Main features
environmental protection
The push rod conduction method is adopted, and there is no polluting resin such as mercury.
High reliability and precision
The triple structure of the impulse section and the design of the impulse tube cover reduce heat from the outside or changes in the display during tightening. (Pressure tube cover is optional)
The combination of a built-in linearization display and an inverter enables high-precision pressure measurement with the highest accuracy of 0.5% FS. (Linearization correspondence optional)
A temperature sensor can be built-in
Built-in thermocouple temperature sensor type. Resin pressure and temperature can be measured with a single mounting port. (Thermocouple: K, J type class 2)
Compatible with high temperatures up to 550°C
SPRON alloy diaphragm specifications can achieve a maximum service temperature of 550°C and corrosion resistance. It is possible to measure the pressure of functional resins such as polymeric resins.
*If the temperature sensor is a J-type thermocouple, it is 450°C.
Main specifications:
Pressure conversion mode: Strain gauge Wheatstone bridge
Range (Rated Pressure): Please refer to the Pressure Range Specification Table
Accuracy and line type: Within ±1% span (at 150°C for SUS630 diaphragm)
*±2% for types larger than 70MPa
*In the case of SPRON alloy film specifications
10, 20, 70MPa and the temperature above 480°C: 2.0% of the ± of the span
At 100MPa: 2.0% of ± span
100MPa and above 480°C: ± of span 4.0%
*Please contact our sales staff for HASTELLOY C alloy film specifications.
Hysteresis: within 0.5% of the ± of the span
* ±1% for 50 MPa or more, ±2% for 70 MPa or more, ±0.2% for 1 MPa
*In the case of SPRON alloy film specifications
70MPa or less: 1.0% of the ± of the span
10, 20, 70MPa and the temperature above 480°C: 2.0% of the ± of the span
At 100MPa: 2.0% of ± span
100MPa and above 480°C: ± of span 4.0%
*Please contact our sales staff for HASTELLOY C alloy film specifications.
Maximum film operating temperature: 400°C (550°C for SPRON film)
The maximum operating temperature of the pressure conversion bridge: 200°C
* If the surface temperature under the outer cylinder (nut side) reaches 180°C or more, the pressure measurement area is about 200°C. If the pressure measurement area exceeds 200°C, there is no guarantee that its performance will be maintained. It is recommended to use insulation materials to isolate the heat source, and the overall temperature should not exceed 180°C. When installing this sensor, different mounting directions (e.g. bevel, horizontal, etc.) may also improve the overheating condition of the sensor.
Allowable load pressure: 120% of span (500% for 1MPa, 1000% for 0.5MPa)
On-line coincidence rate % (1000% for 1MPa, 2000% for 0.5MPa)
Optional specifications
Temperature sensor type: Thermocouple K, J (non-grounded Class2)
Temperature measurement part: pressure measurement diaphragm surface measurement 2mm
Maximum operating temperature: 550°C (Type K thermocouple), 450°C (Type J thermocouple)
If you are interested in our RKC resin pressure sensor CZ-200P film using the maximum temperature: 400°C, please call our staff, looking forward to your call~
|
More on that
|
Japan Rika RKC CH902 CH series thermostat
Product Introduction:
Japan RIKA RKC model CH902 products, CH series thermostat, using a large LED with good vision, a cost-effective thermostat.
Brand: RKC
Origin: Japan
Product Name: Temperature Controller
...
|
|
Japan RKC thermostat CD701 FK02 -M*AN-NN weighs about 0.35Kg
Product Introduction:
This is a new type of temperature controller that enables high-precision control at the most reasonable price. Adopt large LED display, suitable for long-distance reading data, easy to monitor temperature status, standard models have the latest self-correction function, can automatically correct PID constant...
|
|
Japan Physicochemical RKC Intelligent Temperature Controller cd901 accuracy ±0.3%
The intelligent temperature controller RRC-CD901 adopts switching power supply and surface mounting technology, which is compact and reliable.
Product Features:
Instrument Inputs:
Thermocouple (TC) K, J, E, T, R, SB, U, L, N, PL2, W5Re/...
|
|
Japan RIKA RKC temperature control meter r400 accuracy is 0.2% level
Product parameters
Customization: No
Brand: RKC/Physicochemical
Model: RD400
Control Type: Temperature
Control Mode: Intelligent Temperature Control Regulator
Measurement object: temperature
Temperature range: 0-400°C
Temperature measurement error ...
|
|
RKC thermostat RH400WD04-V8*AN Pt100, JPt100
Main features
Adjustable Control Responsiveness (POST Fine-Tuning Function)
The responsiveness of the PID control characteristics calculated by the automatic calculation (AT) can be easily adjusted through the POST fine-tuning function. And you can choose from 6 levels of POST fine-tuning function to choose the ...
|
|
Japan physical and chemical RKC temperature controller RD400DK01-MM3*NN5N/AN
Product Introduction
Digital Display Controllers (Temperature Controllers)
RD Series (RD100 / RD400 / RD500 / RD700 / RD900)
Measurement accuracy: ±0.2% of displayed value
Sampling cycle: 0.25 seconds
11-segment LCD display
Dedicated Loader...
|
|
RKC Resin Pressure Converter PCT-300 DC4 – 20mA
Main features
Connect controllers, displays, and recorders
The signal of the resin pressure sensor is converted into an analog output that can be connected to a controller, display and recorder.
