Product introduction: Goodrive18 is a simple two-in-one inverter, with excellent drive performance and control functions, rich hardware configuration, powerful software functions, optimized structural design, and improved ease of use and reliability. It is suitable for applications that require 2 or more inverters of the same power or similar power for the same equipment.
Specifications:
Description of the function | Specifications | skill technique control system sex Yes | Input Voltage (V) | -4 model: three-phase 380V(-15%)~440V(+10%) | Output Frequency (Hz) | 0~400Hz | Control mode | V/F control mode, no PG vector control mode | Motor type | Asynchronous motors | Speed range | 1：100 | Speed control accuracy | ±0.2% (without PG vector control) | Fluctuations in speed | ± 0.3% (without PG vector control) | Torque response | <20ms (no PG vector control) | Torque control accuracy | 10% (no PG vector control) | Starting torque | 0.5Hz 150% (without PG vector control) | Overload capacity | 150% rated current for 1 minute, 180% rated current for 10 seconds, 200% rated current for 1 second. | fortune Yes control system special sex | Frequency setting method | Keypad number setting, analog setting, multi-speed operation setting, simple PLC setting, PID setting, MODBUS communication setting, etc. It can realize the combination of settings and the switching of set channels. | Automatic voltage adjustment function | When the grid voltage changes, it can automatically keep the output voltage constant. | Fail-safe function | Provide comprehensive fault protection functions: over-current, over-voltage, under-voltage, over-temperature, phase loss, overload and other protection functions. | outside surround pick up mouth | Analog inputs | AI2: 0~10V/0~20mA voltage and current type can be used through the function code P05.49choose AI3: -10V~10V voltage AI2/AI3 has a minimum resolution of 10mV/20mV | Analog output | 1. Output range: AO1/AO2, 0~10V voltage or 0~20mA current 2. The voltage or current output is selected by the jumper of the control board. 3. The error at full scale is ±1%, 25°C | Digital inputs | 8 normal inputs, maximum frequency 1kHz; | Relay output | Two Programmable Relay Outputs: RO1A normally open, RO1B normally closed, RO1C common end; RO2A normally open, RO2B normally closed, RO2C common end; Contact capacity: 3A/AC250V. | that it | Installation: | Wall mounting | Brake unit | not | EMI filters | An optional external filter can be used to meet the requirements of IEC61800-3 C3/C2 class. | Operating ambient temperature | -10~50°C, derating 1% for every 1°C above 40°C | Ingress protection | IP20 | Pollution level | Level 2 | Safety regulations | CE compliant | Cooling method | Forced air cooling |
The company has been with the concept of "customer first", quality and service to win the market, hoping to cooperate with all sectors of society, mutual benefit and win-win, create brilliance, and work together to create a better tomorrow! In line with the concept of honest service, the company welcomes new and old customers to inquire, on-site inspection, and negotiation business.
|
More on that
|
INVT inverter GD350-13-015G-4 output frequency 0-400Hz
Introduction:INVT Inverter GD350-13-015G-4, GD350-13 series inverter realizes the integration of synchronous motor drive and asynchronous motor drive, integrates the control of different types of pumping units such as tower type, beam type, direct drive screw pump, etc., and strengthens the reliability of the product at the same time.
|
|
INVT inverter GD35-075G-6-C1/D1/H1 input current 85A
Introduction:INVT Inverter GD35-075G-6-C1/D1/H1, GD35 series high-performance closed-loop vector inverter, with high control accuracy, high starting torque, high speed ratio and fast response closed-loop control performance, but also has spindle positioning, simple servo function, control accuracy ...
|
|
INVT inverter GD20-09-2R2G-4-B protection grade IP20
Introduction:INVT Inverter GD20-09-2R2G-4-B, GD20-09 Series Lifting Inverter for electric hoist, European crane, small tonnage gantry or overhead crane load characteristics and control requirements research and development of lifting special open-loop vector inverter, in line with lifting industry standards ...
|
|
INVT Fan Water Pump Inverter GD270-280-4 Input current 540A
Introduction:INVT fan pump special inverter GD270-280-4 is a fan pump special inverter, which is optimized for fan pump applications to make it easier to use, and can be applied to fans in sewage treatment, HVAC, chemical, metallurgy, electric power and other industries.
|
|
INVT Fan Water Pump Inverter GD270-200-4-L1 Input current 368A
Introduction:INVT Fan Water Pump Special Inverter GD270-200-4-L1 is a special inverter for fan and water pump, which is optimized for fan pump applications to make it easier to use, and can be applied to wind and water in sewage treatment, HVAC, chemical industry, metallurgy, electric power and other industries.
|
|
INVT inverter GD35-132G-6-C1/D1/H1 input current 145A
Introduction:INVT Inverter GD35-132G-6-C1/D1/H1, GD35 series high-performance closed-loop vector inverter, with high control accuracy, high starting torque, high speed ratio and fast response closed-loop control performance, but also has spindle positioning, simple servo function, control accuracy ...
