Q01UCPU Introduction: Mitsubishi PLC CPU, Q-Series for use with MELSEC Q-Series, 1024 I/O ports, Ethernet, 60 kB programming capacity, rack-mount 32 MB These basic sequence CPUs provide an economical entry-level Q-Series model for small-scale systems. Integrated PSU, CPU, and base unit are available to simplify system architecture, with Q00UJCPU/Q00JCPU providing comprehensive Q-Series networking and communication capabilities, including CC-Link IE 100Mbit Ethernet, MELSECNET/H
Mitsubishi/Mitsubishi Electric _Q01UCPU
Model features introduced
MELSECQ-CPU These basic series CPUs provide an economical entry-level Q-Series model for small-scale systems.
Provides an integrated PSU, CPU, and base unit to simplify system architecture, with Q00UJCPU/Q00JCPU to provide comprehensive Q-Series networking and communication capabilities, including CC-LinkIE100Mbit Ethernet, MELSECNET/H built-in serial communication, flash memory via CPU port, programming and parametric safety features compatible with Q-Series Smart Function Utility Configuration Tools
Model parameters are introduced| attribute | numeric value | | Used in: | MELSECQ series | | Manufacturer series | Q Series | | Enter the number | 1024 | | Number of outputs | 8192 | | The type of network | Ethernet | | The type of communication port | USB | | Programmable capacity | 60kB | | Programming interface | MiniUSB | | width | 98mm | | memory | 32MB | | length | 27.4mm | | Installation type | Rack mounting | | size | 27.4x98x89.3mm | | depth | 89.3mm |
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.
The above is the Japan brand Mitsubishi/Mitsubishi Electric model for the Q01UCPU product, the introduction of this product is: Mitsubishi PLC CPU, Q series, used in MELSEC Q series, 1024 I/O ports, Ethernet, 60 kB programming capacity, rack mount installation 32 MB, the purpose of 76 technology is to survive by quality, develop by reputation, and eternity by service, give us a chance, and give you a surprise.
|
More on that
|
Mitsubishi/Mitsubishi R04CPU CPU Module
R04CPU Introduction: Mitsubishi/Mitsubishi Electric PLC iQ-R Series; Programmable Controller CPU, 40K steps
Series: MELSEC IQ-R Series
Type: Standard CPU
Program memory: 40k races
Program Memory Unit: Steps
Local I/O points: 4096 ...
|
|
FX3S-10MR-ES Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-10MR-ES Introduction:Mitsubishi PLC CPU, FX3S Series, For Use With FX3 Series, 10 I/O Ports, Ethernet,Modbus, 4000 Step Programming Capacity, Wall Mount, 100 → 240 V AC Category 4000 Step FX3S is a ready-to-install PLC solution ...
|
|
Mitsubishi PLC FX5U-64MT/DS DC16.8~28.8V
Introduction: Mitsubishi PLC FX5U-64MT/DS DC24V supply power supply is less than 770mA (power supply voltage is 560mA when DC16.8-19.2V), DC5V built-in power supply is less than 1100mA (power supply voltage is DC16.8-19.2V 975mA).
...
|
|
FX3S-20MT-ESS Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-20MT-ESS Introduction:Mitsubishi PLC CPU, FX3S Series, Used in FX3 Series, 20 I/O Ports, Ethernet,Modbus, 4000 Step Programming Capacity, Wall Mount, 100 → 240 V AC Category 4000 Step FX3S is a ready-to-install PLC solution ...
|
|
FX3S-30MT/ES-2AD Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-30MT/ES-2AD Introduction: Mitsubishi PLC CPU, FX3S Series, For Use With FX3 Series, 30 I/O Ports, Ethernet, Modbus, 4000 Step Programming Capacity, DIN Rail Mounting, 100 → 240 V AC Category 16000FX3S is a ready-to-install PLC solution ...
|
|
Mitsubishi Electric PLC FX1S-10MR-001 6,4 point relay output
Introduction: FX1S has the characteristics of small package, low cost, multi-function, wide use base, etc., the number of control points is 10 to 30 points, it is easy to change the value of the analog quantity or timer using the analog potentiometer front plate adjustment tool, and the output power supply capacity of the 24VDC power supply is up to 400mA, which can reliably ensure the external connection.
|
|
FX3S-30MR-ES Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-30MR-ES Introduction:Mitsubishi PLC CPU, FX3S Series, For Use With FX3 Series, 30 I/O Ports, Ethernet, Modbus, 4000 Step Programming Capacity, Wall Mount, 100 → 240 V AC Category 4000 Step FX3S is a ready-to-install PLC solution ...
|
|
Mitsubishi PLC FX5U-80MT/DS source/drain 40 point input
Introduction: Mitsubishi PLC FX5U-80MT/DS input signal form no voltage contact input leakage NPN open collector transistor, source PNP open collector transistor, input response time (H/W filter delay) X000-X005: less than 2.5μs when ON, less than 2.5μ when OFF.
