FR-D720S-070SC-EC Introduction: Mitsubishi Inverter, FR-D720S Series, 1.5 kW, 230 V AC, IP20, 0.2 400Hz, 7 The AD700 is an ultra-compact miniature drive solution drive series designed for simple installation and setup • Simple wiring, integrated spring clip quick connect control cable and power cord ensure reliability and simple wiring. The simple parameterization software FR-configurator makes functions such as graphical machine analysis easy to use and thus optimizes the drive system.
Mitsubishi/Mitsubishi Electric _FR-D720S-070SC-EC
Model features introduced
What is D720-SC single-phase inverterWhat is the D720-SC series? The D700 is an ultra-compact drive drive family of micro drive solutions designed for simple installation and set-up, with features and benefits
Simple cabling with integrated spring clip quick-connect control and power cables ensures reliability and simple wiring. The simple parameterization software FR-configurator makes functions such as graphical machine analysis easy to use to optimize the drive system. The integrated digital dial gives the user direct access to all important parameters. An integrated four-digit LED monitor displays current operating values and alarm messages. There is a second transistor output, which is a well-selectable source-logic safety input rather than well-defined logic. Connects directly to the PLC instead of a safety relay. Features sensorless vector control for excellent speed and torque performance. Serial interface (RS485) is standard. Emergency safety stop input in accordance with EN61800-5-2. Maximum short-term overload capacity: 200% in 0.5 seconds. Automatic restart after power failure. Direct connection of an external braking resistor improves stopping power.
Typical Applications
The FR-D700 Inverter Drive (VFD) is easy to use and is typically used in standard applications. These types of VFDs are commonly used in feed and conveyor drives, machining tools, doors, and door drives. Single-phase drive drives are suitable for a wide range of drive applications, from simple fan and pump loads to high torque machine control applications.
Can I install a VFD? Yes, thanks to the ultra-compact size, your VFD can be installed directly side by side. A member of the FR-D700 series, the 1cm thick cooling plate promotes efficient heat dissipation and saves space. What is the working life of the drive drive? The service life of the inverter drive is more than ten years. The reason for this is high-performance heat-resistant capacitors, cooling fans with sealed bearings and special greases. Any cooling air flow that touches the VFD only touches the heat sink, not the electrical components, which means that no dust will accumulate. The board has a single or double layer of protective coating to protect it from aggressive environments, which is another feature that extends the life of the drive drive. approval
CE, UL, cUL, GOST, RoHS This Mitsubishi inverter driver is a single-phase inverter with a power rating of 1.5kW. The power supply voltage is 230V AC. This VFD is an ultra-compact series with an overall length of only 128mm. Due to its small size, the installation process is very simple and easy to handle. Mitsubishi D700 Series This series replaces the commonly used S500 and E500 drive families and is fully compatible with other products in the Mitsubishi "Micro" series, including the FX3UPLC and GT1020 operator interfaces.
Model parameters are introducedattribute | numeric value | Rated power | 1.5kW | phase | 1 | Supply voltage | 230V AC | Current rating | 7A | Output frequency | 0.2400Hz | Ambient temperature | -10 40°C | Overall width | 108mm | Overall length | 128mm | Overall depth | 155mm | control panel | be | Fieldbus communication type | ModBus | Filters are included | not | series | FR-D720S | IP rating | IP20 |
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.
The above is the Japan brand Mitsubishi / Mitsubishi Electric model FR-D720S-070SC-EC products, the introduction of this product is: Mitsubishi inverter, FR-D720S series, 1.5 kW, 230 V AC, IP20, 0.2 400Hz, 7 A, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Mitsubishi inverter FR-A820-5.5K-1 3-phase 200~240V
Introduction: Mitsubishi inverter FR-A820-5.5K-1 built-in braking transistor, the maximum braking torque is 100% torque·2% ED**6 (FR-ABR is 100% torque ·10% ED) when using the option), rated input AC voltage · frequency 3-phase 200-240V 50Hz/60Hz.
...
|
|
Mitsubishi Electric Inverter FR-F800 Series 400V
Introduction: Mitsubishi Electric's FR-F840 series is part of the FR-F800 series, and the pump and fan controls of these VFDs are optimized to provide maximum energy savings. With their power and intelligence, they are the ideal pump and fan solution.
...
|
|
Mitsubishi inverter FR-D720S-0.2K-CHT 1.5KW 7A
Introduction: D700 products are multi-functional, compact products with universal flux vector control mode: in the case of 1HZ, the torque can be increased to 150%, and the floating roller control and triangle wave function can be expanded; With safe stop function: There are two ways to achieve emergency stop: by controlling the MC contactor to cut off the conveyor.
|
|
Mitsubishi/Mitsubishi Electric inverter FR-A842-315K weighs 156Kg
Introduction: FR-A800 series inverter adopts independent design of rectifier inverter (315kW and above), and enhances the system safety function, plus compatible with a variety of mainstream network communication (CC-1ink, SSCNETIII/H, DeviceNet, PROFIBUS-DP and Ethernet, etc.), so that you can easily adapt to the ...
|
|
Mitsubishi Electric Inverter FR-D700 Compact and economical 3-phase 380~480V
Introduction: Mitsubishi inverter FR-D700 series products are multi-functional, compact products. With safe stop function: there are two ways to achieve emergency stop: by controlling the MC contactor to cut off the input power supply or by directly cutting off the inverter module drive loop inside the inverter to comply with European standards ...
|
|
FR-D720S-008SC-EC Japan Mitsubishi/Mitsubishi Electric inverter
FR-D720S-008SC-EC Introduction: Mitsubishi Inverter, FR-D720S Series, 0.1 kW, 230 V AC, IP20, 0.2 400Hz, 800mAD700 is an ultra-compact micro drive solution inverter drive series designed for simple installation and setup • ...
