14 Lock
Model i14-M0213 Lock
Sensor principle: electromechanical
Locking Principle: Quiescent current principle
Lockdown monitoring ...
|
|
SICK compact photoelectric sensor WTS26P-1H161120A00
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Sick Dx35 / DT35 medium-range distance sensor Power consumption ≤ 1.7 W 4)
Description: SICK Dx35 / DT35 medium-range distance sensor Power consumption ≤1.7 W 4), weight: 65 g, functions: process data, parameter setting, diagnostics.
parameter
Supply voltage UV: DC 12 V ... 30 V 1) 2)
Residual ripple: ≤ 5 Vss 3 ...
|
|
SICK W100-2 miniature photoelectric sensor 25.4 mm mounting hole spacing
Applications:
It is widely used in various fields that require miniature photoelectric sensors
Inspection of logistics pallets or workpieces on conveyor lines
Workpiece positioning on the fixture
Positioning of items on shelves
Mixed material inspection in the packaging industry
Access control system ...
|
|
SICK miniature photoelectric sensor GRL18S-P1356 Retro-reflective type
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK Miniature Photoelectric Sensor WL4-3P2230 Retroreflective Double Lens
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK cylindrical photoelectric sensor GRSE18S-P2442 The axis length is 650 nm
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
The SICK/SICK miniature photoelectric sensor WL4S-3F3132 is self-aligning
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick cylindrical photoelectric sensor GRSE18-P2421V through-beam type
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
The SLG-2 switching automation light grid has an operating range of 1.7 m
Introduction: SICK Switching Automation Light Grid SLG-2 Operating Range: 1.7 m, Beam Distance: 25 mm, Operating Principle: Receiver/Transmitter, Parallel Beam Operation (Recommended): 440 mm ... 1,700 mm。
parameter
Working principle: Receiver/transmitter
...
|
|
SICK Photoelectric Sensor WL34-V230 10 V DC ... 30 V DC
Product Introduction
Product name: SICK
Product Type: Retro-reflective photoelectric sensors
Product family W34
Model WL34-V230
Working principle Retroreflective photoelectric sensor
Details of the working principle of the double lens
Size...
|
|
SICK/Sick miniature photoelectric sensor GSE2F-F5151 800Hz4
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/Sick cylindrical photoelectric sensor GRSE18-N1147
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
The small photoelectric sensor WT12L-2B530 from SICK has a focal length of 45 mm
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
GRL18S-P2436 cylindrical photoelectric sensor Current consumption: 30 mA
Product Introduction
Working principle: Retro-reflective photoelectric sensor
Working Principle Details: Double Lens
Dimensions (W x H x D): 18 mm x 18 mm x 38.1 mm
Housing shape (beam outlet): cylindrical
Screw diameter (housing): M18 ...
|
|
SICK/Sick Miniature Photoelectric Sensor WTB9M4-3P2261 Plug 4-pin
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK Miniature Photoelectric Sensor WSE2S-2E1330 LED Square
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick miniature photoelectric sensor WTB4-3F1361 3-core 2 m
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|