...
|
|
Mitsubishi PLC FX3U-48MT/ES-A 24-point input and output
Introduction: Mitsubishi PLC FX3U-48MT/ES-A 24-point input and output, detachable terminal strip (M3 bolt) input and output connection shape, input sensitivity current of 3.5mA (X000-X005), 4.5mA (X006, X007).
...
|
|
FX3S-14MT-DSS Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-14MT-DSS Introduction:Mitsubishi PLC CPU, FX3S Series, Used in FX3 Series, 14 I/O Ports, Ethernet,Modbus, 4000 Step Programming Capacity, DIN Rail Mounting, 24 V DC Category 16000 (EEPROM) Step FX3S is a ready-to-install PLC solution ...
|
|
Mitsubishi PLC FX3SA-10MR-CM AC100~240V
Introduction: Mitsubishi PLC FX3SA-10MR-CM allows the instantaneous power failure time to continue operation in the event of an instantaneous power failure below l0ms, with an inrush current of up to 15A 5ms or less/AC100V, and a maximum of 28A 5ms or less/AC200V.
Product parameters
...
|
|
Mitsubishi PLC FX3SA-20MR-CM load DC5V 2mA
Introduction: FX3SA is a new model that expands the basic performance of the basic model FX1S, which is suitable for various fields of small-scale equipment that require analog and Ethernet and MODBUS functions, and has analog and communication functions.
|
|
Mitsubishi PLC FX3S-30MR/ES-2AD DIN rail mounting
Introduction:Mitsubishi PLC CPU, FX3S Series, For Use With FX3 Series, 30 I/O Ports, Ethernet, Modbus, 4000 Step Programming Capacity, DIN Rail Mounting, 100 → 240 V AC Category The 16000FX3S is a ready-to-install PLC solution for those who need ...
|
|
Mitsubishi PLC FX3U-32MT/ES-A AC100~240V
Introduction: The input response time of Mitsubishi PLC FX3U-32MT/ES-A is about 10ms, and the operation of the body will not be affected if the instantaneous power failure range is within 10ms. DC24V additional power supply 16-32 400mA or less, 48-128 600mA or less.
...
|
|
FX5UC-32MT/DSS Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX5UC-32MT/DSS Introduction: Mitsubishi PLC CPU, MELSEC iQ-F Series, For Use With FX5 Expansion Adapter, FX5 Expansion Module, 16 I/O Ports, 128 kB Programming Capacity, Desktop Mount, 5 V DC, 24 V DC CategoryMitsubishi's iQ-F Series ...
|
|
FX3S-10MT-DSS Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-10MT-DSS Introduction:Mitsubishi PLC CPU, FX3S Series, Used in FX3 Series, 10 I/O Ports, Ethernet,Modbus, 4000 Step Programming Capacity, DIN Rail Mounting, 24 V DC Category 16000 (EEPROM) Step FX3S is a ready-to-install PLC solution ...
|
|
FX3S-20MR-DS Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-20MR-DS Introduction:Mitsubishi PLC CPU, FX3S Series, Used in FX3 Series, 20 I/O Ports, Ethernet,Modbus, 4000 Step Programming Capacity, DIN Rail Mounting, 24 V DC Category 16000 (EEPROM) Step FX3S is a ready-to-install PLC solution ...
|
|
FX3S-14MT-ESS Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-14MT-ESS Introduction:Mitsubishi PLC CPU, FX3S Series, Used in FX3 Series, 14 I/O Ports, Ethernet,Modbus, 4000 Step Programming Capacity, Wall Mount, 100 → 240 V AC Category 4000 Step FX3S is a ready-to-install PLC solution ...
|
|
FX3S-30MT/ESS-2AD Japan Mitsubishi/Mitsubishi Electric PLC CPU
FX3S-30MT/ESS-2AD Introduction: Mitsubishi PLC CPU, FX3S Series, For Use With FX3 Series, 30 I/O Ports, Ethernet, Modbus, 4000 Step Programming Capacity, DIN Rail Mounting, 100 → 240 V AC Category 16000FX3S is a ready-to-install PLC solution ...
|
|
Mitsubishi PLC FX3G-40MR/ES-A 24 dots DC24V ±10%
Introduction: Mitsubishi FX3G-40MR/ES-A PLC has built-in CPU, power supply, input and output. Maintain the convenience of the FX1N while improving performance. It can be installed with special adapters and function expansion boards of the FX3 series for high-speed computing and processing.
...
|
|
Contact
working hours