|
|
Mitsubishi/Mitsubishi Electric inverter FR-A842-450K 380-500V
Introduction: FR-A800 series inverter adopts independent design of rectifier inverter (315kW and above), and enhances the system safety function, plus compatible with a variety of mainstream network communication (CC-1ink, SSCNETIII/H, DeviceNet, PROFIBUS-DP and Ethernet, etc.), so that you can easily adapt to the ...
|
|
Mitsubishi Inverter FR-CS84-080-60 3.7KW three-phase
Introduction: The FREQROL-CS80 series is Mitsubishi Electric's latest compact intelligent inverter. It has a variety of functions and is suitable for various purposes, with a small body with a small level, and the volume is 57% of that of the equivalent model of Mitsubishi; Equipped with universal flux vector control and auto-tuning for high-performance ...
|
|
Mitsubishi/Mitsubishi Electric Inverter FR-A820-90K Weight 74Kg
Introduction: FR-A800 series inverter adopts independent design of rectifier inverter (315kW and above), and enhances the system safety function, plus compatible with a variety of mainstream network communication (CC-1ink, SSCNETIII/H, DeviceNet, PROFIBUS-DP and Ethernet, etc.), so that you can easily adapt to the ...
|
|
Mitsubishi inverter FX3u-16MT/ESSAC 220V 50/60Hz
Introduction: Mitsubishi PLC Micro Programmable Controller FX Series Customers can freely choose Mitsubishi Electric Micro Programmable Controller FX Series according to their respective needs. The FX series can be used in a wide range of applications to control a wide range of changes. It is more convenient to shorten the development by setting a small amount of ...
|
|
FR-E720S-015SC-EC Japan Mitsubishi/Mitsubishi Electric inverter
FR-E720S-015SC-EC Introduction: Mitsubishi Inverter, FR-E720S Series, 0.2 kW, 230 V ac, IP20, 0.2 400Hz, 1.5 AFR – The E700 SC inverter series belongs to a family of compact drive solutions designed to be the most ...
|
|
Mitsubishi Inverter FR-E720-5.5K Three-phase 220V 35W
Introduction: Mitsubishi inverter FR-E720-5.5K has a variety of flux vector control methods: in the case of 0.5Hz, the use of advanced flux vector control mode can increase the torque to 200% (less than 3.7KW).
Product Details
...
|
|
Mitsubishi/Mitsubishi Electric Inverter FR-L740-55K-CHT 55KW
Introduction: Mitsubishi inverter FR-L740-55K-CHT is an inverter of L700 series, 55KW power, 3-phase 400V.
Product parameters
[Applicable motor capacity (kW)] SND: 55 ND: 45
【Output】
...
|
|
Mitsubishi General Inverter FR-F840-00770 37KW AC400V
Introduction: The newly developed magnetic control of the FR-F800 series improves the efficiency of the motor while providing greater starting torque while carrying out energy-saving drive. Through the offline self-adjustment function, not only Mitsubishi's permanent magnet synchronous motor can be driven, but also the motors of other manufacturers can be magnetically controlled through automatic tuning, ...
|
|
Mitsubishi Electric General Purpose Inverter FR-D720S-0.1K-CHT Three-Phase
Introduction: D700 products are multi-functional, compact products with universal flux vector control mode: in the case of 1HZ, the torque can be increased to 150%, and the floating roller control and triangle wave function can be expanded; With safe stop function: There are two ways to achieve emergency stop: by controlling the MC contactor to cut off the conveyor.
|
|
Mitsubishi inverter FR-D740-050SC-EC three-phase 2.2kW
Introduction: Mitsubishi Drive, FR-D740 Series, 2.2 kW, 400 V AC, IP20, 0.2 400Hz, 5 A • Simple wiring, integrated spring clip quick connect control cable and power cord ensure simple cabling and reliability. • Simple parameterization software FR-Configuration ...
|
|
Mitsubishi inverter FR-A840-2.2K 3-phase 380-500V
Introduction: FR-A800 series inverter adopts independent design of rectifier inverter (315kW and above), and enhances the system safety function, plus compatible with a variety of mainstream network communication (CC-1ink, SSCNETIII/H, DeviceNet, PROFIBUS-DP and Ethernet, etc.), so that you can easily adapt to the ...
|
|
FR-D740-012SC-EC Japan Mitsubishi/Mitsubishi Electric inverter
FR-D740-012SC-EC Introduction: Mitsubishi Drive, FR-D740 Series, 0.4 kW, 400 V ac, IP20, 0.2 400Hz, 1.2 A • Simple cabling with integrated spring clip quick-connect control cable and power cord ensures simple cabling and reliability. •Simple...
|
|
FR-E740-095SC-EC Japan Mitsubishi/Mitsubishi Electric inverter
FR-E740-095SC-EC Introduction: Mitsubishi Inverter, FR-E740 Series, 3.7 kW, 400 V ac, IP20, 0.2 → 400Hz, 9.5 AFR – The E700 SC inverter series is a family of compact drive solutions designed to be a family of compact drive solutions designed to be the most accessible inverter with single-phase input and three-phase ...
|
|
Mitsubishi inverter FR-A820-11K-1 3-phase 200~240V
Introduction: Mitsubishi inverter FR-A820-11K-1 is suitable for motor capacity SLD 15, LD 15, ND (initial setting) 11, HD 7.5, built-in brake transistor, rated capacity SLD 24, LD 22, ND (initial setting) 18, HD 13
...
|
|