Germany Siemens/Siemens 3SK1111-1AB30 safety relay single channel

3SK1111-1AB30 Introduction: Siemens Safety Relays, 3SK1 Series Single Channel, 24 V AC/DC Power Supply

Germany Siemens/Siemens 3SK1111-1AB30 picture display

Model features introduced

SIRIUS3SK1 standard safety relays
The safety relays of the standard series can be configured as stand-alone devices or as a scalable solution with conventional cabling technology. The focus of the standard series is as follows: individual devices for simple safety applications, with output-side expansion via expansion units and external wiring. Unable to expand on the input side.

apply

Emergency closing/emergency stop monitoring of protective doors, non-contact protective devices with electromechanical position switches, solid-state position switches or solenoid switches, such as lamp arrays/light barriers or laser scanners
3SK1111 Standard Basic Device Transient (with Relay Output)
The SIRIUS3SK1111 is a two-channel safety relay for emergency shutdown and emergency stop equipment, in accordance with EN60204-1. The unit is equipped with a positive drive relay and monitors itself during each on/off cycle. This safety relay has three enabling circuits (safety-related circuits) as normally open circuits and signal circuits (non-safety-related circuits, normally closed contacts). In the front of the 3SK1111 base unit, there is a slide switch for function settings; and two LEDs to show the working status.

2 sensor inputs (channels 1 and 2)1 input for feedback circuit and start button3 enable circuits (safety-related circuits, normally open contacts)1 signal circuit (non-safety-related circuits, normally closed contacts)2 LEDs for displaying working statusSlide switches for function settingsSingle or dual channel connection for sensor crossover circuits between sensor channels 1 and 2 Detection housing width 22.5mm detachable terminal block
3SK1112 Standard Base Device Transient (with Solid State Output)
SIRIUS3SK1112 safety relays have two safety-correlated solid-state safety outputs and a non-safety-dependent signal circuit. On the front of the safety relay there is a 4-way DIP switch for function setting, as well as 4 LEDs for status and function display. The set/reset button is used for the load function setting and restarting the unit (reset). During the test run, the 3SK1112 standard basic device passed the self-test. This checks that the internal electronics and firmware are working correctly. During operation, all internal safety-critical components of the monitoring circuit are cycled for failures.

4 DIP switches for function settings (parameterization) set/reset buttons, 4 LEDs for status and function displays, 2 sensor inputs (channels 1 and 2), 1 input (cascade circuit), 1 input (start button circuit), 1 input (feedback circuit), 2 test outputs, 2 safety solid state outputs, 1 solid state signal circuit, housing width 22.5mm, detachable terminal block
The standard 3SK1 safety relay can be used in emergency shutdown/emergency stop equipment to comply with ISO13850 and in safety circuits to comply with VDE0113-1 and/or DINEN60204-1. Depending on the external circuit, it implements SILCL3 and conforms to IEC62061; SIL3, IEC61508 compliant; PLe (Class 4), in accordance with ISO13849-1.

Model parameters are introduced

attribute	numeric value
Supply voltage	24V AC/DC
Number of channels	1
Security category ISO13849-1	4
SILIEC61508	3
PLISO13849-1	E
Safety contacts	4
range	SIRIUS
Reset method	Automatic, monitoring
Connector type	screw
series	3SK1
depth	121.7mm
length	100mm
width	22.5mm

The above content is about the product introduction of Germany Siemens / Siemens 3SK1111-1AB30, if you have any questions or product needs, welcome to communicate with our customer service, all products of 76 Technology are genuine, fake one pays ten, are manufacturers or selected first-class agents source, the quotation is real, the price is beautiful.

Survive by quality, develop by reputation, eternity by service, give us a chance, and give you a surprise.

Germany Siemens/Siemens 3SK1111-1AB30 safety relay single channel

Sections viewed

Contact

working hours