FR-D740-080SC-EC Japan Mitsubishi/Mitsubishi Electric inverter

FR-D740-080SC-EC Introduction: Mitsubishi Inverter, FR-D740 Series, 3.7 kW, 400 V AC, IP20, 0.2 400Hz, 8 A • Simple wiring, integrated spring clip quick connect control cable and power cord ensure simple cabling and reliability. • Simple parameterization software FR-configurator makes functions such as graphical machine analysis easy to use to optimize the drive system. • Integrated digital dial gives the user direct access to all important parameters.

Mitsubishi/Mitsubishi Electric _FR-D740-080SC-EC

Mitsubishi/Mitsubishi Electric FR-D740-080SC-EC

Model features introduced

What is the D740-SC three-phase inverter driver D740-SC series?
Simple cabling with integrated spring clip quick-connect control cable and power cable ensures simple cabling and reliability. The simple parameterization software FR-configurator makes functions such as graphical machine analysis easy to use to optimize the drive system. The integrated digital dial gives the user direct access to all important parameters. The integrated four-digit LED display displays the current operating value and alarm messages. This particular model has a second transistor output, which is a well-selectable source logic safety input instead of well-defined logic. Connects directly to the PLC instead of a safety relay. Features sensorless vector control for excellent speed and torque performance. Serial interface (RS485) is standard. Emergency safety stop input in accordance with EN61800-5-2, please refer to the documentation included with this product page for more details on this series of compliance. Maximum short-term overload capacity: 200% in 0.5 seconds. The D740-SC series automatically restarts after a power failure. Improved braking capability by direct connection of an external braking resistor.
Typical Applications
The FR-D700 drive drive is easy to use and is typically used in standard applications, but can also be used in simple or precision applications. These types of VDFs are commonly used in machining tools, doors and door drives, power feeds, and conveyor drives. Three-phase drive drives are suitable for a wide range of drive applications, from high-torque machine control applications to simple fan and pump loads.
Can I link a drive to the network? The FR-700 comes standard with a serial interface (RS485), meaning that this VDF allows communication with PLCs and PCs, and the series also supports ModBusRTU. This model complies with international standards such as CE, UL, cUL, GOST and RoHS, so we guarantee that it can be used worldwide. What is the working life of the drive drive? The service life of the inverter drive is more than ten years. The reason for this is high-performance heat-resistant capacitors, cooling fans with sealed bearings and special greases. Any cooling air flow that touches the VFD only touches the heat sink and does not accumulate any dust. The board has a single or double layer of protective coating to protect it from aggressive environments, which is another feature that extends the life of the drive drive. approval
CE, UL, cUL, GOST, RoHSMitsubishi FR-D740-080SC-EC variable speed drive This inverter drives with a rated power of 3.7kW, a supply voltage of 400V AC, and a total length of 128mm, which belongs to the micro drive solution series. Mitsubishi D700 Series This series replaces the commonly used S500 and E500 drive families and is fully compatible with other products in the Mitsubishi "Micro" series, including the FX3UPLC and GT1020 operator interfaces.

Model parameters are introduced

attribute	numeric value
Rated power	3.7kW
phase	3
Supply voltage	400V AC
Current rating	8A
Output frequency	0.2400Hz
Ambient temperature	-10 40°C
Overall width	108mm
Overall length	128mm
Overall depth	165.5mm
control panel	be
Fieldbus communication type	ModBus
Filters are included	not
IP rating	IP20
series	FR-D740

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.

The above is the Japan brand Mitsubishi / Mitsubishi Electric model FR-D740-080SC-EC products, the introduction of this product is: Mitsubishi inverter, FR-D740 series, 3.7 kW, 400 V AC, IP20, 0.2 400Hz, 8 A, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.

FR-D740-080SC-EC Japan Mitsubishi/Mitsubishi Electric inverter

Sections viewed

Contact

working hours