Panasonic CMOS miniature laser displacement sensor HG-C1100-P

Panasonic's CMOS miniature laser displacement sensor HG-C1100-P has a 100mm type with a repeatability of 70 μm, a PNP output, and a beam diameter of about ø120 μm
Panasonic CMOS miniature laser displacement sensor HG-C1100-P

Panasonic CMOS miniature laser displacement sensor HG-C1100-P

project	content
Order product number	HG-C1100-P
Model	HG-C1100-P
Fit the specifications	EMC is compliant with directives and FDA regulations
Measure the distance to the center	100mm
Measuring range	±35mm
Repeatability	70μm
linearity	±0.1% F.S.
Temperature characteristics	0.03% F.S./℃
light source	Red Diode Laser Class 2 (JIS/IEC/GB)/Class II (FDA) (Note)
	Maximum output: 1mW
	Peak wavelength of projection: 655nm
	Note: Comply with FDA rules in accordance with Laser Notice No. 50 of the FDA Regulations.
Beam diameter	Approx. ø 120 μm
Beam diameter	Note: Measure the magnitude of the center distance. Defined as 1/e2 (about 13.5%) of the central light intensity. If there is a light leak outside the defined area and there is a strong reflection around the detection point that is higher than the detection point itself, the measurement results may be affected.
Supply voltage	12~24V DC±10% pulsation P-P10% or less
Current consumption	40mA or less (at 24V DC)
	65mA or less (at 12 V DC)
	Note: Specifications will be changed from June 2016 onwards. Products manufactured before May 2016: 40 mA or less (at 24 V DC), 60 mA or less (12 VDC)
Control the output	PNP open-collector transistors
	・Maximum source current: 50mA
	・Applied voltage: 30V DC or less (control output -+V)
	・Residual voltage: 1.5 V or less (at 50 mA outflow current)
	・Leakage current: 0.1mA or less
Control Output: Output action	ON when the light is in/ON when the light is not in the light can be switched
Control Output: Short Circuit Protection	Equipped (auto-recovery)
Analog Output: Analog voltage output	・Output range: 0~5V (+5.2V during alarm)
Analog Output: Analog voltage output	・Output impedance: 100Ω
Analog Output: Analog current output	・Output range: 4~20mA (0mA in case of alarm)
	・Output impedance: 300Ω
	Note: Since June 2016, an analog current output function has been added.
Reaction time	1.5ms/5ms/10ms switchable
External inputs	PNP has no contact input
	・Enter the conditions
	Invalid: 0~+0.6V DC or open circuit
	Valid: +4~+V DC
	・ Input impedance: Approx. 10kΩ
Defacement	2
Use levels	2,000m or less
Environmental resistance: Protective structure	IP67(IEC)
Environmental resistance: The ambient temperature at which it is used	-10~+45°C (note that condensation and freezing are not allowed), 20~+60°C when storing
Environmental resistance: Ambient humidity is used	35~85%RH, when stored: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: 3,000 lx or less on the light-receiving surface
Environmental resistance: Vibration resistance	Endurance 10~55Hz (cycle 1 minute) Double amplitude 1.5mm XYZ in all directions for 2 hours
Environmental resistance: impact resistance	Endurance: 500 m/s2 (approx. 50 G) 3 times in each direction of XYZ
cable	0.2mm2 5-core composite cable, 2m long
Cable extension	Cables of 0.3mm2 or more can be extended up to 10m in total length
Material	Body shell: die-cast aluminum
Material	Front cover: Acrylic
weight	Weight: Approx. 35g (without cable), Approx. 85g (including cable)

Panasonic's CMOS miniature laser displacement sensor HG-C1100-P has a 100mm type with a repeatability of 70 μm, a PNP output, and a beam diameter of about ø120 μm. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic CMOS miniature laser displacement sensor HG-C1100-P

Sections viewed

Contact

working hours