Up to 4 points of analog output
Up to 4 points of analog output are possible
DC0 ...
|
|
Japan RIKA RKC COM-KG USB communication converter
Product Description:
Japan RIKA RKC COM-KG USB communication converter, this converter is used to connect with RKC production controllers, displays for RKC dedicated communication or RS-485/422A serial communication and convert to USB connector and computer connection. For USB & RKC...
|
|
RKC Communication Converter COM-KG Connection: USB cable with Mini-B connector
Main features
COM-KG
USB communication converter
Converter for dedicated communication between USB and RKC, or between USB and RS-485/422A serial communication.
Supported OS: Windows 7, Windows 10, Windows 11
Support models: ...
|
|
Japan RIKA RKC LE110 level sensor/back pressure level gauge
Product Description:
Japan Rikaku RKC LE110 Level Sensor/Back-pressure Level Gauge can measure the liquid level with a single conduit, supply inert gas to the conduit installed in the tank, and measure the liquid level by using the back pressure that occurs in the conduit corresponding to the liquid level. LE110 ...
|
|
RKC thermostat REX-P24MK22-M*N Pt100, JPt100
Main features
The small body (48mm) can be equipped with three temperature control modes as standard: program control, time control, and fixed value control
3 different control modes are available to choose from, corresponding to different control needs.
Choose the corresponding mode according to different needs to make the operation easier ...
|
|
RKC Digital Display AE500 DC0 - 5V, DC1 - 5V
Main features
Large, bright display
Large LED display with excellent visibility from soft spots.
Up to 4 points of alarm function (optional)
The upper limit input alarm value and the lower input alarm value can be assigned to 4 outputs.
※ ...
|
|
Japan RIKA RKC CB400 100-240V AC thermostat CB series
Product Introduction:
Japan RIKA RKC model CB400 100-240V AC thermostat, belongs to the CB series, the series of thermostats use large LEDs with good vision, equipped with discriminant control status type self-correction function, and the main color is prepared with white tone and black ...
|
|
Japan physical and chemical RKC CB700 100-240VAC NO.D2L24145 thermostat
Product Introduction:
Japan physical and chemical RKC, model CB700 100-240VAC NO.D2L24145 thermostat, belongs to the CB series, the thermostat of this series uses a large LED with good vision, equipped with a discriminant control state type self-correction function, and the main color is equipped with ...
|
|
RKC thermostat SA100FK06-MM-3*GN-NN/Y 250Ω external resistor
Main features
FM compliant temperature high/low limit controller
Limit the controller's actions
When the temperature controller detects an abnormal increase in temperature, such as a malfunction of the temperature control device, the limiting controller outputs a signal (relay contact output). Should...
|
|
Japan physical and chemical RKC RH900FK02-M*GN-NN 96*96mm thermostat
RH Series Digital Display Controller [ Temperature Controller ] Plug-in structure with good maintenance performance; At the same time, the product depth has been reduced by 40% compared to the original model (CD series). Yes the new standard temperature controller.
Slim 60mm deep (RD100: 63mm) ...
|
|
Japan RIKA RKC PG500 resin pressure sensor
Product Introduction:
Japan Rika RKC, model PG500, this model is a resin pressure sensor (a replacement for REX-PG410), which uses a large high-brightness LED display to achieve clear visibility from a distance; It is also equipped with digital inputs, modular ...
|
|
RKC thermostat CD901FK14-MM*AN-NN 1a contact output
Main features
Equipped with a self-tuning function of the judgment control state type
When the control state is judged to be disordered, the PID parameters are automatically adjusted
Loaded with auto-tuning function
Can be installed in close proximity
It can be installed in close contact, ** using the control panel or operating ...
|
|
Japan PHYSICAL AND CHEMICAL RKC REX-CD901FK02-M*GN-NN thermostat weighs about 340g
Product Introduction:
Japan physical and chemical RKC, the model number REX-CD901FK02-M*GN-NN is a series of temperature controllers that use a large LED screen with good visual performance and are equipped with a discriminant control status type self-correction function.
Brand: RKC
Origin...
|
|
Japan RIKA RKC temperature controller MA900 / MA901 mass: about 560g
Introduction: Japan physical and chemical RKC temperature controller MA900 / MA901 mass: about 560g, current output: DC 0-20mA, DC 4-20mA, provide multi-storage area, contact input and output, communication and other rich functions.
peculiarity
With 1 96mm square can achieve a maximum of 8CH...
|
|
Contact
working hours
