Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The mini type is suitable for occasions where the installation space is limited, and the detection distance of most mini ordinary LED light sources is less than 1 meter, the detection distance of the mirror reflection type is less than 10 meters, and the through-beam type is about 20 meters, and the detection distance of the laser light source will be higher than this range. The detection range of the small and compact version will be further extended and the maximum through-beam distance of up to 350 meters is now available.
Product parameters
Sensor Principle / Detection Principle Diffuse photoelectric sensors, TwinEye technology, background suppression
Dimensions (W x H x D) 24.6 mm x 82.5 mm x 53.3 mm
Housing shape (beam outlet) Square
Maximum switching distance 10 mm ... 1,000 mm 1）
Type of light source: Visible red light
Light source PinPoint-LED 2)
Spot size (distance) Ø 10 mm (550 mm)
Shaft length 635 nm
Supply voltage 10 V DC ... 30 V DC 1）
Residual ripple ≤ 5 Vss
Current consumption
30 mA 2）
50 mA 3）
Current consumption, transmitter 3)
Current Consumption, Receiver 3)
Switching output
Reverse pulse: PNP/NPN
PNP
NPN
Output QL1 / C output signal switching device or IO-Link mode
Switch Type: Bright/Dark Switching
Signal voltage PNP high/low approx. UV - 2.5 V / 0 V
The signal voltage NPN high/low is approximately less than 2.5 V
Output current Imax. ≤ 100 mA
Response time ≤ 1.4 ms 4)
Switching frequency 350 Hz 5)
Connection type Cable, 2 m 6)
Wire Material: PVC
Protection circuits
A 7）
B 8）
C 9）
D 10）
Protection class III
Weight 130 g
IO-Link ✔
Housing material plastic, VISTAL®
Materials, Optics Plastics, PMMA
Enclosure rating
IP66 (according to EN 60529)
IP67 (according to EN 60529)
IP69 (according to EN 60529 11)
Operating ambient temperature –40 °C ... +60 °C
Storage ambient temperature –40 °C ... +75 °C
UL File No. NRKH. E181493 & NRKH7. E181493
This article introduces SICK/Sick photoelectric sensor products, if you are interested in RKC, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
SICK/Sick miniature photoelectric sensor WTB4S-3P2261 potentiometer 5 turns
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/SICK miniature photoelectric sensor WSE4-3P2130S03 through-beam type
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/SICK cylindrical photoelectric sensor GRTB18S-P2412VS01 Diffuse reflection
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK multi-task photoelectric sensor IRT-P212E40 single trigger
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK WL2S-2N3030S05 Miniature Photoelectric Sensor Self-aligning
Product Introduction
Working principle: Retro-reflective photoelectric sensor
Working Principle Details: Automatic Alignment
Dimensions (W x H x D): 7.7 mm x 21.8 mm x 13.5 mm
Housing shape (beam outlet): square
Maximum switching distance: 0 ...
|
|
SICK/SICK Miniature Photoelectric Sensor WL4-3P2230 Retroreflective Double Lens
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK deTem multi-beam safety photoelectric sensor Number of beams: 4
Introduction: SICK/SICK deTem multi-beam safety photoelectric sensor Number of beams: 4, Beam distance: 300 mm, Current carrying capacity: ≤ 100 mA, Supply voltage UV: 24 V DC (19.2 V DC ... 28.8 V DC) 2)。
parameter
Applications: Standard industrial ...
|
|
SICK/SICK cylindrical photoelectric sensor GRSE18-P2447 optical axis axial
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK Drive Assist System Power consumption: 4 W
Introduction: SICK/SICK Drive Assist System Power consumption: 4 W, working area: 0.05 m ... 25 m, operating voltage of the machine: 9 V DC ... 28 V DC, areas of application: indoor and outdoor areas (8 m).
Industry applications
Industrial Vehicles ...
|
|
SICK Miniature Photoelectric Sensor WTB4S-3N1164 cable 4-pin 2 m
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK sensor IME12-04NNOZW2K diameter: Ø 12 mm
Product Introduction
Product name: SICK
Product Type: Inductive proximity sensors
Model IME12-04NNOZW2K
Design Construction: Metric design
Housing shape Short
Thread size M12 x 1
Ø 12 mm
Trigger...
|
|
SICK/SICK miniature photoelectric sensor WTB2S-2P1360 cable 3 cores
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/SICK cylindrical photoelectric sensor GRL18-P1132 M18x1
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK GRTB18-P2417 cylindrical photoelectric sensor
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/SICK Miniature Photoelectric Sensor WL4-3F1330 Cable 3 cores 2m
Product introduction: Photoelectric sensor is high-tech automation needs intelligent detection. Smart Sensors generate and receive data and information that goes far beyond traditional switching signals or measured process data. As a result, sensors offer significant efficiency gains, greater flexibility and better safety planning in advance.
|
|
SICK/Sick cylindrical photoelectric sensor GRTE18S-P1342 M18 x 1
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Sick gloss sensor OPR20G-RB111517 sensing distance: 50 mm
Product Introduction
Brand: SICK
Type: Glossy sensor
Model: OPR20G-RB111517
Sensor principle: Delta-S technology ®
Dimensions (W x H x D): 42.5 mm x 44 mm x 43.4 mm
Sensing distance: ...
|
|
The SICK/Sick cylindrical photoelectric sensor GRSE18S-P233Y is axially flush
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
The VL18L-4N344 cylindrical photoelectric sensor from SICK has a housing length of 107.7 mm
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
SICK/SICK miniature photoelectric sensor WL4S-3P3432V single teach-in button
Introduction: SICK photoelectric sensors are divided into mini, small, compact, optical fiber and cylindrical according to the size and installation method; From the working mode, it is divided into diffuse reflection, mirror reflection and through-beam type. It is usually used for the localization and detection of moving objects. The miniature type is suitable for installing empty ...
|
|
Contact
working hours
