EATON UPS Power Supply Online Rack Type C2KR Voltage (110~300)VAC

C2KR Product Introduction: In order to prevent users from letting the UPS work in BYPASS MODE (bypass mode) without turning on the use, resulting in mains power interruption and abnormal shutdown of the UPS and equipment. Input normal mains, no bypass output by default. It must be turned on to have normal inverter output. However, the configuration can be changed to "Listed Electric Bypass Output" through WinPower2000 software.
Eaton UPS:
EATON UPS Power Supply Online Rack Type C2KR Voltage (110~300)VAC

EATON UPS Power Supply Online Rack Type C2KR Voltage (110~300)VAC

Technical parameters

Sine wave output

Whether in mains mode or battery mode, it can output a sine wave power supply with low distortion, providing the best power supply for the user's load equipment.

Zero changeover time

When the mains power is cut off or reinstated, there is no conversion time for the UPS to switch between the mains mode and the battery mode, which effectively ensures the reliability of the load operation.

Enter the zero-fire detection function

It has the function of reverse connection detection of zero live wire. to avoid the reverse connection of the zero live line of the UPS mains input.

User-friendly bypass output

In order to prevent users from making the UPS work in BYPASS MODE (bypass mode) without turning on the mains power, the UPS and the device will be shut down abnormally. Input normal mains, no bypass output by default. It must be turned on to have normal inverter output. However, the configuration can be changed to "Listed Electric Bypass Output" through WinPower2000 software.

TVSS function

That is, TRANSIENT VOLTAGE SURGE SUPPRESS. It is used on Rack UPS for conversion protection functions such as FAX, TELEPHONE, MODEM, and network.

Enter power corrections

Rack UPS has the input power factor correction function, which can reach more than 0.95 under full load, so that the user's power grid environment will not be polluted.

DC start

In the state of mains power failure, if you need to use UPS to start the computer or other load equipment, the UPS can directly use the battery for DC power on, making the use of UPS more convenient and reliable.

Bypass protection

The bypass power supply function greatly strengthens the emergency handling ability of UPS, and at the same time, when the user's load equipment has special requirements for the power supply, such as the voltage can not be too high, UPS provides bypass power supply voltage too high protection, so that the user's load equipment is free from high voltage danger.

Auto-start function

When the mains power is abnormal, enter the battery mode to power supply until the cut-off, the Rack UPS will shut down, and when the mains power returns to normal, the Rack UPS will automatically start to power on and restore normal power supply, without the need for users to turn on the power one by one.

Long-lasting power supply design

Rack UPS offers a comprehensive range of long-life machines for users to choose from. Equipped with a suitable battery pack, the discharge time can reach about 8 hours to meet the requirements of different power grid environments.

Powerful charging capacity of long-lasting machine

In addition to the extended discharge time, the Rack UPS long-lasting machine also has a strong battery recharge ability, which can provide an initial charging current of about 4-9A.

Self-check function

The Rack UPS can be used to simulate a power outage and enter battery mode to power the system, which can be performed at any time through the self-test button on the panel, or in conjunction with the monitoring software, on a regular or irregular basis.

Strong anti-interference

For electromagnetic interference and radio frequency interference, Rack UPS is designed in accordance with the international standard EN50091 - 2 and IEC61000-4 series standards, which effectively improves the safety and reliability of UPS.

Can be used with a generator

The wide input voltage and frequency range allows the Rack UPS to be used with major brands of generators for a longer period of time, while effectively removing the bad power generated by the generator, providing a pure, safe and stable power supply for the load.

Inductive loads can be connected

The Rack UPS can be connected to inductive loads (pf = 0.8).

Free download of WinPower2000 monitoring software from the website

In order to make the user's management of UPS more convenient and effective, WinPower2000 network version of monitoring software can be provided free of charge to achieve intelligent management.

Equipped with Intelligent Slot

The Rack UPS is equipped with an Intelligent Slot, which allows users to purchase an AS400 card (dry contact card) to provide IBM AS400 standard communication signals, and users can use the AS400 interface for remote display, including audible alarm and light display. Or purchase WebPower intelligent monitoring card for global management through the Internet, or through SNMP network management to achieve centralized monitoring and remote monitoring and other functions.

Equipped with a standard battery pack

The Rack UPS is configured with a standard battery pack of the same size as the host (for customers to choose). In addition to the C2KR, C3KR and C6KR standard machines are required to be equipped with one set of standard battery packs, the C1KRS and C6KRS long-lasting machines are also required to be equipped with more than 2 sets of standard battery packs, and the C2KRS and C3KRS long-acting machines are required to be equipped with more than 3 sets of standard battery packs. The batteries in the standard battery pack are made of high-quality batteries to ensure the safety and reliability of UPS with good battery quality.

Model

C1KR

C1KRS

C2KR

C2KRS

C3KR

C3KRS

C6KR

C6KRS

C10KR

C10KRS

Rated capacity

1kVA

2kVA

3kVA

6kVA

10kVA

input

voltage

(110～300)VAC

(176～276)VAC

frequency

(40～70)Hz

(46～54/56～64)Hz

Causes

>0.99

battery

External battery nominal voltage

—

36VDC

72VDC

96VDC

192VDC

Battery form

Maintenance-free lead-acid batteries

Number of batteries

3PCS

—

output

voltage

220(1±1％)VAC

frequency

Synchronization with input (mains mode)

50 (1±0.2%)Hz (battery mode)

Overload capacity

100%-110%: only warning tones;
110%-130%: automatically turn off after 1 minute, or switch to bypass mode when the input is normal;
>130%: Immediately turn off, or switch to bypass mode when input is normal.

105%-125%，1min; 125%-135%，30S; 〉135%，0.5S

Output waveform

Pure sine wave

Output form

receptacle

Terminal blocks

Conversion time

Zero disruption

display screen

LCD display

LED/LCD display optional

Alarm sounds

The battery is discharged

When the input voltage is powered off, it is called every 4 seconds; When the battery is about to run out, it calls every second

The UPS is abnormal

Long beep

Auto-restart

After the battery is shut down, it can be automatically restarted when the mains power returns to normal

Communication interface

RS-232

Intelligent monitoring functions such as abnormal mains power, power failure, battery capacity, UPS status indication, etc

Options

SNMP card, AS400 card, USB communication

Operating environment

temperature

0℃～40℃

humidity

20％～90％

The overall dimensions of the host (W×D×H) mm

482.6x450x88

482.6x600x130

Exterior dimensions of the battery pack (W×D×H) mm

482.6x450x88

482.6x600x130

The weight of the main engine (net weight) kg

16.3

9.1

10.3

11.5

11.2

12.3

18.3

18.5

19.2

19.5

The above is the EATON/Eaton UPS power supply online rack type C2KRThe product brief is:In order to prevent users from making the UPS work in BYPASS MODE (bypass mode) without turning on the mains power, the UPS and the device will be shut down abnormally. Input normal mains, no bypass output by default. It must be turned on to have normal inverter output. However, the configuration can be changed to "Listed Electric Bypass Output" through WinPower2000 software.

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.

EATON UPS Power Supply Online Rack Type C2KR Voltage (110~300)VAC

Sections viewed

Contact

working hours