|
|
INVT/INVT MF100 50Hz/60Hz
Product introduction: MF10 series electromagnetic heater is a special product developed by INVT for electromagnetic heating applications, which realizes the conversion of three-phase power frequency mains into single-phase high-frequency power supply; The product adopts DSP digital control platform, develops new hardware and special software, and integrates resonant capacitors.
|
|
INVT inverter GD35-315G-4-C1/D1/H1 input current 580A
Introduction:INVT Inverter GD35-315G-4-C1/D1/H1, GD35 series high-performance closed-loop vector inverter, with high control accuracy, high starting torque, high speed ratio and fast response closed-loop control performance, but also has spindle positioning, simple servo function, control accuracy ...
|
|
INVT inverter GD350-19-280G-4 protection grade IP20
Introduction:INVT Inverter GD350-19-280G-4, GD350-19 series lifting inverter is a new generation of lifting inverter launched by INVT based on more than ten years of experience in the lifting industry, combined with the best control theory; It has excellent control performance and rich safety protection functions.
|
|
INVT inverter GD350-19-200G-4 protection grade IP20
Introduction:INVT Inverter GD350-19-200G-4, GD350-19 series hoisting inverter is a new generation of hoisting inverter launched by INVT based on more than ten years of experience in the lifting industry, combined with the best control theory; It has excellent control performance and rich safety protection functions.
|
|
INVT Industrial HMI VK2043-N0CXR Flash 8MB
Introduction:INVT Industrial HMI VK2043-N0CXR, VK series HMI is a human-machine interface with rich display, huge memory, powerful configuration functions and simple use. It can easily realize human-computer interaction functions in various fields of industrial automation.
Product parameters
Firm...
|
|
INVT/INVT Photovoltaic Water Pump Special Inverter Goodrive100-PV
Product introduction: Goodrive100-PV series inverter is INVT's new inverter for photovoltaic water pump applications, on the basis of the original photovoltaic water pump product GD100-01, the product ease of use, product performance has been optimized, and the applicable voltage level and ...
|
|
INVT inverter GD350-13-030G-4 output frequency 0-400Hz
Introduction:INVT Inverter GD350-13-030G-4, GD350-13 series inverter realizes the integration of synchronous motor drive and asynchronous motor drive, integrates the control of different types of pumping units such as tower, beam and direct drive screw pump, and strengthens the reliability of the product at the same time.
|
|
INVT/INVT MG single-phase grid-tied inverter BG4KTR has a maximum input power of 4.8kW
Introduction:INVT MG single-phase grid-tied inverter BG4KTR photovoltaic grid-connected inverter is a photovoltaic string inverter specially developed by INVT for villas and small commercial users, using advanced T-type three-level topology and SVPWM (space vector pulse width modulation) combined technology, small size, heavy ...
|
|
INVT inverter GD350-13-045G-4 protection grade IP20
Introduction:INVT Inverter GD350-13-045G-4, GD350-13 series inverter realizes the integration of synchronous motor drive and asynchronous motor drive, integrates the control of different types of pumping units such as tower, beam and direct drive screw pump, and strengthens the reliability of the product at the same time.
|
|
INVT inverter GD20-09-004G-4-B protection grade IP20
Introduction:INVT Inverter GD20-09-004G-4-B, GD20-09 Series Lifting Special Inverter for electric hoist, European crane, small tonnage gantry or overhead crane load characteristics and control requirements research and development of lifting special open-loop vector inverter, in line with lifting industry standards ...
|
|
INVT Inverter GD35-018G-4-C1/D1/H1/H2 Input current 47A
Introduction:INVT Inverter GD35-018G-4-C1/D1/H1/H2, GD35 series high-performance closed-loop vector inverter, with high control accuracy, high starting torque, high speed ratio and fast response closed-loop control performance, but also has spindle positioning, simple servo function, control ...
|
|
INVT/INVT Construction Elevator Control All-in-One Machine Goodrive300-39
Product introduction: Goodrive300-39 is a special inverter with integrated control specially developed for the load characteristics and control requirements of construction hoists. Integrate the electrical logic, frequency conversion control, brake power supply, overload protection function of the construction hoist, and increase the text display, voice broadcast, and building ...
|
|
INVT inverter GD18-5R5-4-2 wall mount
Introduction:INVT inverter GD18-5R5-4-2, GD18 is a simple two-in-one inverter, with excellent driving performance and control functions, rich hardware configuration, powerful software functions, optimized structural design, and improved ease of use and reliability. Suitable for the same ...
|
|
INVT three-phase grid-connected inverter BG20KTR maximum DC input voltage 1000V
Introduction:INVT three-phase grid-connected inverter BG20KTR is a photovoltaic string inverter developed by INVT for commercial users and distributed ground power stations, using advanced T-type three-level topology and SVPWM (space vector pulse width modulation) combined technology, high power density, module ...
|
|
Contact
working hours
