Japan Rika RKC THV-1 single-phase power conditioner

Product Description

Japan Rika RKC THV-1 single-phase power conditioner, 48mm wide, 172mm high, 125mm deep compact design (20/30A type). It is conducive to the miniaturization of control panels and control boxes. A digitally controlled regulator equipped with a front display and a setting button can be used to control high-speed heating with fast response when soft start (soft start) or soft stop is set to 0. Soft start (soft start)/soft stop, manual/automatic switching, slope setting, output limit, output bias and other rich functions. Heater disconnection alarm, current limit, constant current control, etc. can be attached.

RKCTHV-1

Control mode: phase control/zero cross control (switchable)

*Large load capacity: AC20A, AC30A, AC45A, AC60A, AC80A, AC100A

Applicable loads: Linear (R: impedance) loads (in the case of phase control: 1st side control with variable voltage, *1 Please refer to the primary side control protection function of the transformer)

Input signal: DC4 - 20mA, DC1 - 5V, DC0 - 10V, DC0/12V

Output Mode: Phase Angle Ratio, Voltage Ratio, Voltage Self-Multiplication Ratio (Standard)

Power frequency: 50/60Hz shared (automatic identification)

Digital display contents: input value, phase angle ratio value, frequency value, control mode, SOFT UP/SOFT DOWN time, slope setting value, output limiter (upper and lower limit), BASE UP setting, output mode, external contact operation, etc

Standard extras

Automatic/manual switching (optional external setting), output limiter, BASE UP setting (output deviation),

Slope setting function (external setting optional)・SOFT UP/SOFT DOWN function・

2. Position control (optional external upper limit and lower limit setting)

< optional function >

Heater disconnection alarm, current limiter, constant current control

General specifications

Operating temperature range: performance guarantee range 0-40°C, operation guarantee range -15-+55°C

Power supply voltage (quota): AC100-240V

Mass: 20A/30A type approx. 0.9 kg, 45A/60A type approx. 1.4 kg, 80A/100A type approx. 1.9 kg

Safety Specification *2: UL UL508

　　cUL　C22.2 No.14

CE Low Voltage Directive (LVD): EN60947-4-3

EMC Directive: EN60947-4-3

*1: The transformer is related to the primary control protection function

When controlling the primary side of the transformer, use the control protection function of the primary side of the transformer.

The primary control protection function of the transformer suppresses excessive current caused by a momentary power failure on the load side (transformer).

If there is no transformer primary control protection function, excessive current may occur, so use a beam density of 1.25 T or less

of transformers. Also, be sure to make the soft-start feature active.

*2: CE marking

CE marking is only valid if it is performed with a specified interference filter

Specified interference filter: Shuangxin Electric Co., Ltd. (please prepare your own)

The company has always been customer-oriented, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow!

Japan Rika RKC THV-1 single-phase power conditioner

Sections viewed

Contact

working hours