Advantech's APAX-5000 series (including APAX-5620) uses an open development architecture and provides embedded KW Multiprog Softlogic software with optional HMI/SCADA to integrate control, information processing, and networking functions into a single control system. Advantech's PAC solution uses KW Multiprog and ProConOS as development tools. Users can easily choose the most suitable SoftLogic software. The APAX-5000 series has two dedicated controllers to handle different tasks, giving it an edge over other PAC products on the market.
Advantech APAX-5620KW controller
PAC with Miracle XScale CPU, can, kW
The APAX-5620kw is a risc-based controller with an Intel XScale PXA270 CP, it also has two CAN bus interfaces that support the CANOpen stack (DS301 and 302), two RS-485 ports that allow it to connect to remote I/O devices, and is capable of supporting up to 32 APAX I/O modules. APAX-5620KW supports Microsoft Visual Studio and . .NET programming language, thus allowing PC-based users to easily develop their own applications. It is also compatible with the IEC-61131-3-based multi-process KW language, allowing users to download change functions and time deterministic support. With these outstanding features, the APAX-5620 is a highly cost-effective solution for a wide range of applications such as steel production monitoring, textile machinery, factory automation, tunnels, and highways.
Powered by Intel XScale®PXA270 520 MHz processor
64 MB of SDRAM, 32 MB of Flash
Expand I/O by connecting APAX-5000 I/O modules
2 x 10/100 Mbps RJ-45 LAN ports and 2 x RS-485 isolated ports
2 independent CAN bus interfaces with support for the CANOpen stack
1 x VGA display port and 1 x USB port
1 CompactFlash slot for data storage
Windows CE, C/ c ， . .NET platform
Advantech controller APAX-5580
Intel®Core™i7/i3/Celeron DIN-Rail IPC w/ 2 x GbE, 2 x mPCIe, VGA
Advantech's APAX-5580 is a high-performance new device networking and information integrated control platform, which supports Intel Core i7 / i3 / Celeron CPU processors, 4GB DDR3 memory, two GbE ports, one RS-232/485/422 port, one mSATA connector, two SD slots, two mini PCIe slots, redundant power input and UPS power supply, 10-year life RTC battery, and flexible I/ through different interfaces. o Data acquisition, real-time I/O control and network communication make it fully suitable for all kinds of complex and harsh industrial environments.
10 years life RTC battery
One-button system recovery
Fault-protected RS-485 transceiver with extended common-mode range
LAN redundancy (cooperative)
Enclosure grounding protection
mPCIe 3G/GPS/GPRS/Wi-Fi communication
Fieldbus protocols are supported through iDoor technology
Compact, fanless design
Redundant power input and UPS power supply
2×GbE, 4× USB 2.0/3.0, 1×RS-232/422/485, 1×VGA, audio
4th Gen Intel ®™ Core i7/i3/Celeron 1.7 GHz processor and 4 GB/8 GB DDR3L memory
Advantech Model: APAX-5580CDS
High-performance soft logic pc controller, licensed by CODESYS
CODESYS V3.5 controls RTE
Advantech's APAX-5580 is a powerful IPC controller powered by Intel Core i7/i3/Celeron processors. It is an ideal open control platform in combination with APAX I/O modules, with flexible I/O expansion, real-time I/O control, network functions through various interfaces, and support for dual power inputs to achieve power system robustness. It also has a built-in standard mini PCI express wireless communication interface and Advantech's iDoor technology. The APAX-5580 is the best solution for data gateway, data concentrator and data server applications, and its seamless integration with I/O enables cost savings and automation projects. |
More on that
|
How to reinstall the system of Advantech's industrial computer?
Take Advantech IPC 610L as an example of how to install win7 system
To install the image win7, you need to make the following preparations:
(1) Make a USB flash drive boot disk first; (2) Download a win7 system image file, and then copy it to the USB flash drive boot disk;
Step 1: Combine the production of ...
|
|
Advantech's FPM series of industrial panel PCs touchscreen HMIs
Advantech's industrial-grade flat panel display FPM series has a wide operating temperature range of -20°C~ 60°C, making it suitable for harsh industrial environments. The FPM series features an excellent industrial-grade LCD display for a more realistic display. The industrial grade flat panel display FPM series is designed for factory ...
|
|
Advantech Tablet - What is the difference between an industrial tablet PC and an ordinary computer?
First, the internal components used are different. Due to the complex environment, industrial tablet PCs have higher requirements for products, such as stability, anti-interference, waterproof, shockproof and other functions; Ordinary tablets are mostly used in the home environment, pursuing timeliness, taking market positioning as the standard, and the internal components only need to ...
|
|
Advantech IPC - What should be paid attention to in the use of IPC
1. Although the conventional requirements of the industrial computer are -20 ° - 70 °, but this is only the maximum withstand limit, at extremely high or very low temperature, no matter how good the quality of the industrial computer will be damaged quickly, so in the environment where the industrial computer is used, the best temperature range is 0-50 degrees ...
|
|
Advantech 610L IPC power-off setup steps after power-off
1. Select Power Management Setup and then Power Again, which determines the state of the system power supply when the power supply is restored after an unexpected power outage at power-on. The setting values are: Power Off (Keep the system in the shutdown state ...
|
|
Steps to set up the gateway for Advantech switch EKI-2528
Step 1: Configure VLAN For the management IP address of the switch on the network, it is recommended to divide a dedicated VLAN, such as VLAN 1000, to isolate it from the VLAN of the user terminal.
