Panasonic amplifiers have built-in ultra-thin photoelectric sensors EX-13SA-PN

Panasonic amplifier built-in ultra-thin photoelectric sensor EX-13SA-PN, current consumption projector: 10 mA or less, light receiver: 10 mA or less, reaction time 0.5 ms or less
Panasonic amplifiers have built-in ultra-thin photoelectric sensors EX-13SA-PN

Panasonic amplifiers have built-in ultra-thin photoelectric sensors EX-13SA-PN

project	content
Order product number	EX-13SA-PN
Model	EX-13SA-PN
Detection distance	500mm
Minimal detection of objects	φ1.0mm opaque body
Deviation ( Hysteresis )	-
Repeatability (perpendicular to the detection axis)	0.05mm or less
Supply voltage	12~24V DC±10% pulsation P-P10% or less
Current consumption	Projector: 10mA or less
Current consumption	Light receiver: 10mA or less
output	PNP open-collector transistors
	・Maximum outflow current: 50mA
	・Applied voltage: 30V DC or less (between output and +V)
	・Residual voltage: 2 V or less (outflow current 50 mA), 1 V or less (outflow current 16 mA)
Output: Short-circuit protection	Equipped with
Reaction time	0.5ms or less
Working status indicator	Orange LED (lights up when ON is output)
Incoming light indicator	-
Stability indicator	Green LED (lights up when light is stable and not in light)
Environmental resistance: Protective structure	IP67(IEC)
Environmental resistance: The ambient temperature at which it is used	-25~+55°C (note that condensation and freezing are not allowed), storage: -30~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, when storing: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: The illumination of the light-receiving surface is 3,000 R or less
Environmental resistance: Withstand voltage	AC1,000V for 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance	A high-impedance meter based on 250 VDC between all power supply terminals and housings of 20 MΩ or more
Environmental resistance: Vibration resistance	Frequency: 10~500Hz, double amplitude: 3mm(MAX.20G), 2 hours each in the X, Y and Z directions
Environmental resistance: impact resistance	Endurance 500 m/s2 (approx. 50 G) 3 times in each direction of XYZ
Projectors	Red LED (Emission peak wavelength: 680nm, modulated type)
Material	Shell: Polyaryl ester
Material	Lens: Polyaryl ester
cable	0.1mm2 3-core (beamer: 2-core) rubber cable, 2m long
Cable extension	The total length of the cable of 0.3 mm2 or more can be extended to 50 m (1 emitter and 1 light receiver)
weight	Body weight: Approximately 20 g of light emitters and light receivers each
weight	Package weight: about 50g
annex	Mounting screws: 1 set
Exterior Dimension Drawing

Panasonic amplifier built-in ultra-thin photoelectric sensor EX-13SA-PN, current consumption projector: 10 mA or less, light receiver: 10 mA or less, reaction time 0.5 ms or less. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic amplifiers have built-in ultra-thin photoelectric sensors EX-13SA-PN

Sections viewed

Contact

working hours