Command vlan 1000
step 2: Configure VLANIF interface address Assume the ...
|
|
Advantech's IPC USB flash drive boot method
1. Insert the boot disk.
2. Reboot the computer, press and hold the Delete key when starting, enter the Bios.3, enter the Advanced bios Features item.
3. Go to the Advanced BIOS Features item.
4. Move the cursor to First boot Depic...
|
|
How to wire Advantech's USB4761 acquisition module?
1. Plug the USB port of the module into the USB port of the computer.
2. Connect the digital input interface and digital output interface on the module to the equipment for demand collection and control, such as sensors, motors, etc. When wiring, it is necessary to connect according to the pin number and function.
3. ...
|
|
Advantech Industrial Computer - Common Faults and Solutions of Industrial Computer (6-10)
6. The mouse and keyboard cannot be used after booting
1. Check whether the keypad lock is locked and release the keypad lock;
2. If not, check whether the connection between the motherboard and the bottom plate and the keyboard and mouse are correct;
3. Check whether there is a keyboard and mouse two-way adapter, ...
|
|
Advantech Industrial Control - Why can't an industrial computer be used as an ordinary computer?
Industrial control computer (IPC) is referred to as industrial computer, which has important computer attributes and characteristics, such as computer motherboard, CPU, hard disk, memory, peripherals and interfaces, and operating system, control network and protocol, computing power, friend...
|
|
Advantech's edge computing is among the top 20 companies
Edge Measurement Street announced the overall list of "2020 China's Top 20 Edge Computing Companies", and Advantech High-tech was selected for the overall list with its years of deep cultivation in the edge measurement industry, independent innovation and outstanding brand advantages.
With the advent of 5G, the Internet of Things ...
|
|
Advantech's Common Fault Solutions(18-21)
18. ATX power supply cannot be completely shut down:
1. Whether to turn on the ACPI option under BIOS;
2. Whether to turn on the ACPI option when installing the system or whether the system supports advanced power management;
3. Some motherboards must be connected to the GND pin when connecting to the ATX wiring.
|
|
Advantech motherboard - how to set up the motherboard BIOS fan
1. Enter POWER under BIOS, set CPU FAN Mode Setting to AUTO, and restart. Set the fan to auto mode first, and check the speed and sound after turning it on, if it is acceptable, it is best to use it in this mode. If it doesn't work, then go ahead.
2.CPU FAN Mode ...
|
|
How to reduce the noise of Advantech's IPC fan
What is the form of Advantech IPC fan noise?
1. Wind caused by CPU and host fan inhalation
2. The CPU fan and the host hinge are not smooth, and the friction with the fan produces noise.
Advantech's IPC: Neither can be implemented with software settings. First open the case lid and make sure ...
|
|
Advantech's industrial touch screen improves the efficiency of molecular diagnostic testing for the novel coronavirus
Project Background
According to the United States Food and Drug Administration, there are two main types of COVID-19 tests – nucleic acid amplification tests (NAATs) and antigen tests. Both types of tests can show if a person is currently infected with SARS-CoV-2 (the novel coronavirus) ...
|
|
Advantech IPC - How to reinstall the system with a USB flash drive on the IPC?
1. Download the U disk installation master U disk boot disk maker and make it into a boot disk.
2. Download the system image file and put it in the "GHO" folder of the USB flash drive.
3. Restart the computer and insert the USB flash drive into the USB port of the computer.
4. Press the power ...
|
|
Advantech IPC-510 computer boot black screen problem solution
1. Check the power connection: Make sure the power cord is properly connected to the power outlet and the power switch is on. Check the power cord for loose or damaged conditions.
2. Check the monitor connection: Make sure the monitor is properly connected to the computer's display interface (such as VGA, HDMI, D...).
|
|
Advantech introduces the AIR-020 series of edge inference platforms
Advantech's AIR-020 series edge inference platform is an ultra-compact edge intelligence appliance powered by an edge AI system powered by NVIDIA Jetson series core modules. The AIR-020 series has a small size of only 139 x 110 x 44.5 mm, which is available through NVIDIA Jetson ...
|
|
Advantech IPC - The components and introduction of IPC
1. Motherboard: The core of the industrial computer, which is composed of central processing unit, memory and I/O interface. The function of the motherboard is to carry out the necessary numerical calculation, logical judgment and data processing of the collected real-time information according to the predetermined program, select the control strategy in time and output the results to the industry.
|
|
Advantech motherboard power-on auto-start setup steps
1. Power on and press the DEL key to enter the BIOS
2. Move right to chipset
3. Select pch-io configuration Enter
4. Scroll down to restore ac power loss (or state after g3) and press enter
5. Select Power On (or S0 State) Enter
...
|
|
Contact
working hours
